[BUG] ZHA sends events only by one key (qbkg03lm)

Shurik85 commented 2 years ago

Describe the bug ZHA sends events only by one key, the second key is simply ignored and not fixed in zha_event. The problem is observed on the quirks: zhaquirks.xiaomi.aqara.ctrl_neutral.CtrlNeutral. The device type is incorrectly determined - this device is not a router.

To Reproduce Steps to reproduce the behavior:

Go to 'Developer Panel - Event'
Click on 'zha_event'

Expected behavior Pressing the right key should display the event.

Screenshots

{ "node_descriptor": "NodeDescriptor(logical_type=, complex_descriptor_available=0, user_descriptor_available=0, reserved=0, aps_flags=0, frequency_band=, mac_capability_flags=, manufacturer_code=4151, maximum_buffer_size=127, maximum_incoming_transfer_size=100, server_mask=1, maximum_outgoing_transfer_size=100, descriptor_capability_field=, *allocate_address=True, *is_alternate_pan_coordinator=False, *is_coordinator=False, *is_end_device=False, *is_full_function_device=False, *is_mains_powered=True, *is_receiver_on_when_idle=False, *is_router=True, *is_security_capable=False)", "endpoints": { "1": { "profile_id": 260, "device_type": "0x0006", "in_clusters": [ "0x0000", "0x0001", "0x0002", "0x0003", "0x000a", "0x0019" ], "out_clusters": [ "0x0000", "0x000a", "0x0019" ] }, "2": { "profile_id": 260, "device_type": "0x0000", "in_clusters": [ "0x0004", "0x0005", "0x0006", "0x0010" ], "out_clusters": [] }, "3": { "profile_id": 260, "device_type": "0x0000", "in_clusters": [ "0x0004", "0x0005", "0x0006", "0x0010" ], "out_clusters": [] }, "4": { "profile_id": 260, "device_type": "0x0000", "in_clusters": [ "0x0006", "0x0012" ], "out_clusters": [] } }, "manufacturer": "LUMI", "model": "lumi.ctrl_neutral2", "class": "zhaquirks.xiaomi.aqara.ctrl_neutral.CtrlNeutral" } ```yaml Paste the device signature here. Don't remove the extra line breaks outside the ``` marks. ```

{ "home_assistant": { "installation_type": "Home Assistant OS", "version": "2022.6.6", "dev": false, "hassio": true, "virtualenv": false, "python_version": "3.9.12", "docker": true, "arch": "aarch64", "timezone": "Europe/Moscow", "os_name": "Linux", "os_version": "5.15.32-v8", "supervisor": "2022.05.3", "host_os": "Home Assistant OS 8.1", "docker_version": "20.10.14", "chassis": "embedded", "run_as_root": true }, "custom_components": { "hacs": { "version": "1.25.5", "requirements": [ "aiogithubapi>=22.2.4" ] }, "xiaomi_miot": { "version": "0.6.7", "requirements": [ "construct==2.10.56", "python-miio>=0.5.6", "micloud>=0.3" ] }, "yandex_dialogs": { "version": "1.2", "requirements": [] }, "xiaomi_miio_airpurifier": { "version": "2022.4.0.1", "requirements": [ "construct==2.10.56", "python-miio>=0.5.11" ] }, "ble_monitor": { "version": "8.8.1", "requirements": [ "pycryptodomex>=3.14.1", "janus>=1.0.0", "aioblescan>=0.2.12", "btsocket>=0.2.0", "pyric>=0.1.6.3" ] }, "pandora_cas": { "version": "2.0.0", "requirements": [] }, "yandex_smart_home": { "version": "0.5.2", "requirements": [] }, "sauresha": { "version": "0.6.0", "requirements": [] }, "dataplicity": { "version": "1.0.5", "requirements": [] }, "terneo": { "version": "0.9.3", "requirements": [ "requests", "voluptuous", "simplejson" ] }, "yandex_station": { "version": "3.10.0", "requirements": [] } }, "integration_manifest": { "domain": "zha", "name": "Zigbee Home Automation", "config_flow": true, "documentation": "https://www.home-assistant.io/integrations/zha", "requirements": [ "bellows==0.30.0", "pyserial==3.5", "pyserial-asyncio==0.6", "zha-quirks==0.0.75", "zigpy-deconz==0.16.0", "zigpy==0.45.1", "zigpy-xbee==0.14.0", "zigpy-zigate==0.7.4", "zigpy-znp==0.7.0" ], "usb": [ { "vid": "10C4", "pid": "EA60", "description": "*2652*", "known_devices": [ "slae.sh cc2652rb stick" ] }, { "vid": "10C4", "pid": "EA60", "description": "*sonoff*plus*", "known_devices": [ "sonoff zigbee dongle plus" ] }, { "vid": "10C4", "pid": "EA60", "description": "*tubeszb*", "known_devices": [ "TubesZB Coordinator" ] }, { "vid": "1A86", "pid": "7523", "description": "*tubeszb*", "known_devices": [ "TubesZB Coordinator" ] }, { "vid": "1A86", "pid": "7523", "description": "*zigstar*", "known_devices": [ "ZigStar Coordinators" ] }, { "vid": "1CF1", "pid": "0030", "description": "*conbee*", "known_devices": [ "Conbee II" ] }, { "vid": "10C4", "pid": "8A2A", "description": "*zigbee*", "known_devices": [ "Nortek HUSBZB-1" ] }, { "vid": "0403", "pid": "6015", "description": "*zigate*", "known_devices": [ "ZiGate+" ] }, { "vid": "10C4", "pid": "EA60", "description": "*zigate*", "known_devices": [ "ZiGate" ] }, { "vid": "10C4", "pid": "8B34", "description": "*bv 2010/10*", "known_devices": [ "Bitron Video AV2010/10" ] } ], "codeowners": [ "@dmulcahey", "@adminiuga" ], "zeroconf": [ { "type": "_esphomelib._tcp.local.", "name": "tube*" }, { "type": "_zigate-zigbee-gateway._tcp.local.", "name": "*zigate*" } ], "after_dependencies": [ "usb", "zeroconf" ], "iot_class": "local_polling", "loggers": [ "aiosqlite", "bellows", "crccheck", "pure_pcapy3", "zhaquirks", "zigpy", "zigpy_deconz", "zigpy_xbee", "zigpy_zigate", "zigpy_znp" ], "is_built_in": true }, "data": { "ieee": "**REDACTED**", "nwk": 10042, "manufacturer": "LUMI", "model": "lumi.ctrl_neutral2", "name": "LUMI lumi.ctrl_neutral2", "quirk_applied": true, "quirk_class": "zhaquirks.xiaomi.aqara.ctrl_neutral.CtrlNeutral", "manufacturer_code": 4151, "power_source": "Mains", "lqi": 255, "rssi": -35, "last_seen": "2022-06-17T19:17:34", "available": true, "device_type": "Router", "signature": { "node_descriptor": "NodeDescriptor(logical_type=, complex_descriptor_available=0, user_descriptor_available=0, reserved=0, aps_flags=0, frequency_band=, mac_capability_flags=, manufacturer_code=4151, maximum_buffer_size=127, maximum_incoming_transfer_size=100, server_mask=1, maximum_outgoing_transfer_size=100, descriptor_capability_field=, *allocate_address=True, *is_alternate_pan_coordinator=False, *is_coordinator=False, *is_end_device=False, *is_full_function_device=False, *is_mains_powered=True, *is_receiver_on_when_idle=False, *is_router=True, *is_security_capable=False)", "endpoints": { "1": { "profile_id": 260, "device_type": "0x0006", "in_clusters": [ "0x0000", "0x0001", "0x0002", "0x0003", "0x000a", "0x0019" ], "out_clusters": [ "0x0000", "0x000a", "0x0019" ] }, "2": { "profile_id": 260, "device_type": "0x0000", "in_clusters": [ "0x0004", "0x0005", "0x0006", "0x0010" ], "out_clusters": [] }, "3": { "profile_id": 260, "device_type": "0x0000", "in_clusters": [ "0x0004", "0x0005", "0x0006", "0x0010" ], "out_clusters": [] }, "4": { "profile_id": 260, "device_type": "0x0000", "in_clusters": [ "0x0006", "0x0012" ], "out_clusters": [] } } }, "entities": [ { "entity_id": "button.lumi_lumi_ctrl_neutral2_c8774903_identify", "name": "LUMI lumi.ctrl_neutral2" }, { "entity_id": "switch.lumi_lumi_ctrl_neutral2_c8774903_on_off", "name": "LUMI lumi.ctrl_neutral2" }, { "entity_id": "switch.lumi_lumi_ctrl_neutral2_c8774903_on_off_2", "name": "LUMI lumi.ctrl_neutral2" } ], "neighbors": [ { "device_type": "Coordinator", "rx_on_when_idle": "On", "relationship": "Parent", "extended_pan_id": "**REDACTED**", "ieee": "**REDACTED**", "nwk": "0x0000", "permit_joining": "Unknown", "depth": "0", "lqi": "147" } ], "endpoint_names": [ { "name": "REMOTE_CONTROL" }, { "name": "ON_OFF_SWITCH" }, { "name": "ON_OFF_SWITCH" }, { "name": "ON_OFF_SWITCH" } ], "user_given_name": "\u0414\u0435\u0442\u0441\u043a\u0430\u044f_\u0432\u044b\u043a\u043b\u044e\u0447\u0430\u0442\u0435\u043b\u044c", "device_reg_id": "640581fb8395214b65b67d51d8d8ff9c", "area_id": "detskaia" } } ```yaml Paste the diagnostic information here. Don't remove the extra line breaks outside the ``` marks. ```

Additional logs

``` Paste any additional debug logs here. Don't remove the extra line breaks outside the ``` marks. ```

Additional context Add any other context about the problem here.

javicalle commented 2 years ago

The current quirk only handles events for 1 button.

A new quirk needs to be made for 2 gang devices. My proposal is the following one:

"""Xiaomi aqara wall switch devices."""
import logging

from zigpy import types as t
from zigpy.profiles import zha
from zigpy.zcl.clusters.general import (
    AnalogInput,
    Basic,
    BinaryOutput,
    DeviceTemperature,
    Groups,
    Identify,
    MultistateInput,
    OnOff,
    Ota,
    Scenes,
    Time,
)

from zhaquirks import EventableCluster
from zhaquirks.const import (
    ARGS,
    ATTRIBUTE_ID,
    ATTRIBUTE_NAME,
    BUTTON,
    BUTTON_1,
    BUTTON_2,
    CLUSTER_ID,
    COMMAND,
    COMMAND_ATTRIBUTE_UPDATED,
    COMMAND_DOUBLE,
    COMMAND_HOLD,
    COMMAND_RELEASE,
    DEVICE_TYPE,
    ENDPOINT_ID,
    ENDPOINTS,
    INPUT_CLUSTERS,
    MODELS_INFO,
    OUTPUT_CLUSTERS,
    PROFILE_ID,
    SKIP_CONFIGURATION,
    VALUE,
)
from zhaquirks.xiaomi import (
    LUMI,
    BasicCluster,
    OnOffCluster,
    XiaomiCustomDevice,
    XiaomiPowerConfiguration,
)

ATTRIBUTE_ON_OFF = "on_off"
DOUBLE = "double"
HOLD = "long press"
PRESS_TYPES = {0: "long press", 1: "single", 2: "double"}
SINGLE = "single"
STATUS_TYPE_ATTR = 0x0055  # decimal = 85
XIAOMI_CLUSTER_ID = 0xFFFF
XIAOMI_DEVICE_TYPE = 0x5F01
XIAOMI_DEVICE_TYPE2 = 0x5F02
XIAOMI_DEVICE_TYPE3 = 0x5F03

_LOGGER = logging.getLogger(__name__)

# click attr 0xF000
# single click 0x3FF1F00
# double click 0xCFF1F00

class BasicClusterDecoupled(BasicCluster):
    """Adds attributes for decoupled mode."""

