"Making new" QNX System

[ghost]

Hello you (: after delving into the subject of the procedure that I have to go through to re-create and upload the qnx system, I have only two questions, which depend on whether I will take it at all, write back when you have time, no pressure.

1. Is there no other way to connect to the unit to perform formatting than just by "emmc method" ? For example, as does EMERGENCY? Because I think it will overwhelm me ...

2. Does a unit like mine have a separate memory bank, something like in PC's - HDD, to possibly remove it and "work "on it, that is, to format / create partitions after the storing unit? Or is it an integral part of the motherboard?

If both of the above answers are bad, you probably understand yourself, is there a chance (because it did not happen before, only when we started to "play" with commands in my unit it started to restart at startup) to at least "prevent" these resets at the start of the unit? Because as I already wrote, it is very irritating.

Thank you for everything and I hope you don't blame me for digging up the topic (:

[yox2019]

To be honest, this unit is an old trash, but if you want to revive it, its up to you. so, ...if you want to format it, you have to connect it as an external hard drive, just like in windows you cant format the partition with running system. Unfortunately, there is no other (free) way to connect this unit as an external drive

Do not write that the radio started to restart after you typed the commands, what your opinion might have gone wrong after typing the copy / paste command?

... you can do emmergency again and then without the toolbox installed, check if the problem persists

[ghost]

To be honest, this unit is an old trash, but if you want to revive it, its up to you. so, ...if you want to format it, you have to connect it as an external hard drive, just like in windows you cant format the partition with running system. Unfortunately, there is no other (free) way to connect this unit as an external drive Do not write that the radio started to restart after you typed the commands, what your opinion might have gone wrong after typing the copy / paste command? ... you can do emmergency again and then without the toolbox installed, check if the problem persists

You wrote that "there is no other (free) way to connect this unit as an external drive" how well did I understand - no other way than by "emmc" as on the picture i send in first post?

As for restarting, you remember that you mentioned / discussed with @Iprot that something is wrong with the startup file, below is the screen from the discussion where after the next EMERGENCY, unit started restarting, then when you wanted me to send you the "main" and "startup" files, something was wrong with SD slots and cards, I remembered that much, and the commands do not tell me anything, so I count on your reliable memory (:

As for this device, I already know iys old, you made me aware, but I hope that with your hints, without big excessive, I will manage to get involved, maybe not give it a new life, but that it will serve me a little longer, if you want to support me, because frankly speaking, I don't have anyone as overwhelmed as you to turn to, thank you.

[yox2019]

.. my friend, there is no point in further discussion with you, I also do not have time for this, read a little about how qnx works, the radio has a hint: if you did emergency ; EVERYTHING is back to pre-installation condition toolbox or adding any patch, there is no more startup_main... as if you installed a new windows system do you understand?

P.S "startup_main" was created by the "CP PATCH" now after emergency is gone

[ghost]

.. my friend, there is no point in further discussion with you, I also do not have time for this, read a little about how qnx works, the radio has a hint: if you did emergency ; EVERYTHING is back to pre-installation condition toolbox or adding any patch, there is no more startup_main... as if you installed a new windows system do you understand? P.S "startup_main" was created by the "CP PATCH" now after emergency is gone

What? Man, listen, you had to back off before turning me back to ... You wrote that when you come back from vacation (probably at Uncle Adolf's) you will do a patch, I waited, before you told me to type some fucking things, you should use your brain. If this is too much for you, then you have to admit it and not wade into it, programmer from seven pains ... I know one thing, before of your f**** tool, I did not have problems with restarting radio, back camera and so on...., also i tapet this there, that my radio is restarting 3 times, so you wrote "wait untill it stops", so... You know about it but you pretended to be a great programmer as everyone read, now you have no idea what to argue. .. and you withdraw. If your tool affects the safety of my family, I will find you, remember ... And do not call me "friend" because you have no idea who you are writing with. Do you think that if I report the alleged crime, you will be able to convince the prosecutor? Or maybe we'll see? I want to see it, wait...

[yox2019]

what? go to doctor idiot ... if you have a problem with this scrap after installing "cp patch", write to the author of the patch here: https://github.com/olli991/mib-std2-pq-zr-toolbox

...and stop aging me, asshole