search

zainhom / rowboat

Automatically exported from code.google.com/p/rowboat
0 stars 0 forks source link

inti:untracked pid XXX exited #95

Open GoogleCodeExporter opened 8 years ago

GoogleCodeExporter commented 8 years ago 

I have a issue when I run android+linux2.6.28 on  S3C6410   board..// the 
minicom show this issue  and restart repeatly

yaffs_read_super: isCheckpointed 0                                              
VFS: Mounted root (yaffs2 filesystem) on device 31:2.                           
Freeing init memory: 260K                                                       
Warning: unable to open an initial console.                                     
init: cannot open '/initlogo.rle'                                               
save exit: isCheckpointed 1                                                     
init: cannot find '/system/bin/dbus-daemon', disabling 'dbus'                   
init: cannot find '/system/etc/install-recovery.sh', disabling 'flash_recovery' 
sh: can't access tty; job control turned off                                    
$ warning: `rild' uses 32-bit capabilities (legacy support in use)              
s3c-nand: 1 bit(s) error detected, corrected successfully                       
s3c-nand: 1 bit(s) error detected, corrected successfully                       
request_suspend_state: wakeup (3->0) at 36246690002 (2011-05-01 20:09:37.070710)
init: untracked pid 605 exited                                                  
init: untracked pid 609 exited                                                  
request_suspend_state: wakeup (0->0) at 53628185002 (2011-05-01 20:09:54.452206)
init: untracked pid 691 exited                                                  
init: untracked pid 692 exited                                                  
request_suspend_state: wakeup (0->0) at 71042436002 (2011-05-01 20:10:11.866457)
init: untracked pid 747 exited                                                  
init: untracked pid 749 exited                                                  
request_suspend_state: wakeup (0->0) at 88325143002 (2011-05-01 20:10:29.149164)
init: untracked pid 805 exited                                                  
init: untracked pid 807 exited                                                  
request_suspend_state: wakeup (0->0) at 105847023002 (2011-05-01 20:10:46.67104)
init: untracked pid 861 exited                                                  
init: untracked pid 863 exited

Original issue reported on code.google.com by 0.00001p...@gmail.com on 1 May 2011 at 6:13

GoogleCodeExporter commented 8 years ago 
hi 0.00001percent, could you able to found solution.?
I am too facing same issue. Can anyone of project member help us... ?

Original comment by pawan.s....@gmail.com on 14 Jul 2011 at 12:14

GoogleCodeExporter commented 8 years ago 
Rowboat supports only TI devices.
But could you post the output of logcat? We may able to tell what the problem 
could be.

Original comment by vishvesh...@aim.com on 15 Jul 2011 at 10:05

GoogleCodeExporter commented 8 years ago 
ok, here it is :
Texas Instruments X-Loader 1.46 (Dec 12 2010 - 17:37:03)

U-Boot 2009.11 (Sep 04 2010 - 15:35:38)

OMAP34xx/35xx-GP ES2.0, CPU-OPP2 L3-165MHz
VAR-SOM-OM3xxx Board + LPDDR/NAND
I2C:   ready
DRAM:  256 MB
NAND:  512 MiB
In:    serial
Out:   serial
Err:   serial
Net:   smc911x-0
Warning: smc911x-0 MAC addresses don't match:
Address in SROM is         ff:ff:ff:ff:ff:ff
Address in environment is  f8:dc:7a:00:17:32

Hit any key to stop autoboot:  0 
mmc1 is available
reading uImage

2438592 bytes read
## Booting kernel from Legacy Image at 80000000 ...
   Image Name:   Linux-2.6.32
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    2438528 Bytes =  2.3 MB
   Load Address: 80008000
   Entry Point:  80008000
   Verifying Checksum ... OK
   Loading Kernel Image ... OK
OK

Starting kernel ...

