USB keyboard with USB HUB on beagleboard

[GoogleCodeExporter]

What steps will reproduce the problem?
1.Enabled all USB stuff and input devices in menuconfig
2.compiled rootfs
3.compiled uImage

What is the expected output? What do you see instead?
I was expecting to be able to use mouse and keyboard with USB hub on
beagleboard and to use it with regular monitor. I can't see mouse cursor
and keyboard is not responding to keypresses. When Android boots up it
recognized the USB keyboard and USB HUB and enumerates them.

What version of the product are you using? On what operating system?

Please provide any additional information below.
I'm using beagleboard C3, USB HUB, USB keyboard and USB mouse and regular
monitor.

Original issue reported on code.google.com by petri.ko...@gmail.com on 7 Mar 2010 at 4:01

[GoogleCodeExporter]

Make sure you power the USB hub with an external power supply. 

Original comment by arashe...@gmail.com on 28 May 2010 at 4:39

[GoogleCodeExporter]

I am having the same problems with rev C4 that don't occur with Angstrom's .32 
kernel.  Keyboard, mouse, trendnet ethernet, none of it works.  In fact, with 
the hub connected the SD card doesn't work.

Original comment by cjohnson...@gmail.com on 15 Jul 2010 at 1:52

[GoogleCodeExporter]

I'm receiving such messages in serial console when USB mouse,which connected 
via powered USB Hub, is moving:
usb 1-2.4: input irq status -75  received
usb 1-2.4: input irq status -75  received

Original comment by konstant...@gmail.com on 25 Jan 2011 at 3:28

• Added labels: FroYo, Target-BeagleBoard

[GoogleCodeExporter]

Hi to all, are you connecting the keyboard through the USB or USB OTG (the 
small one)?

When I connect the USB HUB with a keyboard and mouse to the big USB neither 
works but connecting them to the USB OTG seems to work OK (you'll need a 
special cable).

Original comment by flamealc...@gmail.com on 25 Jan 2011 at 7:41