search

zhuravskiy / wl500g

Automatically exported from code.google.com/p/wl500g
0 stars 0 forks source link

Lost 3g connection - cannot reconnect #428

Open GoogleCodeExporter opened 9 years ago

GoogleCodeExporter commented 9 years ago 
What steps will reproduce the problem?
1. Install 1.9.2.7-rtn-r5066 and plug in e3276 modem
2. Configure Ethernet over USB with NCM device control
3. Connect
4. When network breaks thet connection the modem goes into disabled mode. 
Status shows that modem is still connected. Reconnection fails (usually the 
issue is in dhcp client configuration. Sometimes it helps to click Disconnect 
and then Connect but not always

What is the expected output? What do you see instead?
It is expected that Oleg's firmware will properly show status (as disconnected) 
and manage dhcp client during 3g connection

What version of the product are you using?
1.9.2.7-rtn-r5066

Please describe the problem as detailed as it's possible.
System log shows
kernel: cdc_ncm: usb0: network connection: disconnected
kernel: wan0: port 1(usb0) entering disabled state
I guess if "disabled state" is not the reason of the problem

Original issue reported on code.google.com by tkocha...@gmail.com on 2 Jan 2014 at 10:43

GoogleCodeExporter commented 9 years ago 
Try to update firmware from nightbuilds http://asus.vectormm.net/rtn/

Original comment by rssdev10@gmail.com on 13 Jan 2014 at 8:51

GoogleCodeExporter commented 9 years ago 
I have tried on 1.9.2.7-rtn-r5337 but issue is the same

Original comment by tkocha...@gmail.com on 21 Jan 2014 at 10:52