Closed olive6707 closed 1 year ago
Erratum, bellow right infomation {"Version":"3","ZDeviceName":"","Status":"inDB","SQN":"2a","Ep":{"01":{"0000":{"0004":"_TZ3000_0zrccfgx","0005":"TS0215A","0000":"3","0001":"68","0002":"0","0003":"1","0006":"","0007":"3"},"0001":{"0000":0,"0020":30,"0021":200},"0003":{},"0501":{},"0019":{"0001":"ffffffff","0002":"00000044","0003":"0002","0004":"ffffffff","0005":"ffff","0006":"00","0007":"1141","0008":"ffff","0009":"0000"},"000a":{},"ClusterType":{"275":"Voltage","276":"Door"},"0500":{"0000":"01","0001":"010f","0002":"alarm1: 0, alarm2: 0, tamper: 0, batter: 0, srepor: 0, rrepor: 0, troubl: 0, acmain: 0, test: 0, batdef: 0, doorbell: 0","0010":"8cf681fffec7d318"}}},"Heartbeat":"302","RIA":"4","LQI":176,"Battery":200,"Model":"TS0215A","ForceAckCommands":[],"MacCapa":"80","IEEE":"a4c138a296abbb20","Type":"Voltage/Door","ProfileID":"0104","ZDeviceID":"0401","App Version":"68","Attributes List":{},"DeviceType":"RFD","HW Version":"1","Last Cmds":[],"LogicalType":"End Device","Manufacturer":1002,"Manufacturer Name":"_TZ3000_0zrccfgx","NbEp":"1","PowerSource":"Battery","ReadAttributes":{"Ep":{"01":{"0001":{"TimeStamp":1680785383,"iSQN":{"0000":"17","0001":"17","0003":"17","0020":"18","0021":"18","0033":"18","0035":"19"},"Attributes":{"0000":"00","0001":"86","0020":"00","0021":"00","0033":"86","0035":"86"},"ZigateRequest":{}},"0019":{"TimeStamp":1680785387,"iSQN":{"0001":"1a","0002":"1a","0003":"1a","0004":"1b","0005":"1b","0006":"1b","0007":"1c","0008":"1c","0009":"1c","000a":"1d"},"Attributes":{"0001":"00","0002":"00","0003":"00","0004":"00","0005":"00","0006":"00","0007":"00","0008":"00","0009":"00","000a":"86"},"ZigateRequest":{}},"0000":{"TimeStamp":1680785392,"iSQN":{"4000":"22","0004":"1e","0005":"1e","0000":"1e","0001":"1f","0002":"1f","0003":"1f","0006":"20","0007":"20","000a":"20","000f":"21","0010":"21","0015":"21","f000":"22"},"Attributes":{"4000":"86","0004":"00","0005":"00","0000":"00","0001":"00","0002":"00","0003":"00","0006":"00","0007":"00","000a":"86","000f":"86","0010":"86"},"ZigateRequest":{}},"0500":{"TimeStamp":1680785408,"iSQN":{},"Attributes":{"0000":"00","0001":"00","0002":"00","0010":"00"},"ZigateRequest":{}}}}},"ReceiveOnIdle":"Off","Stack Version":"0","Stamp":{"time":1680785408.6205704,"Time":"2023-04-06 14:50:08","MsgType":"8011","LastSeen":1680785408},"ZCL Version":"3","Health":"","ConfigSource":"8043","BatteryUpdateTime":1680785382,"IAS":{"Auto-Enrollment":{"Status":"Enrolled","Ep":{"01":{"Status":"Enrolled","TimeStamp":1680785373.75823,"ZoneId":"00"}}},"01":{"EnrolledStatus":1,"ZoneType":271,"ZoneTypeName":"remote_control","ZoneStatus":{"alarm1":0,"alarm2":0,"tamper":0,"battery":0,"Support Reporting":0,"Restore