Windows 10 resolution stuck at 800x600

Hello, Here is my xml file below, host machine is ubuntu 22. In windows 10 I can not change resolution to anything. I tried to add SPICE display but it says qemu doesnt support spice, most likely I have to add a flag during compile to add spice support. My question is if i compile using spice support and spice display, will it break undetection tweaks, or what else can i do to increase resolution.


<domain xmlns:qemu="http://libvirt.org/schemas/domain/qemu/1.0" type="kvm">
  <name>ko1</name>
  <uuid>0acd418c-88a6-453f-b93d-e0cd865ccdf3</uuid>
  <metadata>
    <libosinfo:libosinfo xmlns:libosinfo="http://libosinfo.org/xmlns/libvirt/domain/1.0">
      <libosinfo:os id="http://microsoft.com/win/10"/>
    </libosinfo:libosinfo>
  </metadata>
  <memory unit="KiB">4194304</memory>
  <currentMemory unit="KiB">4194304</currentMemory>
  <memoryBacking>
    <source type="memfd"/>
    <access mode="shared"/>
  </memoryBacking>
  <vcpu placement="static">2</vcpu>
  <os firmware="efi">
    <type arch="x86_64" machine="pc-q35-7.0">hvm</type>
    <loader/>
    <smbios mode="host"/>
  </os>
  <features>
    <acpi/>
    <apic/>
    <hyperv mode="custom">
      <relaxed state="on"/>
      <vapic state="on"/>
      <spinlocks state="on" retries="8191"/>
      <vendor_id state="on" value="GenuineIntel"/>
    </hyperv>
    <kvm>
      <hidden state="on"/>
    </kvm>
    <vmport state="off"/>
    <smm state="on"/>
    <ioapic driver="kvm"/>
  </features>
  <cpu mode="host-passthrough" check="none" migratable="on">
    <feature policy="disable" name="hypervisor"/>
  </cpu>
  <clock offset="localtime">
    <timer name="rtc" tickpolicy="catchup"/>
    <timer name="pit" tickpolicy="delay"/>
    <timer name="hpet" present="no"/>
    <timer name="hypervclock" present="yes"/>
  </clock>
  <on_poweroff>destroy</on_poweroff>
  <on_reboot>restart</on_reboot>
  <on_crash>destroy</on_crash>
  <pm>
    <suspend-to-mem enabled="no"/>
    <suspend-to-disk enabled="no"/>
  </pm>
  <devices>
    <disk type="file" device="disk">
      <driver name="qemu" type="qcow2"/>
      <source file="/home/virinom/Desktop/ko1.img"/>
      <target dev="sda" bus="sata"/> <!-- Match IDE bus type from script -->
    </disk>

    <!-- CD-ROM for Windows 10 ISO -->
    <disk type="file" device="cdrom">
      <driver name="qemu" type="raw"/>
      <source file="/home/virinom/Desktop/win10.iso"/>
      <target dev="sdb" bus="sata"/>
      <readonly/>
    </disk>

    <!-- Ethernet network interface using TAP device -->
    <interface type="bridge">
      <mac address="52:55:00:d1:55:01"/>
      <source bridge="br0"/>
      <model type="e1000"/>
    </interface>

    <serial type='pty'>
  <target port='0'/>
</serial>
<console type='pty' tty='/dev/pts/0'>
  <target type='serial' port='0'/>
</console>

    <graphics type="vnc" port="-1" autoport="yes" listen="0.0.0.0"/>    
  </devices>  
  <qemu:commandline>
    <qemu:arg value="-smbios"/>
    <qemu:arg value="type=0,version=UX305UA.201"/>
    <qemu:arg value="-smbios"/>
    <qemu:arg value="type=1,manufacturer=ASUS,product=UX305UA,version=2021.1"/>
    <qemu:arg value="-smbios"/>
    <qemu:arg value="type=2,manufacturer=Intel,version=2021.5,product=Intel i9-12900K"/>
    <qemu:arg value="-smbios"/>
    <qemu:arg value="type=3,manufacturer=XBZJ"/>
    <qemu:arg value="-smbios"/>
    <qemu:arg value="type=17,manufacturer=KINGSTON,loc_pfx=DDR5,speed=4800,serial=000000,part=0000"/>
    <qemu:arg value="-smbios"/>
    <qemu:arg value="type=4,manufacturer=Intel,max-speed=4800,current-speed=4800"/>
    <qemu:arg value="-cpu"/>
    <qemu:arg value="host,family=6,model=158,stepping=2,model_id=Intel(R) Core(TM) i9-12900K CPU @ 2.60GHz,vmware-cpuid-freq=false,enforce=false,host-phys-bits=true,hypervisor=off"/>
    <qemu:arg value="-machine"/>
    <qemu:arg value="q35,kernel_irqchip=on"/>
  </qemu:commandline>
</domain>
.```

zhaodice / qemu-anti-detection

Windows 10 resolution stuck at 800x600 #92