Open shawe opened 2 years ago
Still having the same issue, and I must set manually the fan speed to work.
Also, I see that I must reload the page, if I don't do that, the fan speed is not setted, always jump to zero without reload the page.
This time seems to be changed at any point needed to 100%, but stop changing in another to 50%:
On previous 1.6.X seems to work fine for me, but (at least) with latest OctoPrint 1.7.2, it changes to 0 when it will remain to another value from gcode.
I'm using PrusaSlicer 2.3.3 before the problem and now, then I understand that slicer is not causing the problem. Also the fan is setted always on to 35% except first layer.
I think some times that the little board for IRF520 I bought that do the work of your schema was damaged, but no, if I manually increase the value, the fan start working again.
Any idea what log I can attach to try to detect what is failling? This plugin was essential to me to have a normal function of the fan because the mosfet on board is damaged and I solved easly thanks to you and this plugin.