search

yossato / virtualGimbal

virtualGimbal is an electronic stabilize device for videos that were taken by hand held camera. (I.e. DSLR)
162 stars 29 forks source link

Support for Gyroflow #31

Open WriteCodeEveryday opened 2 years ago

WriteCodeEveryday commented 2 years ago

@yossato, are you still doing this project?

I'm interested in this with the rise of Gyroflow and would love to buy one unit or figure out how to put one together for Gyroflow.

I'd love to do this for SD cards and microSD cards so if you are still working on this project, I would love to get into this.

yossato commented 2 years ago

I’m doing this project until now. I made a prototype but it consumes time to make. There some issues that prevent this to be mass production below.

First, a SD card housing made with nylon 3D print is easily broken. Second, signal quality is not good so there is a compatibility issue. Some camera doesn’t recognize it as a SD card. I need help to improve these problems.

WriteCodeEveryday commented 2 years ago

@yossato Why not switch the housing to flexible materials like TPU? Not really shock absorbing but hard to break. "Signal quality" like the signal quality in electronics or in the actual gyro output? I'll help you out with anything but my electronics/PCB knowledge isn't super good.