Add a fuse/relay box and add a wiring harness

[zachseifts]

The jeep needs to be rewired with modern relays. I've already ordered some from amazon.

Parts needed

• GOOACC 6 Pack Automotive Relay Harness Set 5-Pin 30/40A 12V SPDT with Interlocking Relay Socket and Harnesses,2 years Warranty
• Yueton 100pcs Female Fully Insulated Wire Crimp Terminal Nylon Quick Connectors Wiring Spade
• KKmoon DC 12V 10 Way Blade Fuse Box Holder with LED Warning Light Kit for Car Boat Marine Trike
• 5 Pcs Dual Row 12 Position Screw Terminal Strip 600V 15A + 400V 15A 12 Postions Pre Insulated Terminal Barrier Strip Red /Black 10 Pcs
• Absolute USA SLT38 3/8-Inch x 100-Feet Split Loom Tube

[zachseifts]

What has arrived so far:

• Relays and connectors
• Fuse block
• Terminal block
• Switches

Need to get:

• 15 amp fuses

[zachseifts]

Okay, I have all of the parts except the fuses and the basic plan for how I'm going to put this together.

[zachseifts]

This is the general layout of the relays, fuses and terminal blocks. The terminal blocks are stacked:

• 30 - bottom
• 87a - middle
• 87 & 85 - top

[zachseifts]

Wiring harness is designed and somewhat implemented.

[zachseifts]

The relay/fuse box is pretty much ready to go in. Everything has been wired in and shrink wrapped. I need to find somewhere to mount it.

[zachseifts]

Ordered a box and decided that it will live under the passenger seat. I also picked up a breaker for it.

[zachseifts]

Current look at the wiring diagram:

[zachseifts]

The box has been bolted in and I'm about to start cutting holes in it to mount hardware.

[zachseifts]

It's getting there, fuel pump, ignition and tach are wired in.

[zachseifts]

[zachseifts]

It is installed and ready to be wired in.