Open scoopex opened 5 years ago
Smartmon attributes a shown in a different ways for SAS drives:
# smartctl -A /dev/sdd smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.13.0-39-generic] (local build) Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org === START OF READ SMART DATA SECTION === Current Drive Temperature: 47 C Drive Trip Temperature: 60 C Manufactured in week 19 of year 2017 Specified cycle count over device lifetime: 10000 Accumulated start-stop cycles: 73 Specified load-unload count over device lifetime: 300000 Accumulated load-unload cycles: 248 Elements in grown defect list: 0 Vendor (Seagate) cache information Blocks sent to initiator = 2352886376 Blocks received from initiator = 2798401440 Blocks read from cache and sent to initiator = 2753243204 Number of read and write commands whose size <= segment size = 354522558 Number of read and write commands whose size > segment size = 826287 Vendor (Seagate/Hitachi) factory information number of hours powered up = 4301.02 number of minutes until next internal SMART test = 37 # smartctl -A /dev/sdd smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.13.0-39-generic] (local build) Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org === START OF READ SMART DATA SECTION === SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000e 130 130 039 Old_age Always - 4294967295 5 Reallocated_Sector_Ct 0x0033 100 100 001 Pre-fail Always - 0 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 4225 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 25 13 Read_Soft_Error_Rate 0x001e 130 130 000 Old_age Always - 30064771071 170 Unknown_Attribute 0x0033 100 100 010 Pre-fail Always - 0 174 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 23 179 Used_Rsvd_Blk_Cnt_Tot 0x0033 100 100 010 Pre-fail Always - 0 180 Unused_Rsvd_Blk_Cnt_Tot 0x0032 100 100 000 Old_age Always - 18415 181 Program_Fail_Cnt_Total 0x003a 100 100 000 Old_age Always - 0 182 Erase_Fail_Count_Total 0x003a 100 100 000 Old_age Always - 0 184 End-to-End_Error 0x0032 100 100 000 Old_age Always - 0 194 Temperature_Celsius 0x0022 100 100 000 Old_age Always - 26 195 Hardware_ECC_Recovered 0x0032 100 100 000 Old_age Always - 0 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 100 100 000 Old_age Always - 0 201 Unknown_SSD_Attribute 0x0033 100 100 010 Pre-fail Always - 236778632690 202 Unknown_SSD_Attribute 0x0027 100 100 000 Pre-fail Always - 0 225 Unknown_SSD_Attribute 0x0032 100 100 000 Old_age Always - 675098 226 Unknown_SSD_Attribute 0x0032 100 100 000 Old_age Always - 102400 227 Unknown_SSD_Attribute 0x0032 100 100 000 Old_age Always - 0 228 Power-off_Retract_Count 0x0032 100 100 000 Old_age Always - 361041458 232 Available_Reservd_Space 0x0033 100 100 010 Pre-fail Always - 0 233 Media_Wearout_Indicator 0x0032 100 100 000 Old_age Always - 675098 234 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 241 Total_LBAs_Written 0x0032 100 100 000 Old_age Always - 675098 242 Total_LBAs_Read 0x0032 100 100 000 Old_age Always - 425912 245 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 100
Smartmon attributes a shown in a different ways for SAS drives: