search

zhuravskiy / wl500g

Automatically exported from code.google.com/p/wl500g
0 stars 0 forks source link

PortForwarding/Virtual Server not working on RT-N10U #360

Closed GoogleCodeExporter closed 8 years ago

GoogleCodeExporter commented 8 years ago 
Hi

I'm using the latest: RT-N10U-1.9.2.7-rtn-r4667.trx

I created a simple port forwarding rule, to forward all traffic on port WAN's 
80 to local 192.168.1.69:80 <-- my webserver.. 

here's a screenshot 
http://d.pr/i/yCSH 

But this doesnt seem to work, all i get is TIME OUT.

I have verified that all the other variables in this problem (web server 
running, port forwarding, firewall, etc) are OK, and this is definitely the 
firmware's issue... infact, if i quickly switch to another router I have lying 
around w/ the same Virtual Server settings, everything works..

What's up w/ this?

Regards

TJ

Original issue reported on code.google.com by cleve...@gmail.com on 10 Oct 2012 at 4:52

GoogleCodeExporter commented 8 years ago 
You are done something wrong. You have to get more knowledge in iptables. Try 
to read wl500g.info forum & similar resources.

Original comment by lly.dev on 10 Oct 2012 at 6:24

GoogleCodeExporter commented 8 years ago 
probably your web server either blocks incoming packets from wan ip addresses, 
or have no route to send replies back to them via same router gateway.

Original comment by themiron.ru on 10 Oct 2012 at 8:29

GoogleCodeExporter commented 8 years ago 

I don't have any knowledge in the Iptables, but I have setup NUMEROUS routers 
and more complex PORT FORWARDING for many years already, and I don't know why 
this one should be any different. It's just a simple PORT FORWARDING that I'm 
doing.

Also, keeping everything THE SAME, and changing routers only, everything works, 
and it's only when I use this router in question that I'm having problems with..

Lastly, i had DD-WRT installed on this router before jumping to WL500G.. I also 
had this same problem w/ DDWRT Firmware and it involved a lot of fidling w/ the 
router, and adding FIREWALL COMMAND lines etc, just to get this PORT FORWARDING 
to work.. that's the reason why I switched to this firmware... unfortunately it 
still has issues :(

Bottom line, THERE ARE NO PROBLEMS with my SETUP, webserver, and all.. I CAN 
REPEATEDLY TEST THIS and PROVE this using a totally different router w/ 
standard firmware. Infact i USE a totally different Router (TPLINK 740N) on a 
regular basis when i'm not testing / playing around w/ custom firmware routers 
such as this, and everything works fine.

Original comment by cleve...@gmail.com on 10 Oct 2012 at 8:36

GoogleCodeExporter commented 8 years ago 
Sorry, we unable to provide personal support.

Original comment by lly.dev on 10 Oct 2012 at 5:37

GoogleCodeExporter commented 8 years ago 
it's ok.. i was just hoping this would pop out a known issue or something.. but 
it seems i'm the only one experiencing this(?).. strange indeed.

im gona go over everything.... but i doubt it will yield a different result...

Original comment by cleve...@gmail.com on 11 Oct 2012 at 4:20