Wifi is not working on the WL500g Premium v2

[GoogleCodeExporter]

When I turn on router the wireless led is not illuminated. I have to turn
on WIFI in WebUI, then the led is lit. However, the wireless network is
still not visible (checked on the iPhone and playstation3).

I tried to change wireless settings. It did not help.

Firmware which I use: WL500gpv2-1.9.2.7-d-r1087.trx

Original issue reported on code.google.com by lesiuk@gmail.com on 3 Feb 2010 at 7:42

[GoogleCodeExporter]

You didn't write, was it work before? Was you reset to defaults when you 
upgrading,
was you check Status & Log -> Wireless tab, etc.

If "wl status" command will return reasonable output, problem is in settings. 
There
were many problematic points with WiFi, check wl500g.info forum. Even it may be
broken power supply.

P.S. It works on my wl520gU & on many others 500gpV2

Original comment by lly.dev on 3 Feb 2010 at 7:54

[GoogleCodeExporter]

Yes, it works on original fw.

SSID: "szczepan"
Mode: Ad Hoc RSSI: 0 dBm noise: 0 dBm Channel: 1
BSSID: 00:00:00:00:00:00 Capability: IBSS ShortSlot
Supported Rates: [ 1(b) 2(b) 5.5(b) 6 9 11(b) 12 18 24 36 48 54 ]

Original comment by lesiuk@gmail.com on 3 Feb 2010 at 8:02

[GoogleCodeExporter]

Ok, I will try restore settings.

Original comment by lesiuk@gmail.com on 3 Feb 2010 at 8:05

[GoogleCodeExporter]

So, WiFi card itself is operational. Might be some problem with security due to
updated driver. Try to turn off security, or change encryption methods.

Unfortunately, Broadcom distribute WiFi driver in binary form only, without full
specs, so it is very hard to modify anything.

Original comment by lly.dev on 3 Feb 2010 at 8:08

[GoogleCodeExporter]

Thanks :)

After restoring settings it works.

Original comment by lesiuk@gmail.com on 5 Feb 2010 at 6:35

[GoogleCodeExporter]

NB! Always perform reset to defaults when migration from original ASUS FW.

Original comment by lly.dev on 5 Feb 2010 at 8:15

• Changed state: Invalid