Reporting":0,"trouble":0,"acmain":0,"test":0,"battdef":0,"doorbell":0,"GlobalInfos":"0;0;0;0;0;0;0;0;0;0;0","TimeStamp":1680785406}}},"CertifiedDevice":false,"Epv2":{"01":{"ClusterIn":{"0001":{},"0003":{},"0500":{},"0000":{}},"ClusterOut":{"0501":{},"0019":{},"000a":{}},"ProfileID":"0104","ZDeviceID":"0401"}},"Bind":{"01":{"0001":{"Target":"0000","Stamp":1680785375,"Phase":"binded","Status":"00","i_sqn":"0c"},"0003":{"Target":"0000","Stamp":1680785376,"Phase":"binded","Status":"00","i_sqn":"0d"},"0000":{"Target":"0000","Stamp":1680785377,"Phase":"binded","Status":"00","i_sqn":"0e"},"0500":{"Target":"0000","Stamp":1680785407,"Phase":"binded","Status":"00","i_sqn":"13"}}},"ConfigureReporting":{"Ep":{"01":{"0500":{"TimeStamp":1680785373.7760398,"iSQN":{"0000":"15","0001":"15","0002":"15"},"Attributes":{"0000":"00","0001":"00","0002":"00","100e":"86"},"ZigateRequest":{}},"0001":{"TimeStamp":1680785373.7791643,"iSQN":{"0000":"16","0020":"16","0021":"16"},"Attributes":{"0000":"00","0020":"8d","0021":"8d"},"ZigateRequest":{}}}}},"SWBUILD_1":"","BindingTable":{"SQN":0,"Status":"Success","TimeStamp":1680785396.8399873,"BindingTableSize":4,"Devices":[{"a4c138a296abbb20":{"sourceEp":"01","Cluster":"0001","targetIEEE":"8cf681fffec7d318","targetNickName":"Zigbee Coordinator","targetEp":"01"}},{"a4c138a296abbb20":{"sourceEp":"01","Cluster":"0003","targetIEEE":"8cf681fffec7d318","targetNickName":"Zigbee Coordinator","targetEp":"01"}},{"a4c138a296abbb20":{"sourceEp":"01","Cluster":"0000","targetIEEE":"8cf681fffec7d318","targetNickName":"Zigbee Coordinator","targetEp":"01"}},{"a4c138a296abbb20":{"sourceEp":"01","Cluster":"0500","targetIEEE":"8cf681fffec7d318","targetNickName":"Zigbee Coordinator","targetEp":"01"}}]},"ReadConfigureReporting":{"Ep":{"01":{"0500":{"0000":{"TimeStamp":1680785401.4120767,"Status":"00","DataType":"30","MinInterval":"003c","MaxInterval":"0384"},"0001":{"TimeStamp":1680785401.4125264,"Status":"00","DataType":"31","MinInterval":"003c","MaxInterval":"0384"},"0002":{"TimeStamp":1680785401.4129677,"Status":"00","DataType":"19","MinInterval":"003c","MaxInterval":"0384"}},"0001":{"0000":{"TimeStamp":1680785402.4805148,"Status":"00","DataType":"21","MinInterval":"012c","MaxInterval":"fffe","Change":"0001"},"0020":{"TimeStamp":1680785402.4807293,"Status":"8b"},"0021":{"TimeStamp":1680785402.4809353,"Status":"8b"}}}},"TimeStamp":1680785402.4809275},"WriteAttributes":{"Ep":{"01":{"0500":{"TimeStamp":0,"iSQN":{},"Attributes":{},"ZigateRequest":{}},"0000":{"TimeStamp":0,"iSQN":{},"Attributes":{},"ZigateRequest":{}},"0001":{"TimeStamp":0,"iSQN":{},"Attributes":{},"ZigateRequest":{}},"0003":{"TimeStamp":0,"iSQN":{},"Attributes":{},"ZigateRequest":{}},"0501":{"TimeStamp":0,"iSQN":{},"Attributes":{},"ZigateRequest":{}},"0019":{"TimeStamp":0,"iSQN":{},"Attributes":{},"ZigateRequest":{}},"000a":{"TimeStamp":0,"iSQN":{},"Attributes":{},"ZigateRequest":{}}}}},"Capability":["Reduced-Function Device","Standard security","NwkAddr should be allocated"],"IASBattery":100,"ConsistencyCheck":"ok","Log_UnknowDeviceFlag":1680785574.1623049}
is the device working correctly ?
