reboot issue under heavy load

[GoogleCodeExporter]

What steps will reproduce the problem?
1. flash latest rtn firmware on wl500gP v1
2. try to grab big file from the internet or local network
3. expect a reboot

What is the expected output? What do you see instead?
should be working stable

What version of the product are you using?
r4525

Please provide any additional information below.

details are here: 
http://wl500g.info/showthread.php?30258-%CF%F0%EE%E1%EB%E5%EC%E0-%ED%E0-%F0%EE%F
3%F2%E5%F0%E5-WL-500gP-W-(MIPS-R1)-%F1-%EF%F0%EE%F8%E8%E2%EA%EE%E9-rtn-(2-6)&p=2
53348#post253348

Original issue reported on code.google.com by spameden on 9 Aug 2012 at 6:01

[GoogleCodeExporter]

NOTE: reboot is not always happening at the same time. 
to reproduce: it's better to test few times.

most likely bug resides inside open source driver for broadcom ethernet

Original comment by spameden on 9 Aug 2012 at 6:04

[GoogleCodeExporter]

[deleted comment]

[GoogleCodeExporter]

This may not be a software problem. These routers are known to have issues with 
bad capacitors in the power supply wall wart and the router itself. For 
example, see: http://www.dd-wrt.com/phpBB2/viewtopic.php?t=56939

My WL-500W used to be perfectly stable when copying multiple gigabytes from a 
fast file server on wired Ethernet to wireless or from Samba on the router 
itself to wireless. Recently, the router was stable enough for web browsing, 
but even downloading software from the net was enough to cause a reboot. I 
thought I was running into this bug, but then I downgraded to r2624 which was 
stable before and it was also unstable. After opening the router I saw an 
obviously bad capacitor right by the toroidal inductor near the power input. 
(To open, remove the rubber feet, unscrew the 4 screws hidden by rubber feet, 
and remove the top.)

Original comment by boris.gj...@gmail.com on 1 Oct 2012 at 5:09

[GoogleCodeExporter]

>This may not be a software problem. These routers are known to have issues 
with bad >capacitors in the power supply wall wart and the router itself. For 
example, see: >http://www.dd-wrt.com/phpBB2/viewtopic.php?t=56939

No, it's not related to hardware at all.

I have r3323 right now. It's pretty stable, no reboots at all under heavy load, 
the only problem is internet disconnects sometimes if there is a heavy load, 
like there is no enough network bandwidth to keep connection alive.

>My WL-500W used to be perfectly stable when copying multiple gigabytes from a 
fast >file server on wired Ethernet to wireless or from Samba on the router 
itself to >wireless. Recently, the router was stable enough for web browsing, 
but even >downloading software from the net was enough to cause a reboot. I 
thought I was >running into this bug, but then I downgraded to r2624 which was 
stable before and >it was also unstable. After opening the router I saw an 
obviously bad capacitor >right by the toroidal inductor near the power input. 
(To open, remove the rubber >feet, unscrew the 4 screws hidden by rubber feet, 
and remove the top.)

Hm, interesting, after replacing capacitors inside the router has it fixed the 
bug?
I don't think in my case it's capacitors - when AC dead router obviously wasn't 
working at all, so I replaced capacitors in the AC.

If I do copy a lot over Samba / LAN-WIFI this issue is not happening, so most 
likely it's not a hardware issue. It only happens if you do massive download 
from the WAN.

Original comment by spameden on 1 Oct 2012 at 5:36

[GoogleCodeExporter]

[deleted comment]

[GoogleCodeExporter]

$ uptime
 09:40:14 up 17 days, 12:07, load average: 0.24, 0.30, 0.20

P.S. I'm gonna try r2624 and report back shortly..

Original comment by spameden on 1 Oct 2012 at 5:41

[GoogleCodeExporter]

The AC adapter was bad too: it couldn't maintain a reasonable voltage under 
load, and the 1200µF 10V output filtering cap was bulging. After replacing 
that and the 1000µF 6.3V cap in the router that filters 3.3V power, my WL-500W 
appears stable. 

I'm just using as it as a switch, wireless AP and occasionally internal router, 
and not as my Internet gateway. If you only have instability during heavy 
Internet connection load, that seems more like a software issue.

Original comment by boris.gj...@gmail.com on 1 Oct 2012 at 5:34

[GoogleCodeExporter]

Well, in my case it's definitely not AC adapter or internal capacitors inside 
router, it's firmware itself bugging.

I never had such issues on 2.4.20 Oleg's original firmware - it was stable as 
f**k.

I have to use this new -rtn firmware due 802.11n card BCM43222 inside my router.

Original comment by spameden on 1 Oct 2012 at 5:41

[GoogleCodeExporter]

No useful info in issue

Original comment by lly.dev on 16 Feb 2013 at 10:55

• Changed state: Invalid

[GoogleCodeExporter]

I don't care anymore, because I got rid of my WL-500gP v1, so you can close 
this issue if you want.

Original comment by spameden on 16 Feb 2013 at 11:19