puddly
commented
2 years ago In what way are the numbers incorrect?
Closed Fierydwarf closed 1 year ago
puddly
commented
2 years ago In what way are the numbers incorrect?
Fierydwarf
commented
2 years ago 
At this time, i had a laptop plugged in. The amps, im assuming should be about 2.1 and the PolledSmartEnergy was reading 0 In Zigbee2MQTT.
Appologies, i thought i added a screen shot to the initial post
javicalle
commented
2 years ago Please, edit your first post and try to fix your code format.
Put the code inside the ``` marks and don't remove any breakline:
<details>
<summary>Device signature</summary>
```yaml
Here your code
If you can get it, just put the code between a pair of ``` marksI think ive formatted it correctly
javicalle
commented
2 years ago I believe that the current (A) can be fixed just setting a value to the ac_current_divisor (id: 0x0603) from the ElectricalMeasurement (Endpoint id: 1, Id: 0x0b04, Type: in) cluster.
First check if the attribute has a value already assigned (pushing the 'Get Zigbee attribute' button).
If it has no value assigned, set the value 100.
If it already has a value assigned, apply the x100 correction to the value it has. For example, if the current value were 10, you would assign a value of 1000.
The PolledSmartEnergy is an incremental value.
It will continue to grow and I don't know if there is any way to reset it. Maybe the best will be remove the device and pair it again.
Fierydwarf
commented
2 years ago Ive set the value to 100, as stated (the 'Get zigbee attribute" showed 0) Pushing 'Set zigbee attribute' to set it but the value is still incorrect. Pushing Get zigbee attribute after setting it returns a '0' value again. Also tried setting the value then pushing 'reconfigure' same result.
TheJulianJES
commented
2 years ago A quirk that overrides those attributes should work fine. For example: https://github.com/zigpy/zha-device-handlers/blob/d40f0d3b3efc41ffe6297c32a230f0200f2ca711/zhaquirks/tuya/__init__.py#L974-L979 That's a replacement for the EM cluster for many Tuya plugs that have the same/similar issue.
Fierydwarf
commented
2 years ago Thank you for this, but, i have no idea what to do with it. Can you point me in the direction of some instructions?
javicalle
commented
2 years ago You would need enable the local quirk configuration. There are some info for example here:
Once configured, copy the current ts011f_plug.py file inside the custom_zha_quirks folder:
Add the proposed quirk at the end of the file. That would be my proposal:
class Plug_v2(CustomDevice):
"""Another TS011F Tuya plug."""
signature = {
MODEL: "TS011F",
ENDPOINTS: {
# "profile_id": 260,
# "device_type": "0x0051",
# "in_clusters": ["0x0000", "0x0003", "0x0004", "0x0005", "0x0006", "0x0702", "0x0b04", "0xe001"],
# "out_clusters": []
1: {
PROFILE_ID: zha.PROFILE_ID,
DEVICE_TYPE: zha.DeviceType.SMART_PLUG,
INPUT_CLUSTERS: [
Basic.cluster_id,
Identify.cluster_id,
Groups.cluster_id,
Scenes.cluster_id,
OnOff.cluster_id,
Metering.cluster_id,
ElectricalMeasurement.cluster_id,
TuyaZBExternalSwitchTypeCluster.cluster_id,
],
OUTPUT_CLUSTERS: [],
},
},
}
replacement = {
ENDPOINTS: {
1: {
PROFILE_ID: zha.PROFILE_ID,
DEVICE_TYPE: zha.DeviceType.ON_OFF_PLUG_IN_UNIT,
INPUT_CLUSTERS: [
Basic.cluster_id,
Identify.cluster_id,
Groups.cluster_id,
Scenes.cluster_id,
TuyaZBOnOffAttributeCluster,
TuyaZBMeteringCluster,
TuyaZBElectricalMeasurement,
TuyaZBExternalSwitchTypeCluster,
],
OUTPUT_CLUSTERS: [],
},
},
}Once added you need to restart HA, remove the device and pair it again.
Look at the device signature, it must change to the new quirk (check the class part).
dmulcahey
commented
2 years ago @Fierydwarf did this work?
Fierydwarf
commented
2 years ago @dmulcahey Sorry, i missed the update. Ive trid ti tonight and no it didnt work. The values are still the same.The Class within Signature displays as "class": "Zigpy.device.Device"
{
"node_descriptor": "NodeDescriptor(logical_type=<LogicalType.Router: 1>, complex_descriptor_available=0, user_descriptor_available=0, reserved=0, aps_flags=0, frequency_band=<FrequencyBand.Freq2400MHz: 8>, mac_capability_flags=<MACCapabilityFlags.AllocateAddress|RxOnWhenIdle|MainsPowered|FullFunctionDevice: 142>, manufacturer_code=4660, maximum_buffer_size=108, maximum_incoming_transfer_size=0, server_mask=11264, maximum_outgoing_transfer_size=0, descriptor_capability_field=<DescriptorCapability.NONE: 0>, *allocate_address=True, *is_alternate_pan_coordinator=False, *is_coordinator=False, *is_end_device=False, *is_full_function_device=True, *is_mains_powered=True, *is_receiver_on_when_idle=True, *is_router=True, *is_security_capable=False)",
"endpoints": {
"1": {
"profile_id": 260,
"device_type": "0x0051",
"in_clusters": [
"0x0000",
"0x0003",
"0x0004",
"0x0005",
"0x0006",
"0x0702",
"0x0b04",
"0xe001"
],
"out_clusters": []
}
},
"manufacturer": "_TZ3000_okaz9tjs",
"model": "TS011F",
"class": "zigpy.device.Device"
}Upssss, my fault.
