Closed bisra2 closed 3 years ago
the firmware is loaded in the esp-12 Display on the terminal: Connected but no sending from the terminal:
connected with Livebox-0B8F, channel 1 dhcp client start ... ip: 192.168.0.19, mask: 255.255.255.0, gw: 192.168.0.1 ..... (stack)
But then: no responses when I send commands
OKAY. It's good with the Arduino terminal with "New line" parameter.
the firmware is loaded in the esp-12 Display on the terminal: Connected but no sending from the terminal:
connected with Livebox-0B8F, channel 1 dhcp client start ... ip: 192.168.0.19, mask: 255.255.255.0, gw: 192.168.0.1 ..... (stack)
But then: no responses when I send commands