zenmanenergy TeslaTurbine issues - Githubissues

zenmanenergy / TeslaTurbine

This is a repository of CAD drawings, pictures and information about the Tesla turbine and pump.

http://www.zenmanenergy.org

Creative Commons Zero v1.0 Universal

6 stars 2 forks source link

issues

Newest

Newest Most commented Recently updated Oldest Least commented Least recently updated

Increase Diameter of exhaust hole

#19 zenmanenergy opened 4 years ago
2
overlap exhaust plate top

#18 zenmanenergy opened 4 years ago
2
Bearing alignment

#17 zenmanenergy opened 4 years ago
1
bearing pipe too big

#16 zenmanenergy opened 4 years ago
2
Tube End plate diameter too big

#15 zenmanenergy opened 4 years ago
2
Housing dimensions too small

#14 zenmanenergy opened 4 years ago
2
Use bolts when welding

#13 zenmanenergy opened 4 years ago
0
Too tight!

#12 zenmanenergy opened 4 years ago
0
bolt holes in housing 1 too small

#11 zenmanenergy opened 4 years ago
0
Swap 1-1/2" pipe for 1-1/4"

#10 zenmanenergy closed 4 years ago
0
Fusion 360

#9 zenmanenergy opened 4 years ago
0
Swap 1/2" for two- 1/4" housing5

#8 zenmanenergy closed 4 years ago
0
Bolt for housing1 and housing exhaust

#7 zenmanenergy closed 4 years ago
0
Housing 1 & Housing exhaust are a pain

#6 zenmanenergy closed 4 years ago
0
Axle without a lathe

#5 zenmanenergy opened 4 years ago
0
exhaust mount 2 doesn't fit

#4 zenmanenergy closed 4 years ago
1
Input mount 2 doesn't fit

#3 zenmanenergy closed 4 years ago
1
Weld the square stock onto the axle

#2 zenmanenergy opened 4 years ago
1
Remove the curves

#1 zenmanenergy closed 4 years ago
0