    # Known Options for 'decoupled_mode_<button>':
    # * 254 (decoupled)
    # * 18 (relay controlled)
    attributes = BasicCluster.attributes.copy()
    attributes.update(
        {
            0xFF22: ("decoupled_mode_left", t.uint8_t, True),
            0xFF23: ("decoupled_mode_right", t.uint8_t, True),
        }
    )

class WallSwitchOnOffCluster(EventableCluster, OnOff):
    """WallSwitchOnOffCluster: fire events corresponding to press type."""

class CtrlNeutral(XiaomiCustomDevice):
    """Aqara single key switch device."""

    signature = {
        MODELS_INFO: [
            (LUMI, "lumi.ctrl_neutral1"),
            (LUMI, "lumi.switch.b1lacn02"),
        ],
        ENDPOINTS: {
            # <SimpleDescriptor endpoint=1 profile=260 device_type=6
            # device_version=2
            # input_clusters=[0, 3, 1, 2, 25, 10]
            # output_clusters=[0, 10, 25]>
            1: {
                PROFILE_ID: zha.PROFILE_ID,
                DEVICE_TYPE: zha.DeviceType.REMOTE_CONTROL,
                INPUT_CLUSTERS: [
                    Basic.cluster_id,
                    Identify.cluster_id,
                    XiaomiPowerConfiguration.cluster_id,
                    DeviceTemperature.cluster_id,
                    Ota.cluster_id,
                    Time.cluster_id,
                ],
                OUTPUT_CLUSTERS: [Basic.cluster_id, Time.cluster_id, Ota.cluster_id],
            },
            # <SimpleDescriptor endpoint=2 profile=260 device_type=256
            # device_version=2
            # input_clusters=[16, 6, 4, 5]
            # output_clusters=[]>
            2: {
                PROFILE_ID: zha.PROFILE_ID,
                DEVICE_TYPE: zha.DeviceType.ON_OFF_LIGHT,
                INPUT_CLUSTERS: [
                    BinaryOutput.cluster_id,
                    OnOff.cluster_id,
                    Groups.cluster_id,
                    Scenes.cluster_id,
                ],
                OUTPUT_CLUSTERS: [],
            },
            # <SimpleDescriptor endpoint=3 profile=260 device_type=256
            # device_version=2
            # input_clusters=[16, 6, 4, 5]
            # output_clusters=[]
            3: {
                PROFILE_ID: zha.PROFILE_ID,
                DEVICE_TYPE: zha.DeviceType.ON_OFF_LIGHT,
                INPUT_CLUSTERS: [
                    BinaryOutput.cluster_id,
                    OnOff.cluster_id,
                    Groups.cluster_id,
                    Scenes.cluster_id,
                ],
                OUTPUT_CLUSTERS: [],
            },
            # <SimpleDescriptor endpoint=4 profile=260 device_type=0
            # device_version=2
            # input_clusters=[18, 6]
            # output_clusters=[]>
            4: {
                PROFILE_ID: zha.PROFILE_ID,
                DEVICE_TYPE: zha.DeviceType.ON_OFF_SWITCH,
                INPUT_CLUSTERS: [MultistateInput.cluster_id, OnOff.cluster_id],
                OUTPUT_CLUSTERS: [],
            },
            # <SimpleDescriptor endpoint=5 profile=260 device_type=0
            # device_version=2
            # input_clusters=[18, 6]
            # output_clusters=[]>
            5: {
                PROFILE_ID: zha.PROFILE_ID,
                DEVICE_TYPE: zha.DeviceType.ON_OFF_SWITCH,