Change the TuyaZBE000Cluster for the TuyaZBExternalSwitchTypeCluster. Already updated in my comment.
Fierydwarf
commented
2 years ago No luck. i think i need to delete the files, and zigby_quirks and start fresh.
{
"node_descriptor": "NodeDescriptor(logical_type=<LogicalType.Router: 1>, complex_descriptor_available=0, user_descriptor_available=0, reserved=0, aps_flags=0, frequency_band=<FrequencyBand.Freq2400MHz: 8>, mac_capability_flags=<MACCapabilityFlags.AllocateAddress|RxOnWhenIdle|MainsPowered|FullFunctionDevice: 142>, manufacturer_code=4660, maximum_buffer_size=108, maximum_incoming_transfer_size=0, server_mask=11264, maximum_outgoing_transfer_size=0, descriptor_capability_field=<DescriptorCapability.NONE: 0>, *allocate_address=True, *is_alternate_pan_coordinator=False, *is_coordinator=False, *is_end_device=False, *is_full_function_device=True, *is_mains_powered=True, *is_receiver_on_when_idle=True, *is_router=True, *is_security_capable=False)",
"endpoints": {
"1": {
"profile_id": 260,
"device_type": "0x0051",
"in_clusters": [
"0x0000",
"0x0003",
"0x0004",
"0x0005",
"0x0006",
"0x0702",
"0x0b04",
"0xe001"
],
"out_clusters": []
}
},
"manufacturer": "_TZ3000_okaz9tjs",
"model": "TS011F",
"class": "zigpy.device.Device"
}Double check if there is a __pycache__ folder in your local quirk folder and delete it before restart HA.
Fierydwarf
commented
2 years ago Progress!
"node_descriptor": "NodeDescriptor(logical_type=<LogicalType.Router: 1>, complex_descriptor_available=0, user_descriptor_available=0, reserved=0, aps_flags=0, frequency_band=<FrequencyBand.Freq2400MHz: 8>, mac_capability_flags=<MACCapabilityFlags.AllocateAddress|RxOnWhenIdle|MainsPowered|FullFunctionDevice: 142>, manufacturer_code=4660, maximum_buffer_size=108, maximum_incoming_transfer_size=0, server_mask=11264, maximum_outgoing_transfer_size=0, descriptor_capability_field=<DescriptorCapability.NONE: 0>, *allocate_address=True, *is_alternate_pan_coordinator=False, *is_coordinator=False, *is_end_device=False, *is_full_function_device=True, *is_mains_powered=True, *is_receiver_on_when_idle=True, *is_router=True, *is_security_capable=False)",
"endpoints": {
"1": {
"profile_id": 260,
"device_type": "0x010a",
"in_clusters": [
"0x0000",
"0x0003",
"0x0004",
"0x0005",
"0x0006",
"0x0702",
"0x0b04",
"0xe001"
],
"out_clusters": []
}
},
"manufacturer": "_TZ3000_okaz9tjs",
"model": "TS011F",
"class": "ts011f_plug.Plug_v2"
}```Progress! I deleted the ZHA quirks option in HA, deleted the files and folders and started fresh. Still may need a bit of tweaking but its much closer than it was previously
{
"node_descriptor": "NodeDescriptor(logical_type=<LogicalType.Router: 1>, complex_descriptor_available=0, user_descriptor_available=0, reserved=0, aps_flags=0, frequency_band=<FrequencyBand.Freq2400MHz: 8>, mac_capability_flags=<MACCapabilityFlags.AllocateAddress|RxOnWhenIdle|MainsPowered|FullFunctionDevice: 142>, manufacturer_code=4660, maximum_buffer_size=108, maximum_incoming_transfer_size=0, server_mask=11264, maximum_outgoing_transfer_size=0, descriptor_capability_field=<DescriptorCapability.NONE: 0>, *allocate_address=True, *is_alternate_pan_coordinator=False, *is_coordinator=False, *is_end_device=False, *is_full_function_device=True, *is_mains_powered=True, *is_receiver_on_when_idle=True, *is_router=True, *is_security_capable=False)",
"endpoints": {
"1": {
"profile_id": 260,
"device_type": "0x010a",
"in_clusters": [
"0x0000",
"0x0003",
"0x0004",
"0x0005",
"0x0006",
"0x0702",
"0x0b04",
"0xe001"
],
"out_clusters": []
}
},
"manufacturer": "_TZ3000_okaz9tjs",
"model": "TS011F",
"class": "ts011f_plug.Plug_v2"
}We will need more information about what is working and what isn't. At least the diagnosis information from the device and the current and expected values for the rogue entities.
Fierydwarf
commented
2 years ago Appoligise for the slow reply. life. So the values are pretty much there, enought "there" for me. Thankyou!. Im not not able to add the entity to the Home Assistant Energy dashboard. Im assuming this would need raising a seperate tickt for?
javicalle
commented
1 year ago Is the quirk from https://github.com/zigpy/zha-device-handlers/issues/1764#issuecomment-1272390644 the right version? Is there something else to fix? The quirk must be merged to the mainstream to be included in next versions of HA.
Im not not able to add the entity to the Home Assistant Energy dashboard. Im assuming this would need raising a seperate tickt for?
Yes, it will be the best.
Fierydwarf
commented
1 year ago Quirks resolved the issue
jesus51998
commented
9 months ago Hi, I have 4 device kind “_TZ3000_okaz9tjs”, "TS011F", I followed the thread, but my device, don’t work well, the energy and current are multiplier for 100 or 1000.
