search

zigbeefordomoticz / Domoticz-Zigbee

Zigbee plugin for Domoticz. Allow to connect various zigbee controllers like Zigate but also Texas Instrument CC2531, CC13x2, CC26x2 ; Silicon-Labs; deConz based chipset to be connected to Domoticz
GNU General Public License v3.0
101 stars 43 forks source link

Compatibility issue with Connected Plug Celiane/Netamo/Legrand #147

Closed pipiche38 closed 6 years ago

pipiche38 commented 6 years ago

The Celian/Netamo/Legrand connected plug can be managed with the plugin , however only the switch on/off is currently working.

It seems that there is one cluster (providing power information) not available . This would require an upgrade of the device firmware which unfortunately can only be done through Netatmo/Legrand gateway :-(

Smanar commented 6 years ago

Someone have the procedure to "reset" devices, to launch a second time the pairing phase ? I have the prb with a switch, but I think it's same for the plug.

pipiche38 commented 6 years ago

@Smanar here is the Legrand documentation. There is a reset button . Check "fonctionnement'

http://docdif.fr.grpleg.com/general/MEDIAGRP/NP-FT-GT/F02486FR-00.pdf

You can also look after that one http://docdif.fr.grpleg.com/general/MEDIAGRP/NP-FT-GT/F02483FR-00.pdf

Smanar commented 6 years ago

Mistake. It's the old model (not compatible with zigate), Legrand have stopped this model, now all device have "with netamo" inside their names and are compatible. http://docdif.fr.grpleg.com/general/MEDIAGRP/NP-FT-GT/LE10635AA.pdf http://docdif.fr.grpleg.com/general/MEDIAGRP/NP-FT-GT/LE10383AB.pdf

I know only 1 device with the reset button, the "micromodule"

Smanar commented 6 years ago

I have broked my switch, but I have find. Front side, rly hard to access.