Hi pipiche
No it doesn't work. 2 devices created in domoticz, but no selector. See enclosed id= a4c138a296abbb20 One Switch and one voltage. No effect with thé remote control Thanks for your help
Le sam. 8 avr. 2023, 10:30, Pipiche @.***> a écrit :
is the device working correctly ?
— Reply to this email directly, view it on GitHub https://github.com/zigbeefordomoticz/Domoticz-Zigbee/issues/1575#issuecomment-1500825349, or unsubscribe https://github.com/notifications/unsubscribe-auth/ATYWQQWABHNVYQCL6LMUHVDXAEO27ANCNFSM6AAAAAAWVMVGNA . You are receiving this because you authored the thread.Message ID: @.***>
please switch to 'develop' branch
git checkout develop
git pull
sudo python3 -m pip install -r requirements.txt --upgrade
then you need to remove the 2 widgets, make sure that the device has been remove from the plugin
then restart the plugin
and do the pairing
Ok I am now absent for the easter WE. I will do it next week and take you informe Rgds
Le sam. 8 avr. 2023, 15:21, Pipiche @.***> a écrit :
please switch to 'develop' branch
git checkout develop git pull sudo python3 -m pip install -r requirements.txt --upgrade
then you need to remove the 2 widgets, make sure that the device has been remove from the plugin
then restart the plugin
and do the pairing
— Reply to this email directly, view it on GitHub https://github.com/zigbeefordomoticz/Domoticz-Zigbee/issues/1575#issuecomment-1500890812, or unsubscribe https://github.com/notifications/unsubscribe-auth/ATYWQQVRVNVP444YDDQ5D6TXAFQ4TANCNFSM6AAAAAAWVMVGNA . You are receiving this because you authored the thread.Message ID: @.***>
Hello pipiche38
I followed your instructions Now plugin stays in a pairing mode despite the remote control seams to be paired. No new object created and so no devices
please provides logs ? ( Domoticz logs and plugin logs )
don t know where to find domoticz log file
Plugin logs are available under the Logs/ folder For domoticz it depends how you have configure it
here the log for the plugin with a new pairing at 21:40 devices are created thanks to authorized new devices in domoyicz setup
maybe it can help : https://www.zigbee2mqtt.io/devices/TS0215A_remote.html#tuya-ts0215a_remote
please follow https://github.com/zigbeefordomoticz/Domoticz-Zigbee/issues/1575#issuecomment-1500890812 the logs you provided shows that you are on the plugin version 6.3.008 ;, which is an out-dated version of stable6 and you need to be on the develop branch
Afer redo it I check the branch and I am always under stable 6 release here bellow error message after git checkout command
sudo git checkout develop error: Your local changes to the following files would be overwritten by checkout: .github/FUNDING.yml .github/stale.yml .github/workflows/codeql-analysis.yml .github/workflows/jsoncheck.yml .github/workflows/lint_python.yml .gitmodules .hidden/VERSION Classes/DomoticzDB.py Classes/GroupMgtv2/GrpDomoticz.py Classes/GroupMgtv2/GrpResponses.py Classes/IAS.py Classes/LoggingManagement.py Classes/NetworkEnergy.py Classes/NetworkMap.py Classes/OTA.py Classes/PluginConf.py