Somebody can help my.
I do.. 1.- Delete device. 2.- delete folder pycache 3.- copy file https://github.com/zigpy/zha-device-handlers/blob/dev/zhaquirks/tuya/ts011f_plug.py in my folder /config/custom_zha_quirks/ 4.- In configuration.yaml I insert: zha: enable_quirks: true custom_quirks_path: /config/custom_zha_quirks/ 5.- Reboot HA. 6.- Add device But my device don’t change…
‘’’{
"node_descriptor": "NodeDescriptor(logical_type=<LogicalType.Router: 1>, complex_descriptor_available=0, user_descriptor_available=0, reserved=0, aps_flags=0, frequency_band=<FrequencyBand.Freq2400MHz: 8>, mac_capability_flags=<MACCapabilityFlags.FullFunctionDevice|MainsPowered|RxOnWhenIdle|AllocateAddress: 142>, manufacturer_code=4660, maximum_buffer_size=108, maximum_incoming_transfer_size=0, server_mask=11264, maximum_outgoing_transfer_size=0, descriptor_capability_field=<DescriptorCapability.NONE: 0>, allocate_address=True, is_alternate_pan_coordinator=False, is_coordinator=False, is_end_device=False, is_full_function_device=True, is_mains_powered=True, is_receiver_on_when_idle=True, is_router=True, *is_security_capable=False)",
"endpoints": { "1": { "profile_id": "0x0104", "device_type": "0x0100", "input_clusters": [ "0x0000", "0x0003", "0x0004", "0x0005", "0x0006", "0x000a", "0x0702", "0x0b04", "0x1000", "0xe000", "0xe001" ], "output_clusters": [] } }, "manufacturer": "_TZ3000_okaz9tjs", "model": "TS011F", "class": "zigpy.device.Device" }’’’
I changed the "ts011f_plug.py" file, with comments from some forum threads, and then I did all the steps from 1 to 6 but my device doesn't change.
TeaMoe
commented
9 months ago @jesus51998
Hi, last week i got some _TZ3000_okaz9tjs Plugs from AliExpress and i also noticed that the current and energy readings are off by 100s. Additionally these plugs identify themselves as lights so that none of the existing quirks match. I solved the issue for me by creating the following quirk, which is essentially just a copy of the Plug_v2 but with an ON_OFF_LIGHT as DeviceType. I'll do a proper pull request later.
"""TS011F plug."""
from zigpy.profiles import zgp, zha
from zigpy.quirks import CustomDevice
from zigpy.zcl.clusters.general import (
Basic,
GreenPowerProxy,
Groups,
Identify,
OnOff,
Ota,
Scenes,
Time,
)
from zigpy.zcl.clusters.homeautomation import ElectricalMeasurement
from zigpy.zcl.clusters.lightlink import LightLink
from zigpy.zcl.clusters.measurement import TemperatureMeasurement
from zigpy.zcl.clusters.smartenergy import Metering
from zhaquirks.const import (
DEVICE_TYPE,
ENDPOINTS,
INPUT_CLUSTERS,
MODEL,
MODELS_INFO,
OUTPUT_CLUSTERS,
PROFILE_ID,
)
from zhaquirks.quirk_ids import TUYA_PLUG_ONOFF
from zhaquirks.tuya import (
EnchantedDevice,
TuyaNewManufCluster,
TuyaZB1888Cluster,
TuyaZBE000Cluster,
TuyaZBElectricalMeasurement,
TuyaZBExternalSwitchTypeCluster,
TuyaZBMeteringCluster,
TuyaZBMeteringClusterWithUnit,
TuyaZBOnOffAttributeCluster,
)
class Plug_v2l(EnchantedDevice):
"""Another TS011F Tuya plug. First one using this definition is _TZ3000_okaz9tjs."""
quirk_id = TUYA_PLUG_ONOFF
signature = {
MODEL: "TS011F",
ENDPOINTS: {
# "profile_id": 260,
# "device_type": "0x0100",
# "in_clusters": ["0x0000", "0x0003", "0x0004", "0x0005", "0x0006", "0x0702", "0x0b04", "0xe001"],
# "in_clusters": ["0x0000", "0x0003", "0x0004", "0x0005", "0x0006", "0x000a", "0x0702", "0x0b04", "0x1000", "0xe000", "0xe001"],
# "out_clusters": []
1: {
PROFILE_ID: zha.PROFILE_ID,
DEVICE_TYPE: zha.DeviceType.ON_OFF_LIGHT,
INPUT_CLUSTERS: [
Basic.cluster_id,
Identify.cluster_id,
Groups.cluster_id,
Scenes.cluster_id,
OnOff.cluster_id,
Time.cluster_id,
Metering.cluster_id,
ElectricalMeasurement.cluster_id,
LightLink.cluster_id,
TuyaZBE000Cluster.cluster_id,
TuyaZBExternalSwitchTypeCluster.cluster_id,
],
OUTPUT_CLUSTERS: [],
},
},
}
replacement = {
ENDPOINTS: {
1: {
PROFILE_ID: zha.PROFILE_ID,
DEVICE_TYPE: zha.DeviceType.SMART_PLUG,
INPUT_CLUSTERS: [
Basic.cluster_id,
Identify.cluster_id,
Groups.cluster_id,
Scenes.cluster_id,
TuyaZBOnOffAttributeCluster,
Time.cluster_id,
TuyaZBMeteringClusterWithUnit,
TuyaZBElectricalMeasurement,
LightLink.cluster_id,
TuyaZBE000Cluster.cluster_id,
TuyaZBExternalSwitchTypeCluster,
],
OUTPUT_CLUSTERS: [],
},
},
}Hi, it works really good, I proved a lot of thing but nothing did work. In this moment work perfect. thank you
cordvision
commented
8 months ago I could use some help. I bought a "smart breaker" (not a plug) as you can see here:
It shows up under the same name as the plug: "TS011F by _TZ3000_zrm3oxsh"
The current (A) is off by a factor of x1000 and the Summation delivered is off by about a factor of 100x.
