Closed GoogleCodeExporter closed 8 years ago
please provide details, it's unclear what did you mean.
Original comment by themiron.ru
on 15 Oct 2012 at 3:44
What can i do?
Original comment by mrDoctorWho
on 15 Oct 2012 at 3:55
There are correct detection (1) and incorrect (2).
Original comment by mrDoctorWho
on 15 Oct 2012 at 4:04
Attachments:
First of all, you must provide exact firmware version & syslog.log.
WL500gP V2 has not such strong transmitter as PC, so it might be bad Ethernet
cable to ISP. There was many reports with similar problem. Easy can be check by
any good external hub plugged in before router.
Original comment by lly.dev
on 15 Oct 2012 at 6:19
[deleted comment]
Firmware ver: 1.9.2.7-rtn-r4667. Maybe also it have many info for you:
(From PC that connected to router)
$ ping ya.ru
64 bytes from www.yandex.ru (93.158.134.203): icmp_req=36 ttl=49 time=73.1 ms
# all was is ok. Then address automatically switched to incorrect
From WL-E0CB4E89CF5C (192.168.1.1) icmp_seq=97 Destination Net Unreachable
From 169.254.9.82 icmp_seq=114 Destination Host Unreachable
I ask my provider for it. Of course, provider said "This is not our problem.
Ask router/firmware developer".
Original comment by mrDoctorWho
on 16 Oct 2012 at 9:18
Attachments:
Your ISP simply don't want to support router, it is your zone of
responsibility.
I see following line in syslog before problem:
wan: disconnected manually (unit 0)
for which reason it was done? Are you understand what you are doing?
Probably your ISP has some "guard" interval for DHCP requests. If you repeat
exactly the same action on your PC, you will give the same result.
P.S. Try to read wl500g.info forum, it contain many useful info on ASUS routers
Original comment by lly.dev
on 16 Oct 2012 at 10:31
> wan: disconnected manually (unit 0)
Cable was not unplugged. I tried to reconnect router to wan in web-interface
when it got incorrect IP. It's helpful for some time.
Original comment by mrDoctorWho
on 16 Oct 2012 at 10:35
I can't see any sign of problem before following line:
Oct 16 16:06:39 wan: disconnected manually (unit 0)
You must check IP on vlan1 & ping test before doing any "magic" actions.
"wrong" IP address 169.254.9.82 assigned in case of all attempts to get DHCP
lease was failed. My guess still the same - bad WAN cable.
Original comment by lly.dev
on 16 Oct 2012 at 4:33
Roter still was on it place. If it dont moved and (maybe) cable broken, why it
happens just sometimes? Also if really cable broken, why router get IP? I think
that here should not be any connection.
Original comment by mrDoctorWho
on 16 Oct 2012 at 4:38
dhcp works on timeout basis.
that means once the lease is obtained for some time, before it expires, lease
should be renewed. if at that time, dhcp server isn't accesible, and lease time
has expired, ip address will be defaulted to 169.254.x.x/16 zero-conf one.
Original comment by themiron.ru
on 17 Oct 2012 at 4:45
Ok, thank you.
Original comment by mrDoctorWho
on 17 Oct 2012 at 4:54
broken hardware link
Original comment by lly.dev
on 24 Oct 2012 at 5:15
I think it's a firmware bug. I tried firmware WL500gpv2-1.9.2.7-d-r2624, there
are all is ok! Ip detecting correctly.
Original comment by mrDoctorWho
on 1 May 2013 at 1:49
Original issue reported on code.google.com by
mrDoctorWho
on 15 Oct 2012 at 11:26