Classes/WebServer/WebServer.py Classes/WebServer/dispatcher.py Classes/WebServer/onMessage.py Classes/WebServer/rest_Casaia.py Classes/WebServer/rest_CfgReporting.py Classes/WebServer/rest_Groups.py Classes/WebServer/rest_Ota.py Classes/WebServer/rest_PluginUpgrade.py Classes/WebServer/rest_Topology.py Classes/WebServer/rest_ZLinky.py Classes/ZigateTransport/Transport.py Classes/ZigateTransport/decode8012.py Classes/ZigateTransport/handleProtocol.py Classes/ZigateTransport/readDecoder.py Classes/ZigateTransport/readwriteTcp.py Classes/ZigateTransport/writerThread.py Classes/ZigpyTransport/AppBellows.py Classes/ZigpyTransport/AppDeconz.py Classes/ZigpyTransport/AppGeneric.py Classes/ZigpyTransport/AppZigate.py Classes/ZigpyTransport/AppZnp.py Classes/ZigpyTransport/Transport.py Classes/ZigpyTransport/instrumentation.py Classes/ZigpyTransport/zigpyThread.py Conf/Certified/00Local/.PRECIOUS Conf/Certified/Adeo/LDSENK10.json Conf/Certified/Bitron/90201021A.json Conf/Certified/Bitron/90201021B.json Conf/Certified/Bitron/90201024.json Conf/Certified/Bitron/AV201021B.json Conf/Certified/Bitron/AV201024A.json Conf/Certified/Bitron/AV201029A.json Conf/Certified/CLEODE/ZHUM.json Conf/Certified/CLEODE/ZMOVE.json Conf/Certified/CLEODE/ZPLUG.json Conf/Certified/Casa.ia/CAC221.json Conf/Certified/Casa.ia/CCB432.json Conf/Certified/Casa.ia/CDWS312.json Conf/Certified/Casa.ia/CKF204.json Conf/Certified/Casa.ia/CKF205.json Conf/Certified/Casa.ia/CMS323.json Conf/Certified/Casa.ia/CPB206.json Conf/Certified/Casa.ia/CPC321.json Conf/Certified/Casa.ia/CPR412-E.json Conf/Certified/Casa.ia/CPR412.json Conf/Certified/Casa.ia/CSAC451-E.json Conf/Certified/Casa.ia/CSAC451-WTC-E.json Conf/Certified/Casa.ia/CSLC601-D-E.json Conf/Certified/Casa.ia/CSLC601-E.json Conf/Certified/Casa.ia/CSLC631-3.json Conf/Certified/Casa.ia/CSP403.json Conf/Certified/Casa.ia/CTHS317ET.json Conf/Certified/Casa.ia/Dual_Relay_Module.json Conf/Certified/Danalock/V3-BTZB.json Conf/Certified/Danfoss/RV001.json Conf/Certified/Danfoss/eT093WRO.json Conf/Certified/Danfoss/eTRV0100.json Conf/Certified/Develco/HESZB120.json Conf/Certified/Develco/HMSZB-110.json Conf/Certified/Develco/MOSZB-140.json Conf/Certified/Develco/SMSZB-120.json Conf/Certified/Develco/SPLZB-131.json Conf/Certified/Develco/SPLZB-132.json Conf/Certified/Develco/ZHEMI101.json Conf/Certified/ENKI-LEXMAN/LXEK-1.json Conf/Certified/ENKI-LEXMAN/LXEK-2.json Conf/Certified/ENKI-LEXMAN/LXEK-7.json Conf/Certified/Eurotronics/SPZB0001.json Conf/Certified/GLEDOPTO/GL-B-007Z.json Conf/Certified/GLEDOPTO/GL-B-008Z.json Conf/Certified/GLEDOPTO/GL-C-007-2ID.json Conf/Certified/GLEDOPTO/GL-C-007.json Conf/Certified/GLEDOPTO/GL-C-008.json Conf/Certified/GLEDOPTO/GL-C-008S.json Conf/Certified/GLEDOPTO/GL-C-008Z.json Conf/Certified/GLEDOPTO/GL-C-009.json Conf/Certified/GLEDOPTO/GL-D-003Z.json Conf/Certified/GLEDOPTO/GL-FL-004TZS.json Conf/Certified/GLEDOPTO/GL-MC-001.json Conf/Certified/GLEDOPTO/GLEDOPTO.json Conf/Certified/Heiman/COSensor-EF-3.0.json Conf/Certified/Heiman/COSensor-EM.json Conf/Certified/Heiman/COSensor-N.json Conf/Certified/Heiman/CO_V15.json Conf/Certified/Heiman/CO_YDLV10.json Conf/Certified/Heiman/GASSensor-EF-3.0.json Conf/Certified/Heiman/GAS_V15.json Conf/Certified/Heiman/RC-EF-3.0.json Conf/Certified/Heiman/RC-EM.json Conf/Certified/Heiman/SMOK_V16.json Conf/Certified/Heiman/SMOK_YDLV10.json Conf/Certified/Heiman/SmokeSensor-EF-3.0.json Conf/Certified/Heiman/SmokeSensor-EM.json Conf/Certified/Heiman/SmokeSensor-N-3.0.json Conf/ Aborting