I was hoping that the posted custom quirk would fix the problem.
However, I can't get it to load the quirk for the device. There is a good chance that I'm doing something wrong (I'm quite new at this, but I do already have other custom quirks running successfully). Here is a screenshot of the Zigbee device. I don't see a path to the custom quirk in "Zigbee Info":
First of all, do I need to edit the posted code at all and add the signature of my device? The only thing I changed is the following: # "device_type": "0x0051", to # "device_type": "0x010a" I did this because if I go to "Manage Zigbee Device" --> "Signatur", I see the following
{
"node_descriptor": "NodeDescriptor(logical_type=<LogicalType.Router: 1>, complex_descriptor_available=0, user_descriptor_available=0, reserved=0, aps_flags=0, frequency_band=<FrequencyBand.Freq2400MHz: 8>, mac_capability_flags=<MACCapabilityFlags.FullFunctionDevice|MainsPowered|RxOnWhenIdle|AllocateAddress: 142>, manufacturer_code=4098, maximum_buffer_size=82, maximum_incoming_transfer_size=82, server_mask=11264, maximum_outgoing_transfer_size=82, descriptor_capability_field=<DescriptorCapability.NONE: 0>, *allocate_address=True, *is_alternate_pan_coordinator=False, *is_coordinator=False, *is_end_device=False, *is_full_function_device=True, *is_mains_powered=True, *is_receiver_on_when_idle=True, *is_router=True, *is_security_capable=False)",
"endpoints": {
"1": {
"profile_id": "0x0104",
"device_type": "0x010a",
"input_clusters": [
"0x0000",
"0x0003",
"0x0004",
"0x0005",
"0x0006",
"0x0402",
"0x0702",
"0x0b04",
"0xe000",
"0xe001"
],
"output_clusters": [
"0x000a",
"0x0019"
]
},
"242": {
"profile_id": "0xa1e0",
"device_type": "0x0061",
"input_clusters": [],
"output_clusters": [
"0x0021"
]
}
},
"manufacturer": "_TZ3000_zrm3oxsh",
"model": "TS011F",
"class": "zigpy.device.Device"
}
For the Quirk, I copied the supplied code and then added the relevant custom code at the very end. Here is the entire Quirk I'm suing. This is the code that resides here: /homeassistant/zha_quirks/ts011f_plug.py
"""TS011F plug."""
from zigpy.profiles import zgp, zha
from zigpy.quirks import CustomDevice
from zigpy.zcl.clusters.general import (
Basic,
GreenPowerProxy,
Groups,
Identify,
OnOff,
Ota,
Scenes,
Time,
)
from zigpy.zcl.clusters.homeautomation import ElectricalMeasurement
from zigpy.zcl.clusters.lightlink import LightLink
from zigpy.zcl.clusters.measurement import TemperatureMeasurement
from zigpy.zcl.clusters.smartenergy import Metering
from zhaquirks.const import (
DEVICE_TYPE,
ENDPOINTS,
INPUT_CLUSTERS,
MODEL,
MODELS_INFO,
OUTPUT_CLUSTERS,
PROFILE_ID,
)
from zhaquirks.quirk_ids import TUYA_PLUG_ONOFF
from zhaquirks.tuya import (
EnchantedDevice,
TuyaNewManufCluster,
TuyaZB1888Cluster,
TuyaZBE000Cluster,
TuyaZBElectricalMeasurement,
TuyaZBExternalSwitchTypeCluster,
TuyaZBMeteringCluster,
TuyaZBMeteringClusterWithUnit,
TuyaZBOnOffAttributeCluster,
)
class Plug(EnchantedDevice):
"""Tuya plug with restore power state support."""
quirk_id = TUYA_PLUG_ONOFF
signature = {
MODEL: "TS011F",
ENDPOINTS: {
# <SimpleDescriptor endpoint=1 profile=266 device_type=81
# device_version=1
# input_clusters=[0, 3, 4, 5, 6, 9, 1794, 2820, 57344, 57345]
# output_clusters=[10, 25]>
1: {
PROFILE_ID: zha.PROFILE_ID,
DEVICE_TYPE: zha.DeviceType.ON_OFF_PLUG_IN_UNIT,
INPUT_CLUSTERS: [
Basic.cluster_id,
Identify.cluster_id,
Groups.cluster_id,
Scenes.cluster_id,
OnOff.cluster_id,
Metering.cluster_id,
ElectricalMeasurement.cluster_id,
TuyaZBE000Cluster.cluster_id,
TuyaZBExternalSwitchTypeCluster.cluster_id,
],
OUTPUT_CLUSTERS: [Time.cluster_id, Ota.cluster_id],
},
# <SimpleDescriptor endpoint=242 profile=41440 device_type=97
# device_version=1
# input_clusters=[]
# output_clusters=[33]>
242: {
PROFILE_ID: zgp.PROFILE_ID,
DEVICE_TYPE: zgp.DeviceType.PROXY_BASIC,
INPUT_CLUSTERS: [],
OUTPUT_CLUSTERS: [GreenPowerProxy.cluster_id],
},
},
}
replacement = {
ENDPOINTS: {
1: {
PROFILE_ID: zha.PROFILE_ID,
DEVICE_TYPE: zha.DeviceType.ON_OFF_PLUG_IN_UNIT,
INPUT_CLUSTERS: [
Basic.cluster_id,
Identify.cluster_id,
Groups.cluster_id,
Scenes.cluster_id,
TuyaZBOnOffAttributeCluster,
TuyaZBMeteringCluster,
TuyaZBElectricalMeasurement,
TuyaZBE000Cluster,
TuyaZBExternalSwitchTypeCluster,
],
OUTPUT_CLUSTERS: [Time.cluster_id, Ota.cluster_id],
},
},
}
class Plug_1AC(CustomDevice):
"""Tuya plug without metering with restore power state support."""