                INPUT_CLUSTERS: [MultistateInput.cluster_id, OnOff.cluster_id],
                OUTPUT_CLUSTERS: [],
            },
            # <SimpleDescriptor endpoint=6 profile=260 device_type=0
            # device_version=2
            # input_clusters=[18, 6]
            # output_clusters=[]>
            6: {
                PROFILE_ID: zha.PROFILE_ID,
                DEVICE_TYPE: zha.DeviceType.ON_OFF_SWITCH,
                INPUT_CLUSTERS: [MultistateInput.cluster_id, OnOff.cluster_id],
                OUTPUT_CLUSTERS: [],
            },
            # <SimpleDescriptor endpoint=8 profile=260 device_type=83
            # device_version=2
            # input_clusters=[12]
            # output_clusters=[]>
            8: {
                PROFILE_ID: zha.PROFILE_ID,
                DEVICE_TYPE: zha.DeviceType.METER_INTERFACE,
                INPUT_CLUSTERS: [AnalogInput.cluster_id],
                OUTPUT_CLUSTERS: [],
            },
        },
    }

    replacement = {
        SKIP_CONFIGURATION: True,
        ENDPOINTS: {
            1: {
                DEVICE_TYPE: zha.DeviceType.REMOTE_CONTROL,
                INPUT_CLUSTERS: [
                    BasicClusterDecoupled,
                    Identify.cluster_id,
                    XiaomiPowerConfiguration.cluster_id,
                    DeviceTemperature.cluster_id,
                    Ota.cluster_id,
                    Time.cluster_id,
                ],
                OUTPUT_CLUSTERS: [Basic.cluster_id, Time.cluster_id, Ota.cluster_id],
            },
            2: {
                DEVICE_TYPE: zha.DeviceType.ON_OFF_SWITCH,
                INPUT_CLUSTERS: [
                    BinaryOutput.cluster_id,
                    OnOffCluster,
                    Groups.cluster_id,
                    Scenes.cluster_id,
                ],
                OUTPUT_CLUSTERS: [],
            },
            3: {
                DEVICE_TYPE: zha.DeviceType.ON_OFF_SWITCH,
                INPUT_CLUSTERS: [
                    BinaryOutput.cluster_id,
                    OnOffCluster,
                    Groups.cluster_id,
                    Scenes.cluster_id,
                ],
                OUTPUT_CLUSTERS: [],
            },
            4: {
                DEVICE_TYPE: zha.DeviceType.ON_OFF_SWITCH,
                INPUT_CLUSTERS: [
                    MultistateInput.cluster_id,
                    WallSwitchOnOffCluster,
                ],
                OUTPUT_CLUSTERS: [],
            },
        },
    }

    device_automation_triggers = {
        (COMMAND_HOLD, BUTTON): {
            ENDPOINT_ID: 4,
            CLUSTER_ID: 6,
            COMMAND: COMMAND_ATTRIBUTE_UPDATED,
            ARGS: {ATTRIBUTE_ID: 0, ATTRIBUTE_NAME: ATTRIBUTE_ON_OFF, VALUE: 0},
        },
        (COMMAND_RELEASE, BUTTON): {
            ENDPOINT_ID: 4,
            CLUSTER_ID: 6,
            COMMAND: COMMAND_ATTRIBUTE_UPDATED,
            ARGS: {ATTRIBUTE_ID: 0, ATTRIBUTE_NAME: ATTRIBUTE_ON_OFF, VALUE: 1},
        },
        (COMMAND_DOUBLE, BUTTON): {
            ENDPOINT_ID: 4,
            CLUSTER_ID: 6,
            COMMAND: COMMAND_ATTRIBUTE_UPDATED,
            ARGS: {ATTRIBUTE_ID: 0, ATTRIBUTE_NAME: ATTRIBUTE_ON_OFF, VALUE: 2},
        },
    }

class CtrlNeutral_2G(XiaomiCustomDevice):
    """Aqara double key switch device."""