can you try the following command
Tools/big-clean-git.sh
and then redo
git checkout develop
git pull
sudo python3 -m pip install -r requirements.txt --upgrade
Tools directory doesn't exist
Le mer. 12 avr. 2023, 21:55, Pipiche @.***> a écrit :
can you try the following command
Tools/big-clean-git.sh
and then redo
git checkout develop git pull sudo python3 -m pip install -r requirements.txt --upgrade
— Reply to this email directly, view it on GitHub https://github.com/zigbeefordomoticz/Domoticz-Zigbee/issues/1575#issuecomment-1505840894, or unsubscribe https://github.com/notifications/unsubscribe-auth/ATYWQQU2NUFEI5QUWUVD3Z3XA4CDBANCNFSM6AAAAAAWVMVGNA . You are receiving this because you authored the thread.Message ID: @.***>
If Tools directory doesn't exist you are not on the plugin home folder, or some folders have been removed
ok I installed again the plugin from scratched switch to develop branch. here the log _PluginZigbee_28.log
and domoticz log captured during pairing
This is still 6.3. which is used. Don't you have several vertsion of the plugin under plugins/ folder ?
Zigbee for Domoticz (z4d) plugin stable6-6.3.012 started 2023-04-13 19:54:12,924 INFO : [ MainThread 7164] Plugin Database: DeviceList-28.txt 2023-04-13 19:54:12,932 INFO : [ MainThread 7164] DeviceConf loaded - 17 confs loaded 2023-04-13 19:54:13,658 INFO : [ MainThread 7164] DeviceConf loaded - 439 confs loaded 2023-04-13 19:54:13,659 INFO : [ MainThread 7164] load ListOfDevice 2023-04-13 19:54:13,800 INFO : [ MainThread 7164] 6 Entries loaded from /home/pi/domoticz/plugins/Domoticz-Zigbee/Data/DeviceList-28.txt 2023-04-13 19:54:13,832 INFO : [ MainThread 7164] Transport mode: ZigpyEZSP
very strange: I did again:
2023-04-14 10:45:44.167 Error: Zigbee: (Zigate) failed to load 'plugin.py', Python Path used was '/home/pi/domoticz/plugins/Domoticz-Zigbee/:/usr/lib/python39.zip:/usr/lib/python3.9:/usr/lib/python3.9/lib-dynload:/usr/local/lib/python3.9/dist-packages:/usr/lib/python3/dist-packages:/usr/lib/python3.9/dist-packages'.
2023-04-14 10:45:44.170 Error: Zigbee: Traceback (most recent call last):
2023-04-14 10:45:44.170 Error: Zigbee: File "/home/pi/domoticz/plugins/Domoticz-Zigbee/plugin.py", line 98, in
looks like you are missing a python module you need to run this command from the plugin home folder
sudo python3 -m pip install -r requirements.txt --upgrade
already done but attribute error, and no change on domoticz log
sudo python3 -m pip install pip pyopenssl --upgrade
sudo python3 -m pip install -r requirements.txt --upgrade
no change
no effect, I also tried apt update and apt upgrade
I think I will re install python3, which release is it suitable?