quirk_id = TUYA_PLUG_ONOFF
signature = {
MODEL: "TS011F",
ENDPOINTS: {
# <SimpleDescriptor endpoint=11 profile=260 device_type=266
# device_version=1
# input_clusters=[0, 3, 4, 5, 6]
# output_clusters=[10, 25]>
11: {
PROFILE_ID: zha.PROFILE_ID,
DEVICE_TYPE: zha.DeviceType.ON_OFF_PLUG_IN_UNIT,
INPUT_CLUSTERS: [
Basic.cluster_id,
Identify.cluster_id,
Groups.cluster_id,
Scenes.cluster_id,
OnOff.cluster_id,
],
OUTPUT_CLUSTERS: [Time.cluster_id, Ota.cluster_id],
},
# <SimpleDescriptor endpoint=242 profile=41440 device_type=97
# device_version=0
# input_clusters=[]
# output_clusters=[33]>
242: {
PROFILE_ID: zgp.PROFILE_ID,
DEVICE_TYPE: zgp.DeviceType.PROXY_BASIC,
INPUT_CLUSTERS: [],
OUTPUT_CLUSTERS: [GreenPowerProxy.cluster_id],
},
},
}
replacement = {
ENDPOINTS: {
11: {
PROFILE_ID: zha.PROFILE_ID,
DEVICE_TYPE: zha.DeviceType.ON_OFF_PLUG_IN_UNIT,
INPUT_CLUSTERS: [
Basic.cluster_id,
Identify.cluster_id,
Groups.cluster_id,
Scenes.cluster_id,
TuyaZBOnOffAttributeCluster,
],
OUTPUT_CLUSTERS: [Time.cluster_id, Ota.cluster_id],
},
242: {
PROFILE_ID: zgp.PROFILE_ID,
DEVICE_TYPE: zgp.DeviceType.PROXY_BASIC,
INPUT_CLUSTERS: [],
OUTPUT_CLUSTERS: [GreenPowerProxy.cluster_id],
},
},
}
class Plug_2AC_2USB(EnchantedDevice):
"""Tuya 2 outlet + 2 USB with restore power state support."""
quirk_id = TUYA_PLUG_ONOFF
signature = {
MODELS_INFO: [("_TZ3000_3zofvcaa", "TS011F")],
ENDPOINTS: {
# <SimpleDescriptor endpoint=1 profile=260 device_type=266
# device_version=1
# input_clusters=[0, 3, 4, 5, 6, 57344, 57345]
# output_clusters=[10, 25]>
1: {
PROFILE_ID: zha.PROFILE_ID,
DEVICE_TYPE: zha.DeviceType.ON_OFF_PLUG_IN_UNIT,
INPUT_CLUSTERS: [
Basic.cluster_id,
Identify.cluster_id,
Groups.cluster_id,
Scenes.cluster_id,
OnOff.cluster_id,
TuyaZBE000Cluster.cluster_id,
TuyaZBExternalSwitchTypeCluster.cluster_id,
],
OUTPUT_CLUSTERS: [Time.cluster_id, Ota.cluster_id],
},
# <SimpleDescriptor endpoint=2 profile=260 device_type=266
# device_version=1
# input_clusters=[4, 5, 6, 57345]
# output_clusters=[]>
2: {
PROFILE_ID: zha.PROFILE_ID,
DEVICE_TYPE: zha.DeviceType.ON_OFF_PLUG_IN_UNIT,
INPUT_CLUSTERS: [
Groups.cluster_id,
Scenes.cluster_id,
OnOff.cluster_id,
TuyaZBExternalSwitchTypeCluster.cluster_id,
],
OUTPUT_CLUSTERS: [],
},
# <SimpleDescriptor endpoint=3 profile=260 device_type=266
# device_version=1
# input_clusters=[4, 5, 6, 57345]
# output_clusters=[]>
3: {
PROFILE_ID: zha.PROFILE_ID,
DEVICE_TYPE: zha.DeviceType.ON_OFF_PLUG_IN_UNIT,
INPUT_CLUSTERS: [
Groups.cluster_id,
Scenes.cluster_id,
OnOff.cluster_id,
TuyaZBExternalSwitchTypeCluster.cluster_id,
],
OUTPUT_CLUSTERS: [],
},
# <SimpleDescriptor endpoint=4 profile=260 device_type=266
# device_version=1
# input_clusters=[4, 5, 6, 57345]
# output_clusters=[]>
4: {
PROFILE_ID: zha.PROFILE_ID,
DEVICE_TYPE: zha.DeviceType.ON_OFF_PLUG_IN_UNIT,
INPUT_CLUSTERS: [
Groups.cluster_id,
Scenes.cluster_id,
OnOff.cluster_id,
TuyaZBExternalSwitchTypeCluster.cluster_id,
],
OUTPUT_CLUSTERS: [],
},
# <SimpleDescriptor endpoint=242 profile=41440 device_type=97
# device_version=1
# input_clusters=[]
# output_clusters=[33]>
242: {
PROFILE_ID: zgp.PROFILE_ID,
DEVICE_TYPE: zgp.DeviceType.PROXY_BASIC,
INPUT_CLUSTERS: [],
OUTPUT_CLUSTERS: [GreenPowerProxy.cluster_id],
},
},
}
replacement = {
ENDPOINTS: {
1: {
PROFILE_ID: zha.PROFILE_ID,
DEVICE_TYPE: zha.DeviceType.ON_OFF_PLUG_IN_UNIT,
INPUT_CLUSTERS: [
Basic.cluster_id,