    signature = {
        MODELS_INFO: [
            (LUMI, "lumi.ctrl_neutral2"),
            (LUMI, "lumi.switch.b2lacn02"),
        ],
        ENDPOINTS: {
            # <SimpleDescriptor endpoint=1 profile=260 device_type=6
            # device_version=2
            # input_clusters=[0, 3, 1, 2, 25, 10]
            # output_clusters=[0, 10, 25]>
            1: {
                PROFILE_ID: zha.PROFILE_ID,
                DEVICE_TYPE: zha.DeviceType.REMOTE_CONTROL,
                INPUT_CLUSTERS: [
                    Basic.cluster_id,
                    Identify.cluster_id,
                    XiaomiPowerConfiguration.cluster_id,
                    DeviceTemperature.cluster_id,
                    Ota.cluster_id,
                    Time.cluster_id,
                ],
                OUTPUT_CLUSTERS: [Basic.cluster_id, Time.cluster_id, Ota.cluster_id],
            },
            # <SimpleDescriptor endpoint=2 profile=260 device_type=256
            # device_version=2
            # input_clusters=[16, 6, 4, 5]
            # output_clusters=[]>
            2: {
                PROFILE_ID: zha.PROFILE_ID,
                DEVICE_TYPE: zha.DeviceType.ON_OFF_LIGHT,
                INPUT_CLUSTERS: [
                    BinaryOutput.cluster_id,
                    OnOff.cluster_id,
                    Groups.cluster_id,
                    Scenes.cluster_id,
                ],
                OUTPUT_CLUSTERS: [],
            },
            # <SimpleDescriptor endpoint=3 profile=260 device_type=256
            # device_version=2
            # input_clusters=[16, 6, 4, 5]
            # output_clusters=[]
            3: {
                PROFILE_ID: zha.PROFILE_ID,
                DEVICE_TYPE: zha.DeviceType.ON_OFF_LIGHT,
                INPUT_CLUSTERS: [
                    BinaryOutput.cluster_id,
                    OnOff.cluster_id,
                    Groups.cluster_id,
                    Scenes.cluster_id,
                ],
                OUTPUT_CLUSTERS: [],
            },
            # <SimpleDescriptor endpoint=4 profile=260 device_type=0
            # device_version=2
            # input_clusters=[18, 6]
            # output_clusters=[]>
            4: {
                PROFILE_ID: zha.PROFILE_ID,
                DEVICE_TYPE: zha.DeviceType.ON_OFF_SWITCH,
                INPUT_CLUSTERS: [MultistateInput.cluster_id, OnOff.cluster_id],
                OUTPUT_CLUSTERS: [],
            },
            # <SimpleDescriptor endpoint=5 profile=260 device_type=0
            # device_version=2
            # input_clusters=[18, 6]
            # output_clusters=[]>
            5: {
                PROFILE_ID: zha.PROFILE_ID,
                DEVICE_TYPE: zha.DeviceType.ON_OFF_SWITCH,
                INPUT_CLUSTERS: [MultistateInput.cluster_id, OnOff.cluster_id],
                OUTPUT_CLUSTERS: [],
            },
            # <SimpleDescriptor endpoint=6 profile=260 device_type=0
            # device_version=2
            # input_clusters=[18, 6]
            # output_clusters=[]>
            6: {
                PROFILE_ID: zha.PROFILE_ID,
                DEVICE_TYPE: zha.DeviceType.ON_OFF_SWITCH,
                INPUT_CLUSTERS: [MultistateInput.cluster_id, OnOff.cluster_id],
                OUTPUT_CLUSTERS: [],
            },
            # <SimpleDescriptor endpoint=8 profile=260 device_type=83
            # device_version=2
            # input_clusters=[12]
            # output_clusters=[]>
            8: {
                PROFILE_ID: zha.PROFILE_ID,
                DEVICE_TYPE: zha.DeviceType.METER_INTERFACE,
