search

zapta / linbus

An Arduino based LINBUS stack and signal interceptor/injector.
184 stars 70 forks source link

OSH Park differs from source #22

Open clarkewd opened 7 years ago

clarkewd commented 7 years ago

The Injector on OSH Park is labeled "linbus Injector Version C Rev1" and has this layout:

827bc02839406c97d3ac14fa2afe58aa

That's different from the pdfs in injector/eagle and injector/eagle_991_mounted - probably doesn't make much difference - just curious about the discrepancy.

zapta commented 7 years ago

Hello,

I don't remember what the differences are but if you want, you can take a look at the history of the .brd file in github and see what the differences are.

I would think that the latest one is probably the best and you can upload it to oshpark.

Hope it helped.

Zapta

On Wed, Jun 7, 2017 at 11:50 AM, clarkewd notifications@github.com wrote:

The Injector on OSH Park is labeled "linbus Injector Version C Rev1" and has this layout:

[image: 827bc02839406c97d3ac14fa2afe58aa] https://user-images.githubusercontent.com/156377/26895690-5d59bf2e-4b90-11e7-88f5-789bec121541.png

That's different from the pdfs in injector/eagle and injector/eagle_991_mounted - probably doesn't make much difference - just curious about the discrepancy.

— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub https://github.com/zapta/linbus/issues/22, or mute the thread https://github.com/notifications/unsubscribe-auth/ACFWQYa-U1_4S2s-l0JDK8L_yrktkZsTks5sBvDlgaJpZM4NzIU3 .

amet commented 7 years ago

Mounted has a hole for a screw and can be mounted onto a central console

zapta commented 7 years ago

I also had success mounting PCBs with this double side tape. Sometimes directly (e.g. within a 3D printed case) and sometimes after wrapping them with a wide shrink tube similar to RC's ESCs.

https://www.target.com/p/3m-extreme-mounting-tape-1-x60/-/A-14413487?ref=tgt_adv_XS000000&AFID=google_pla_df&CPNG=PLA_Home+Improvement+Shopping&adgroup=SC_Home+Improvement&LID=700000001170770pgs&network=g&device=c&location=9032142&gclid=CJG47KzrrtQCFQeTfgodZBIEmg&gclsrc=aw.ds

On Thu, Jun 8, 2017 at 10:33 AM, Zeljko Ametovic notifications@github.com wrote:

Mounted has a hole for a screw and can be mounted onto a central console

[image: http://i.imgur.com/qKTHAyh.jpg]

— You are receiving this because you commented. Reply to this email directly, view it on GitHub https://github.com/zapta/linbus/issues/22#issuecomment-307173559, or mute the thread https://github.com/notifications/unsubscribe-auth/ACFWQWYjBgoQKmg0Zl4jUhWFLjtLL-Nwks5sCDBpgaJpZM4NzIU3 .