Identify.cluster_id,
Groups.cluster_id,
Scenes.cluster_id,
TuyaZBOnOffAttributeCluster,
TuyaZBE000Cluster,
TuyaZBExternalSwitchTypeCluster,
],
OUTPUT_CLUSTERS: [Time.cluster_id, Ota.cluster_id],
},
2: {
PROFILE_ID: zha.PROFILE_ID,
DEVICE_TYPE: zha.DeviceType.ON_OFF_PLUG_IN_UNIT,
INPUT_CLUSTERS: [
Groups.cluster_id,
Scenes.cluster_id,
OnOff.cluster_id,
],
OUTPUT_CLUSTERS: [],
},
3: {
PROFILE_ID: zha.PROFILE_ID,
DEVICE_TYPE: zha.DeviceType.ON_OFF_PLUG_IN_UNIT,
INPUT_CLUSTERS: [
Groups.cluster_id,
Scenes.cluster_id,
OnOff.cluster_id,
],
OUTPUT_CLUSTERS: [],
},
4: {
PROFILE_ID: zha.PROFILE_ID,
DEVICE_TYPE: zha.DeviceType.ON_OFF_PLUG_IN_UNIT,
INPUT_CLUSTERS: [
Groups.cluster_id,
Scenes.cluster_id,
OnOff.cluster_id,
],
OUTPUT_CLUSTERS: [],
},
242: {
PROFILE_ID: zgp.PROFILE_ID,
DEVICE_TYPE: zgp.DeviceType.PROXY_BASIC,
INPUT_CLUSTERS: [],
OUTPUT_CLUSTERS: [GreenPowerProxy.cluster_id],
},
},
}
class Plug_3AC_4USB(CustomDevice):
"""Tuya 3 outlet + 4 USB with restore power state support."""
quirk_id = TUYA_PLUG_ONOFF
signature = {
MODEL: "TS011F",
ENDPOINTS: {
# <SimpleDescriptor endpoint=1 profile=260 device_type=266
# device_version=1
# input_clusters=[0, 3, 4, 5, 6]
# output_clusters=[10, 25]>
1: {
PROFILE_ID: zha.PROFILE_ID,
DEVICE_TYPE: zha.DeviceType.ON_OFF_PLUG_IN_UNIT,
INPUT_CLUSTERS: [
Basic.cluster_id,
Identify.cluster_id,
Groups.cluster_id,
Scenes.cluster_id,
OnOff.cluster_id,
],
OUTPUT_CLUSTERS: [Time.cluster_id, Ota.cluster_id],
},
# <SimpleDescriptor endpoint=2 profile=260 device_type=266
# device_version=1
# input_clusters=[3, 4, 5, 6]
# output_clusters=[]>
2: {
PROFILE_ID: zha.PROFILE_ID,
DEVICE_TYPE: zha.DeviceType.ON_OFF_PLUG_IN_UNIT,
INPUT_CLUSTERS: [
Identify.cluster_id,
Groups.cluster_id,
Scenes.cluster_id,
OnOff.cluster_id,
],
OUTPUT_CLUSTERS: [],
},
# <SimpleDescriptor endpoint=3 profile=260 device_type=266
# device_version=1
# input_clusters=[3, 4, 5, 6]
# output_clusters=[]>
3: {
PROFILE_ID: zha.PROFILE_ID,
DEVICE_TYPE: zha.DeviceType.ON_OFF_PLUG_IN_UNIT,
INPUT_CLUSTERS: [
Identify.cluster_id,
Groups.cluster_id,
Scenes.cluster_id,
OnOff.cluster_id,
],
OUTPUT_CLUSTERS: [],
},
# <SimpleDescriptor endpoint=242 profile=41440 device_type=97
# device_version=1
# input_clusters=[]
# output_clusters=[33]>
242: {
PROFILE_ID: zgp.PROFILE_ID,
DEVICE_TYPE: zgp.DeviceType.PROXY_BASIC,
INPUT_CLUSTERS: [],
OUTPUT_CLUSTERS: [GreenPowerProxy.cluster_id],
},
},
}
replacement = {
ENDPOINTS: {
1: {
PROFILE_ID: zha.PROFILE_ID,
DEVICE_TYPE: zha.DeviceType.ON_OFF_PLUG_IN_UNIT,
INPUT_CLUSTERS: [
Basic.cluster_id,
Identify.cluster_id,
Groups.cluster_id,
Scenes.cluster_id,
TuyaZBOnOffAttributeCluster,
],
OUTPUT_CLUSTERS: [Time.cluster_id, Ota.cluster_id],
},
2: {
PROFILE_ID: zha.PROFILE_ID,
DEVICE_TYPE: zha.DeviceType.ON_OFF_PLUG_IN_UNIT,
INPUT_CLUSTERS: [
Identify.cluster_id,
Groups.cluster_id,
Scenes.cluster_id,
TuyaZBOnOffAttributeCluster,
],
OUTPUT_CLUSTERS: [],
},
3: {
PROFILE_ID: zha.PROFILE_ID,
DEVICE_TYPE: zha.DeviceType.ON_OFF_PLUG_IN_UNIT,
INPUT_CLUSTERS: [
Identify.cluster_id,
Groups.cluster_id,
Scenes.cluster_id,
TuyaZBOnOffAttributeCluster,
],
OUTPUT_CLUSTERS: [],
},
242: {
PROFILE_ID: zgp.PROFILE_ID,
DEVICE_TYPE: zgp.DeviceType.PROXY_BASIC,
INPUT_CLUSTERS: [],
OUTPUT_CLUSTERS: [GreenPowerProxy.cluster_id],
},
},
}
class Plug_4AC_2USB(CustomDevice):
"""Tuya 4 outlet + 2 USB surge protector with restore power state support."""
