search

zappanaut / usb-atx-ctrl

Using RP2040-Zero to control ATX operations via USB.
MIT License
22 stars 5 forks source link

How can I order those PCB's? #4

Open tobiashochguertel opened 5 months ago

tobiashochguertel commented 5 months ago

I want some of the these PCBs, but you don't sell them, or? Is it possible that you can provide instructions on how we can order the PCB from PCBWay https://www.pcbway.com/

PCBWay offers also to share the Project, so that others can easily order it. https://www.pcbway.com/project/

zappanaut commented 5 months ago

I don't sell the PCBs. I used JLCPCB, but the process should be the same for PCBWay. If you follow the link https://www.pcbway.com/QuickOrderOnline.aspx you can directly upload the gerber.zip. If you need fully assembled PCBs you are on your own, though. But if you want to go that route and are unsure about sourcing certain parts, feel free to ask.

tobiashochguertel commented 5 months ago

I can order the PCB also from JLCPCB, I think that doesn't make a big difference. It would be great when you share a screenshot(s) of the order configuration from JLCPCB so that I use the same values as you. I will then assemble it myself like you did it.

zappanaut commented 5 months ago

Here is a screenshot (actually these are just the defaults): Screenshot_JLCPCB

tobiashochguertel commented 5 months ago

There are also parts which have to be placed on the bottom, as I see in the positions.csv file, I'm right or? Can you please provide me a picture of the bottom side?

I try to order the PCBs with as many parts already assembled as possible.

zappanaut commented 5 months ago

Sure, here is a rendered image of the bottom side: Screenshot_20240215_175211 And a little disclaimer: I did not try the assembly service, but let me know how it went. :)