Uncompressing 
Linux...........................................................................
.............................................................................. 
done, booting the kernel.
Linux version 2.6.32 (orokach@park) (gcc version 4.4.1 (Sourcery G++ Lite 
2009q3-67) ) #1 Sun Jan 9 20:18:37 IST 2011
CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c53c7f
CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
Machine: Variscite VAR-SOM-OM3X
Memory policy: ECC disabled, Data cache writeback
OMAP3630/DM3730 ES1.0 (l2cache iva sgx neon isp 192mhz_clk )
SRAM: Mapped pa 0x40200000 to va 0xfe400000 size: 0x100000
Reserving 4194304 bytes SDRAM for VRAM
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 65024
Kernel command line: init=/init console=ttyS2,115200n8 noinitrd ip=off 
androidboot.console=ttyS2 rootwait mem=256M omap_vout.vid1_static_vrfb_alloc=y 
rw ubi.mtd=4 rootfstype=ext3 root=/dev/mmcblk0p2 bootdel0
PID hash table entries: 1024 (order: 0, 4096 bytes)
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 256MB = 256MB total
Memory: 250240KB available (4212K code, 824K data, 168K init, 0K highmem)
Hierarchical RCU implementation.
NR_IRQS:402
Clocking rate (Crystal/Core/MPU): 26.0/400/800 MHz
GPMC revision 5.0
IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts
Total of 96 interrupts on 1 active controller
OMAP GPIO hardware version 2.5
OMAP clockevent source: GPTIMER1 at 32768 Hz
Console: colour dummy device 80x30
Calibrating delay loop... 799.29 BogoMIPS (lpj=3121152)
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
regulator: core version 0.5
NET: Registered protocol family 16
Target VDD1 OPP = 4, VDD2 OPP = 2
OMAP DMA hardware revision 5.0
bio: create slab <bio-0> at 0
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
i2c_omap i2c_omap.1: bus 1 rev4.0 at 2600 kHz
twl4030: PIH (irq 7) chaining IRQs 368..375
twl4030: power (irq 373) chaining IRQs 376..383
twl4030: gpio (irq 368) chaining IRQs 384..401
regulator: VUSB1V5: 1500 mV normal standby
regulator: VUSB1V8: 1800 mV normal standby
regulator: VUSB3V1: 3100 mV normal standby
twl4030_usb twl4030_usb: Initialized TWL4030 USB module
regulator: VMMC1: 1850 <--> 3150 mV normal standby
regulator: VDAC: 1800 mV normal standby
regulator: VAUX2_4030: 2800 mV normal standby
regulator: VPLL2: 1800 mV normal standby
regulator: VSIM: 1800 <--> 3000 mV normal standby
i2c_omap i2c_omap.2: bus 2 rev4.0 at 400 kHz
i2c_omap i2c_omap.3: bus 3 rev4.0 at 400 kHz
Switching to clocksource 32k_counter
musb_hdrc: version 6.0, musb-dma, otg (peripheral+host), debug=0
musb_hdrc: USB OTG mode controller at fa0ab000 using DMA, IRQ 92
NET: Registered protocol family 2
IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
TCP established hash table entries: 8192 (order: 4, 65536 bytes)
TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP reno registered
UDP hash table entries: 256 (order: 0, 4096 bytes)
UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
NET: Registered protocol family 1
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
omap-iommu omap-iommu.0: isp registered
NetWinder Floating Point Emulator V0.97 (double precision)
ashmem: initialized
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
JFFS2 version 2.2. (NAND) �© 2001-2006 Red Hat, Inc.
msgmni has been set to 489
alg: No test for stdrng (krng)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
OMAP DSS rev 2.0
OMAP DISPC rev 3.0
OMAP VENC rev 2
OMAP DSI rev 1.0
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
serial8250.0: ttyS0 at MMIO 0x4806a000 (irq = 72) is a ST16654
serial8250.1: ttyS1 at MMIO 0x4806c000 (irq = 73) is a ST16654
