search

zelogik / RicinoNext

A Robitronic compatible Lap Counter.
GNU General Public License v3.0
15 stars 6 forks source link

Infrared transmitter not responding #40

Open my187119 opened 3 months ago

my187119 commented 3 months ago

I followed your schematic and successfully programmed the board. I used my original master control test (Robitronic), but there was no response. I used a logic analyzer to analyze the waveform (as shown in the figure). What is the reason? 13d8394fc1d2aee51fdab66be5fef43 1d435d91eb817cb37ab8e7ebc96bc97 12bd4d6099b4f6add079b7bf49f8604 7a2ba2b296e3f69f73a9f4919303273

zelogik commented 2 months ago

Hi,

I try to understand your problem, as I see receiver board (with USB) AND two emitter (real robitronic/cheap clone/modified PCB from this repo/?), is the problem is the emitter or receiver ? ( confirm that it's the receiver..., even if you show code for emitter...)

What I see is that the receiver board blink when there is a emitter in front (pic2). Please describe a little more your problem please :D

Edit: On the last screenshot, seem like signals was received ... Thanks

my187119 commented 2 months ago

This time I redesigned the PCB according to your schematic, but it still doesn't respond. Can you take a complete usage video on YouTube, or send it to my gmail: my1871192876@gmail.com, thank you 20240905003405 20240905003356

zelogik commented 2 months ago

How to send a video, If i don't exactly know your problem?!?

Could you please describe precisely your problem, what you have done etc...? But what i see is that you completely redesign PCB (emitter and receiver), so error could be here, and you don't push, release your PCB design... I don't know if you have flashed both uC, don't know if you want use with Master or USB after etc...

my187119 commented 2 months ago

Could you provide me your contact information? Communication here is too slow.