                INPUT_CLUSTERS: [AnalogInput.cluster_id],
                OUTPUT_CLUSTERS: [],
            },
        },
    }

    replacement = {
        SKIP_CONFIGURATION: True,
        ENDPOINTS: {
            1: {
                DEVICE_TYPE: zha.DeviceType.REMOTE_CONTROL,
                INPUT_CLUSTERS: [
                    BasicClusterDecoupled,
                    Identify.cluster_id,
                    XiaomiPowerConfiguration.cluster_id,
                    DeviceTemperature.cluster_id,
                    Ota.cluster_id,
                    Time.cluster_id,
                ],
                OUTPUT_CLUSTERS: [Basic.cluster_id, Time.cluster_id, Ota.cluster_id],
            },
            2: {
                DEVICE_TYPE: zha.DeviceType.ON_OFF_SWITCH,
                INPUT_CLUSTERS: [
                    BinaryOutput.cluster_id,
                    OnOffCluster,
                    Groups.cluster_id,
                    Scenes.cluster_id,
                ],
                OUTPUT_CLUSTERS: [],
            },
            3: {
                DEVICE_TYPE: zha.DeviceType.ON_OFF_SWITCH,
                INPUT_CLUSTERS: [
                    BinaryOutput.cluster_id,
                    OnOffCluster,
                    Groups.cluster_id,
                    Scenes.cluster_id,
                ],
                OUTPUT_CLUSTERS: [],
            },
            4: {
                DEVICE_TYPE: zha.DeviceType.ON_OFF_SWITCH,
                INPUT_CLUSTERS: [
                    MultistateInput.cluster_id,
                    WallSwitchOnOffCluster,
                ],
                OUTPUT_CLUSTERS: [],
            },
            5: {
                DEVICE_TYPE: zha.DeviceType.ON_OFF_SWITCH,
                INPUT_CLUSTERS: [
                    MultistateInput.cluster_id,
                    WallSwitchOnOffCluster,
                ],
                OUTPUT_CLUSTERS: [],
            },
        },
    }

    device_automation_triggers = {
        (COMMAND_HOLD, BUTTON_1): {
            ENDPOINT_ID: 4,
            CLUSTER_ID: 6,
            COMMAND: COMMAND_ATTRIBUTE_UPDATED,
            ARGS: {ATTRIBUTE_ID: 0, ATTRIBUTE_NAME: ATTRIBUTE_ON_OFF, VALUE: 0},
        },
        (COMMAND_RELEASE, BUTTON_1): {
            ENDPOINT_ID: 4,
            CLUSTER_ID: 6,
            COMMAND: COMMAND_ATTRIBUTE_UPDATED,
            ARGS: {ATTRIBUTE_ID: 0, ATTRIBUTE_NAME: ATTRIBUTE_ON_OFF, VALUE: 1},
        },
        (COMMAND_DOUBLE, BUTTON_1): {
            ENDPOINT_ID: 4,
            CLUSTER_ID: 6,
            COMMAND: COMMAND_ATTRIBUTE_UPDATED,
            ARGS: {ATTRIBUTE_ID: 0, ATTRIBUTE_NAME: ATTRIBUTE_ON_OFF, VALUE: 2},
        },
        (COMMAND_HOLD, BUTTON_2): {
            ENDPOINT_ID: 5,
            CLUSTER_ID: 6,
            COMMAND: COMMAND_ATTRIBUTE_UPDATED,
            ARGS: {ATTRIBUTE_ID: 0, ATTRIBUTE_NAME: ATTRIBUTE_ON_OFF, VALUE: 0},
        },
        (COMMAND_RELEASE, BUTTON_2): {
            ENDPOINT_ID: 5,
            CLUSTER_ID: 6,
            COMMAND: COMMAND_ATTRIBUTE_UPDATED,
            ARGS: {ATTRIBUTE_ID: 0, ATTRIBUTE_NAME: ATTRIBUTE_ON_OFF, VALUE: 1},
        },
        (COMMAND_DOUBLE, BUTTON_2): {
            ENDPOINT_ID: 5,
            CLUSTER_ID: 6,
            COMMAND: COMMAND_ATTRIBUTE_UPDATED,
            ARGS: {ATTRIBUTE_ID: 0, ATTRIBUTE_NAME: ATTRIBUTE_ON_OFF, VALUE: 2},
        },
    }

I have removed the 2 gang devices from the current quirk and added to the new one.

Shurik85 commented 2 years ago

Excellent. Everything is working.

zigpy / zha-device-handlers

[BUG] ZHA sends events only by one key (qbkg03lm) #1627