serial8250.2: ttyS2 at MMIO 0x49020000 (irq = 74) is a ST16654
console [ttyS2] enabled
brd: module loaded
loop: module loaded
smsc911x: Driver version 2008-10-21.
smsc911x-mdio: probed
eth0: attached PHY driver [SMSC LAN8700] (mii_bus:phy_addr=ffffffff:01, irq=-1)
smsc911x: get mac from cmd line.
ethaddr parsed from commandline: f8:dc:7a:00:17:32
net eth0: MAC Address: f8:dc:7a:00:17:32
usbcore: registered new interface driver cdc_ether
usbcore: registered new interface driver dm9601
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-omap ehci-omap.0: OMAP-EHCI Host Controller
ehci-omap ehci-omap.0: new USB bus registered, assigned bus number 1
ehci-omap ehci-omap.0: irq 77, io mem 0x48064800
ehci-omap ehci-omap.0: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
android init
android_probe pdata: c047d740
android_bind
android_usb gadget: android_usb ready
musb_hdrc musb_hdrc: MUSB HDRC host driver
musb_hdrc musb_hdrc: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 1 port detected
f_adb init
android_register_function adb
adb_bind_config
f_mass_storage init
android_register_function usb_mass_storage
mice: PS/2 mouse device common for all mice
ads7846 spi1.0: touchscreen, irq 337
input: ADS7846 Touchscreen as 
/devices/platform/omap2_mcspi.1/spi1.0/input/input0
using rtc device, twl_rtc, for alarms
twl_rtc twl_rtc: rtc core: registered twl_rtc as rtc0
twl_rtc twl_rtc: Power up reset detected.
twl_rtc twl_rtc: Enabling TWL-RTC.
i2c /dev entries driver
Linux video capture interface: v2.00
omap-iommu omap-iommu.0: isp: version 1.1
usbcore: registered new interface driver uvcvideo
USB Video Class driver (v0.1.0)
OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
logger: created 64K log 'log_main'
logger: created 256K log 'log_events'
logger: created 64K log 'log_radio'
logger: created 64K log 'log_system'
Advanced Linux Sound Architecture Driver Version 1.0.21.
usbcore: registered new interface driver snd-usb-audio
No device for DAI omap-mcbsp-dai-0
No device for DAI omap-mcbsp-dai-1
No device for DAI omap-mcbsp-dai-2
No device for DAI omap-mcbsp-dai-3
No device for DAI omap-mcbsp-dai-4
usb 1-1: new high speed USB device using ehci-omap and address 2
asoc: twl4030 <-> omap-mcbsp-dai-0 mapping ok
ALSA device list:
  #0: var_snd_soc_card (twl4030)
TCP cubic registered
NET: Registered protocol family 17
NET: Registered protocol family 15
Power Management for TI OMAP3.
Unable to set L3 frequency (400000000)
Switched to new clocking rate (Crystal/Core/MPU): 26.0/400/1000 MHz
IVA2 clocking rate: 800 MHz
SmartReflex driver initialized
VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
mmc0: new high speed SDHC card at address 951e
mmcblk0: mmc0:951e SD04G 3.69 GiB 
 mmcblk0:
twl_rtc twl_rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800)
omapdss DPI error: display already enabled
omap_vout omap_vout: 'lcd' Display already enabled
omapdss DPI error: display already enabled
omap_vout omap_vout: 'lcd' Display already enabled
omap_vout omap_vout: Buffer Size = 3686400
 p1 p2 p3
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 3 ports detected
omap_vout omap_vout: : registered and initialized video device 0
omap_vout omap_vout: Buffer Size = 3686400
omap_vout omap_vout: : registered and initialized video device 1
kjournald starting.  Commit interval 5 seconds
EXT3-fs (mmcblk0p2): using internal journal
EXT3-fs (mmcblk0p2): mounted filesystem with writeback data mode
VFS: Mounted root (ext3 filesystem) on device 179:2.
Freeing init memory: 168K
Warning: unable to open an initial console.
init: cannot find '/system/bin/wifi/rc.wifi', disabling 'wl12xx'
init: cannot find '/system/etc/install-recovery.sh', disabling 'flash_recovery'

