Enclosure of lower height/profile for 4 conn version

[zigastegu]

Nice! I bought one. Do you have any plans for releasing another case with lower height? Thanks. - freebil

[zigastegu]

Candidates according to approx. size filter

60 < width <80 20 < height < 30 legth = 100

http://www.everestcase.com/en/productsd.php?pid=1166 [W71×H24.8×L100 mm] http://www.everestcase.com/en/productsd.php?pid=877 [W69×H24×L100 mm] http://www.everestcase.com/en/productsd.php?pid=802 [W66×H27×L100 mm] http://www.everestcase.com/en/productsd.php?pid=901 [W74×H22×L100 mm]

[zigastegu]

I found datasheet, with most dimension marked, on Taobao (a lot of edited ones). W71xH25xL100 This seems to be closes to original:

https://world.taobao.com/item/523348265980.htm#detail https://img.alicdn.com/imgextra/i1/116848420/TB2VrbAbXXXXXasXpXXXXXXXXXX_!!116848420.jpg

[zigastegu]

Sample of Rear_panel_71x25 in production with some other boards

[zigastegu]

shipped from Fab

[zigastegu]

Received the sample. Unfortunatelly, did not receive enclosure yet

I have too much of this back plates now. :/ :)

[zigastegu]

• bit crammed, where is place for LEDs?
• 4 mount holes need more clearance, so panel can be alligned easier

should i then divide into 2 panels, one for 4 front connectors and one for 10 front connectors? should i pursue whole enclosure kit assembly with cutouts made in aluminum? MOQ 100pcs :/

[zigastegu]

This development was discontinued. 🤔🤦