quirk_id = TUYA_PLUG_ONOFF
signature = {
MODEL: "TS011F",
ENDPOINTS: {
# <SimpleDescriptor endpoint=1 profile=260 device_type=266
# device_version=1
# input_clusters=[0, 3, 4, 5, 6, 57344, 57345]
# output_clusters=[10, 25]>
1: {
PROFILE_ID: zha.PROFILE_ID,
DEVICE_TYPE: zha.DeviceType.ON_OFF_PLUG_IN_UNIT,
INPUT_CLUSTERS: [
Basic.cluster_id,
Identify.cluster_id,
Groups.cluster_id,
Scenes.cluster_id,
OnOff.cluster_id,
TuyaZBE000Cluster.cluster_id,
TuyaZBExternalSwitchTypeCluster.cluster_id,
],
OUTPUT_CLUSTERS: [Time.cluster_id, Ota.cluster_id],
},
# <SimpleDescriptor endpoint=2 profile=260 device_type=266
# device_version=1
# input_clusters=[3, 4, 5, 6, 57344, 57345]
# output_clusters=[]>
2: {
PROFILE_ID: zha.PROFILE_ID,
DEVICE_TYPE: zha.DeviceType.ON_OFF_PLUG_IN_UNIT,
INPUT_CLUSTERS: [
Identify.cluster_id,
Groups.cluster_id,
Scenes.cluster_id,
OnOff.cluster_id,
TuyaZBE000Cluster.cluster_id,
TuyaZBExternalSwitchTypeCluster.cluster_id,
],
OUTPUT_CLUSTERS: [],
},
# <SimpleDescriptor endpoint=3 profile=260 device_type=266
# device_version=1
# input_clusters=[3, 4, 5, 6, 57344, 57345]
# output_clusters=[]>
3: {
PROFILE_ID: zha.PROFILE_ID,
DEVICE_TYPE: zha.DeviceType.ON_OFF_PLUG_IN_UNIT,
INPUT_CLUSTERS: [
Identify.cluster_id,
Groups.cluster_id,
Scenes.cluster_id,
OnOff.cluster_id,
TuyaZBE000Cluster.cluster_id,
TuyaZBExternalSwitchTypeCluster.cluster_id,
],
OUTPUT_CLUSTERS: [],
},
# <SimpleDescriptor endpoint=4 profile=260 device_type=266
# device_version=1
# input_clusters=[3, 4, 5, 6, 57344, 57345]
# output_clusters=[]>
4: {
PROFILE_ID: zha.PROFILE_ID,
DEVICE_TYPE: zha.DeviceType.ON_OFF_PLUG_IN_UNIT,
INPUT_CLUSTERS: [
Identify.cluster_id,
Groups.cluster_id,
Scenes.cluster_id,
OnOff.cluster_id,
TuyaZBE000Cluster.cluster_id,
TuyaZBExternalSwitchTypeCluster.cluster_id,
],
OUTPUT_CLUSTERS: [],
},
# <SimpleDescriptor endpoint=5 profile=260 device_type=266
# device_version=1
# input_clusters=[3, 4, 5, 6, 57344, 57345]
# output_clusters=[]>
5: {
PROFILE_ID: zha.PROFILE_ID,
DEVICE_TYPE: zha.DeviceType.ON_OFF_PLUG_IN_UNIT,
INPUT_CLUSTERS: [
Identify.cluster_id,
Groups.cluster_id,
Scenes.cluster_id,
OnOff.cluster_id,
TuyaZBE000Cluster.cluster_id,
TuyaZBExternalSwitchTypeCluster.cluster_id,
],
OUTPUT_CLUSTERS: [],
},
# <SimpleDescriptor endpoint=242 profile=41440 device_type=97
# device_version=1
# input_clusters=[]
# output_clusters=[33]>
242: {
PROFILE_ID: zgp.PROFILE_ID,
DEVICE_TYPE: zgp.DeviceType.PROXY_BASIC,
INPUT_CLUSTERS: [],
OUTPUT_CLUSTERS: [GreenPowerProxy.cluster_id],
},
},
}
replacement = {
ENDPOINTS: {
1: {
PROFILE_ID: zha.PROFILE_ID,
DEVICE_TYPE: zha.DeviceType.ON_OFF_PLUG_IN_UNIT,
INPUT_CLUSTERS: [
Basic.cluster_id,
Identify.cluster_id,
Groups.cluster_id,
Scenes.cluster_id,
TuyaZBOnOffAttributeCluster,
TuyaZBE000Cluster,
TuyaZBExternalSwitchTypeCluster,
],
OUTPUT_CLUSTERS: [Time.cluster_id, Ota.cluster_id],
},
2: {
PROFILE_ID: zha.PROFILE_ID,
DEVICE_TYPE: zha.DeviceType.ON_OFF_PLUG_IN_UNIT,
INPUT_CLUSTERS: [
Identify.cluster_id,
Groups.cluster_id,
Scenes.cluster_id,
TuyaZBOnOffAttributeCluster,