# enabling adb
adb_open
warning: `zygote' uses 32-bit capabilities (legacy support in use)
request_suspend_state: wakeup (3->0) at 43887298587 (2000-01-01 
00:00:42.580413818 UTC)
init: untracked pid 811 exited
request_suspend_state: wakeup (0->0) at 47990875246 (2000-01-01 
00:00:46.683959960 UTC)
init: untracked pid 953 exited
request_suspend_state: wakeup (0->0) at 51750762943 (2000-01-01 
00:00:50.443878174 UTC)
init: untracked pid 976 exited
request_suspend_state: wakeup (0->0) at 57886627200 (2000-01-01 
00:00:56.579742431 UTC)
init: untracked pid 998 exited

then it goes to infinite loop 
processes are :

USER     PID   PPID  VSIZE  RSS     WCHAN    PC         NAME
root      1     0     268    184   c00bb9ec 0000875c S /init
root      2     0     0      0     c006f894 00000000 S kthreadd
root      3     2     0      0     c0062ad8 00000000 S ksoftirqd/0
root      4     2     0      0     c00859c8 00000000 S watchdog/0
root      5     2     0      0     c006cb9c 00000000 S events/0
root      6     2     0      0     c006cb9c 00000000 S khelper
root      10    2     0      0     c0074b68 00000000 S async/mgr
root      13    2     0      0     c006cb9c 00000000 S suspend
root      194   2     0      0     c0099cd0 00000000 S sync_supers
root      196   2     0      0     c009a4c4 00000000 S bdi-default
root      198   2     0      0     00000000 00000000 R kblockd/0
root      207   2     0      0     c006cb9c 00000000 S omap2_mcspi
root      218   2     0      0     c006cb9c 00000000 S ksuspend_usbd
root      222   2     0      0     c01fb368 00000000 S khubd
root      225   2     0      0     c022284c 00000000 S kseriod
root      233   2     0      0     c006cb9c 00000000 S twl4030-irqchip
root      234   2     0      0     c01d2160 00000000 S twl4030-irq
root      259   2     0      0     c006cb9c 00000000 S kmmcd
root      274   2     0      0     c006cb9c 00000000 S musb_hdrc
root      276   2     0      0     c006cb9c 00000000 S rpciod/0
root      285   2     0      0     c0085ba0 00000000 S khungtaskd
root      286   2     0      0     c0095070 00000000 S kswapd0
root      288   2     0      0     c006cb9c 00000000 S aio/0
root      289   2     0      0     c006cb9c 00000000 S nfsiod
root      290   2     0      0     c006cb9c 00000000 S crypto/0
root      297   2     0      0     c01a3d08 00000000 S dsi
root      441   2     0      0     c01e46e4 00000000 S mtdblockd
root      495   2     0      0     c006cb9c 00000000 S kondemand/0
root      496   2     0      0     c006cb9c 00000000 S kconservative/0
root      502   2     0      0     c006cb9c 00000000 S usbhid_resumer
root      530   2     0      0     c026c880 00000000 S mmcqd
root      542   2     0      0     c01131b4 00000000 S kjournald
root      543   1     244    152   c00bb9ec 0000875c S /sbin/ueventd
root      802   1     736    332   c0060690 afd0c63c S /system/bin/sh
system    804   1     808    268   c027ad98 afd0b81c S 
/system/bin/servicemanager
root      806   1     3864   560   ffffffff afd0becc S /system/bin/vold
root      807   1     3840   528   ffffffff afd0becc S /system/bin/netd
root      808   1     684    300   c02af560 afd0c1ec S /system/bin/debuggerd
root      809   1     1272   540   c0072eb8 afd0becc S /system/bin/rild
bluetooth 812   1     1256   564   c00bb9ec afd0c82c S /system/bin/dbus-daemon
root      813   1     808    264   c02af560 afd0c1ec S /system/bin/installd
keystore  814   1     1744   424   c02af560 afd0c1ec S /system/bin/keystore
root      815   1     3352   156   ffffffff 00008294 S /sbin/adbd
root      858   2     0      0     c00c8620 00000000 S flush-179:0
root      860   2     0      0     c006cb9c 00000000 S pvr_timer/0
root      873   2     0      0     c006cb9c 00000000 S pvr_workqueue
root      1461  1     740    332   c0060690 afd0c63c S /system/bin/sh
media     1476  1     17952  4612  ffffffff afd0b81c S /system/bin/mediaserver
root      1478  802   896    308   00000000 afd0b57c R ps
root      1481  1     268    104   00000000 00008d3c R /init
root      1482  1461  740    240   c00ad9a0 afd0b61c D /system/bin/sh
# request_suspend_state: wakeup (0->0) at 152195739749 (2000-01-01 
00:02:30.888854980 UTC)
init: untracked pid 1476 exited

it is seems that something is wrong in  "system/bin/mediaserver" 
But I don't know what.

When I don't follow steps of DSP wiki and just download repo and do make, then 
everything works perfectly  but screen flickes on touch.

Original comment by pawan.s....@gmail.com on 15 Jul 2011 at 11:54

GoogleCodeExporter commented 8 years ago 
@pawan
1. you are able to get to the shell. Could you enter the 'logcat' command there 
and post the results.. that may give hints to why mediaserver died
2. re Screen flickering - this is possibly because the SGX graphics 
acceleration libraries are not installed. You can follow the steps given in the 
BuildAndConfigure guide to install SGX on your filesystem

Original comment by vishvesh...@aim.com on 18 Jul 2011 at 8:14

GoogleCodeExporter commented 8 years ago 
@vishveshwar 
Problem was some thing else. I am using gingerbread with DSP. There is a 
comment on Source wiki page that for gingerbread with DSP 

 "Regarding rowboat-gingerbread.xml or rowboat-gingerbread-dsp.xml: "vram=32M omapfb.vram=0:16M" need to be added to bootargs. Otherwise failed at "couldn't open framebuffer HAL (Bad address)". mem=128M should be increased to mem=512M (maybe). FYI"

After using logcat command, I saw that having same issue, So did as suggest 
above and problem resolved. And atlast Android runs perfectly.

Although mediaserver is still dies. try to look on that if won't able to 
resolve, then I will come back to you again. Thanks

Original comment by pawan.s....@gmail.com on 18 Jul 2011 at 11:00

GoogleCodeExporter commented 8 years ago 
Hi,

Did you enable battery service?
Is this happens exactly 60 seconds after you unplug the USB cable?
Your omap watchdog is set to 60 seconds, so I think you should print out time 
stamps on your kernel and see what happens 60 seconds before.

Gil

Original comment by gilzha...@gmail.com on 31 Aug 2011 at 8:05