Open GoogleCodeExporter opened 8 years ago
Which transmission package did you install?
The "Transmission dir not mounted" message is normal if you rename a disk. If
you could get to the transmission settings, you would be able to choose a
different directory there.
Did you restart after installing transmission? A common problem is that the
config wasn't saved before restarting. Could you check if services->opkg still
points to "nas_hdd"?
Original comment by stefansc...@googlemail.com
on 24 Jan 2012 at 12:12
I tried to install different transmission, but mostly often try to install
transmission that comes with firmware - v.2.33. Yes, after installing new
firmware I go to disks and add new mount label, cause default one is empty. Set
'nas_hdd'. Then in opkg choose nas_hdd and enable it. Try to save config. It`s
work good, after reboot opkg is still enabled and mount to 'nas_hdd', i tried
to reinstall transmission without reboot and with reboot, it doesn`t helped -
still give me a message 'Transmission dir not mounted. Mount it or change your
config.' right after install of package.
Original comment by sphinks...@gmail.com
on 29 Jan 2012 at 10:44
So what should I do, to get in transmission setting? Cause I didn`t get
transmission in menu.
Original comment by sphinks...@gmail.com
on 29 Jan 2012 at 10:45
I tried to reproduce your steps, the menu entries are showing up fine here.
Maybe a silly question, did you ever refresh the browser window after
installing transmission?
What filesystem do you have on the the disk?
If we really can't figure this out you could try to install
"snakeos-V1.3.2-20101130". Transmission is still integrated into the image
there.
Original comment by stefansc...@googlemail.com
on 30 Jan 2012 at 1:34
After some changes of firmware, V1.3.2 (20111019) at last starts to work. But
transmission didn`t appear after reboot of nas. I need to wait about 5 minutes
and it appear in main menu and in packages. But transmission works strange. It
can don`t download anything for a long time, when transmission download
something and I click temporary reduce speed to 50kb/s, transmission stops to
download at all, speed become 0kb/s inboud and outbound. And beside all, there
is a problem that external usb disk didn`t know by nas after 5-7 hours after
start download, helps only reboot of nas...
Old firmware didn`t bring such number of problems.
Original comment by sphinks...@gmail.com
on 2 Mar 2012 at 4:12
The only explanation I can think of is that detecting the disk takes a very
long time in your case.
Original comment by stefansc...@googlemail.com
on 3 Mar 2012 at 1:14
I've got the same problem.
Solution: connected to NAS via telnet, opened file /etc/default/config with vi
editor, found line "transmission_dir=/usb/sda1/torrents" and changed manually
"sda1" to my hdd's mountpoint name. After reboot transmission started.
Original comment by Bogats...@gmail.com
on 28 Nov 2012 at 3:50
Original issue reported on code.google.com by
sphinks...@gmail.com
on 24 Jan 2012 at 7:16