search

zebulon2 / rtl8812au

RTL8812AU/21AU Driver for Linux
82 stars 23 forks source link

Unstable connection #16

Open Quarx2k opened 6 years ago

Quarx2k commented 6 years ago

Hello. I have a problem with 5ghz and 433mbit. This config allow me to get real speed near 200mbit. But after sometime at this speed, device stop respond. Error "hostapd[459]: Failed to set beacon .parameters"
If not exceed more than 100-150 mbit, device works stable. I think problem in my config, but can't find cause, yet. Maybe someone know what can be wrong. Kernel: 4.17.12-arch1-1-ARCH

hostapd.conf:

ssid=AcessPoint interface=wlp0s20u1 driver=nl80211

hw_mode=a ieee80211n=1 require_ht=1 ieee80211ac=1 require_vht=1 channel=36 vht_oper_chwidth=1 vht_oper_centr_freq_seg0_idx=42 ht_capab=[HT40+][SHORT-GI-20][SHORT-GI-40] vht_capab=[SHORT-GI-40]

wpa=3 wpa_passphrase=..... wpa_key_mgmt=WPA-PSK wpa_pairwise=TKIP CCMP rsn_pairwise=CCMP bridge=br0

logger_syslog=-1 logger_syslog_level=0 logger_stdout=-1 logger_stdout_level=0

JackGrinningCat commented 5 years ago

I do not but i was fear such things when I reach the limits of my beagle bone internal usb 2.0 limitation.