Python3.9 is fine. Do you have a lite-raspbian version ? If that is the case, I think you should install also the following
git-all, python3-dev et python3-pip
no it is Raspbian linux11 (bullseye)
Hi pipiche After numerous trouble (broke my instalation difficulties to come back with a backup.) I finaly resolved my issue with python thanks to google:
udo rm -rf /usr/lib/python3/dist-packages/OpenSSL sudo pip3 install pyopenssl sudo pip3 install pyopenssl --upgrade
now I have some errors in the domoticz log when starting 2023-04-15 14:21:48.025 Error: Zigbee: Updating path from /home/pi/domoticz/plugins/Domoticz-Zigbee/ to /home/pi/domoticz/plugins/Domoticz-Zigbee is required, but no backward compatibility 2023-04-15 14:21:48.025 Error: Zigbee: Updating path from /home/pi/domoticz/plugins/Domoticz-Zigbee/ to /home/pi/domoticz/plugins/Domoticz-Zigbee is required, but no backward compatibility 2023-04-15 14:21:48.025 Error: Zigbee: Updating path from /home/pi/domoticz/plugins/Domoticz-Zigbee/Data/ to /home/pi/domoticz/plugins/Domoticz-Zigbee/Data is required, but no backward compatibility 2023-04-15 14:21:48.025 Error: Zigbee: Updating path from /home/pi/domoticz/plugins/Domoticz-Zigbee/Conf/ to /home/pi/domoticz/plugins/Domoticz-Zigbee/Conf is required, but no backward compatibility 2023-04-15 14:21:48.025 Error: Zigbee: Updating path from /home/pi/domoticz/plugins/Domoticz-Zigbee/OTAFirmware/ to /home/pi/domoticz/plugins/Domoticz-Zigbee/OTAFirmware is required, but no backward compatibility 2023-04-15 14:21:48.026 Error: Zigbee: Updating path from /home/pi/domoticz/plugins/Domoticz-Zigbee/Reports/ to /home/pi/domoticz/plugins/Domoticz-Zigbee/Reports is required, but no backward compatibility 2023-04-15 14:21:48.026 Error: Zigbee: Updating path from /home/pi/domoticz/plugins/Domoticz-Zigbee/www/ to /home/pi/domoticz/plugins/Domoticz-Zigbee/www is required, but no backward compatibility 2023-04-15 14:21:48.026 Error: Zigbee: Updating path from /home/pi/domoticz/plugins/Domoticz-Zigbee/Logs/ to /home/pi/domoticz/plugins/Domoticz-Zigbee/Logs is required, but no backward compatibility
and no device created in domoticz: 023-04-15 14:26:18.066 Status: Zigbee: Request Disabling Accepting new Hardware 2023-04-15 14:26:22.849 Status: Zigbee: Request Accepting new Hardware for 240 seconds 2023-04-15 14:26:34.979 Error: Zigbee: Device Annoucement: NwkId: a181 Ieee: a4c138a296abbb20 MacCap: 80 - Error has device seems not to be created !!! _PluginZigbee_28 (1).log
The error messages are normal. as regards to the device ,
are you sure that the device is not in the plugin ? Check via the Plugin WebUI Device Management ? Make sure to remove it, then restart the plugin and finaly redo the pairing
When doing the pairing, make sure that Domoticz allows to create new devices
I confirm no device created and devices are enables in domoticz
_PluginZigbee_28 (2).log one device created after a new trial
and the device is a selector with 4 levels we are progressing
after switching to stable branch device still reconized and s/eems works well : the four button change the selector level. Thanks for your help. Now I have an issue with another zigbee euipment (a siren). I think i will open a diffetent issue_
Not a good idea to switch from develop to stable6. What was not working on develop ? could you please provide what was not working on develop which requires a switch to stable ?
I had some random issues with other devices but maybe nothing to do with the develop banch I just switch again on develop branch and this morning all seems to work correctly
other issue I just fiound on this device: change of selector in domoticz has no effect (either by script or directly on the widget). Only button activation works on the remote control _PluginZigbee_28 (11).log
You need to 'Allow Domoticz actions on Widgets from remote devices' enable it in the Plugin settings.
good it works
Closed has completed