TuyaZBE000Cluster,
TuyaZBExternalSwitchTypeCluster,
],
OUTPUT_CLUSTERS: [],
},
3: {
PROFILE_ID: zha.PROFILE_ID,
DEVICE_TYPE: zha.DeviceType.ON_OFF_PLUG_IN_UNIT,
INPUT_CLUSTERS: [
Identify.cluster_id,
Groups.cluster_id,
Scenes.cluster_id,
TuyaZBOnOffAttributeCluster,
TuyaZBE000Cluster,
TuyaZBExternalSwitchTypeCluster,
],
OUTPUT_CLUSTERS: [],
},
4: {
PROFILE_ID: zha.PROFILE_ID,
DEVICE_TYPE: zha.DeviceType.ON_OFF_PLUG_IN_UNIT,
INPUT_CLUSTERS: [
Identify.cluster_id,
Groups.cluster_id,
Scenes.cluster_id,
TuyaZBOnOffAttributeCluster,
TuyaZBE000Cluster,
TuyaZBExternalSwitchTypeCluster,
],
OUTPUT_CLUSTERS: [],
},
5: {
PROFILE_ID: zha.PROFILE_ID,
DEVICE_TYPE: zha.DeviceType.ON_OFF_PLUG_IN_UNIT,
INPUT_CLUSTERS: [
Identify.cluster_id,
Groups.cluster_id,
Scenes.cluster_id,
TuyaZBOnOffAttributeCluster,
TuyaZBE000Cluster,
TuyaZBExternalSwitchTypeCluster,
],
OUTPUT_CLUSTERS: [],
},
242: {
PROFILE_ID: zgp.PROFILE_ID,
DEVICE_TYPE: zgp.DeviceType.PROXY_BASIC,
INPUT_CLUSTERS: [],
OUTPUT_CLUSTERS: [GreenPowerProxy.cluster_id],
},
},
}
class Plug_TZ3210_2AC(CustomDevice):
"""TS0011F 2 outlet plug."""
quirk_id = TUYA_PLUG_ONOFF
signature = {
MODEL: "TS011F",
ENDPOINTS: {
# <SimpleDescriptor endpoint=1 profile=260 device_type=81
# device_version=1
# input_clusters=[0, 3, 4, 5, 6, 1794, 2820, 61184]
# output_clusters=[25, 10]>
1: {
PROFILE_ID: zha.PROFILE_ID,
DEVICE_TYPE: zha.DeviceType.SMART_PLUG,
INPUT_CLUSTERS: [
Basic.cluster_id,
Identify.cluster_id,
Groups.cluster_id,
Scenes.cluster_id,
OnOff.cluster_id,
Metering.cluster_id,
ElectricalMeasurement.cluster_id,
TuyaNewManufCluster.cluster_id,
],
OUTPUT_CLUSTERS: [Time.cluster_id, Ota.cluster_id],
},
# <SimpleDescriptor endpoint=2 profile=260 device_type=81
# device_version=1
# input_clusters=[3, 4, 5, 6, 61184]
# output_clusters=[25, 10]>
2: {
PROFILE_ID: zha.PROFILE_ID,
DEVICE_TYPE: zha.DeviceType.SMART_PLUG,
INPUT_CLUSTERS: [
Identify.cluster_id,
Groups.cluster_id,
Scenes.cluster_id,
OnOff.cluster_id,
TuyaNewManufCluster.cluster_id,
],
OUTPUT_CLUSTERS: [],
},
# <SimpleDescriptor endpoint=242 profile=41440 device_type=97
# device_version=0
# input_clusters=[]
# output_clusters=[33]>
242: {
PROFILE_ID: zgp.PROFILE_ID,
DEVICE_TYPE: zgp.DeviceType.PROXY_BASIC,
INPUT_CLUSTERS: [],
OUTPUT_CLUSTERS: [GreenPowerProxy.cluster_id],
},
},
}
replacement = {
ENDPOINTS: {
1: {
PROFILE_ID: zha.PROFILE_ID,
DEVICE_TYPE: zha.DeviceType.SMART_PLUG,
INPUT_CLUSTERS: [
Basic.cluster_id,
Identify.cluster_id,
Groups.cluster_id,
Scenes.cluster_id,
TuyaZBOnOffAttributeCluster,
TuyaZBMeteringCluster,
TuyaZBElectricalMeasurement,
TuyaNewManufCluster,
],
OUTPUT_CLUSTERS: [Time.cluster_id, Ota.cluster_id],
},
2: {
PROFILE_ID: zha.PROFILE_ID,
DEVICE_TYPE: zha.DeviceType.SMART_PLUG,
INPUT_CLUSTERS: [
Identify.cluster_id,
Groups.cluster_id,
Scenes.cluster_id,
TuyaZBOnOffAttributeCluster,
TuyaNewManufCluster,
],
OUTPUT_CLUSTERS: [],
},
242: {
PROFILE_ID: zgp.PROFILE_ID,
DEVICE_TYPE: zgp.DeviceType.PROXY_BASIC,
INPUT_CLUSTERS: [],
OUTPUT_CLUSTERS: [GreenPowerProxy.cluster_id],
},
},
}
class Plug_TZ3210_1AC(CustomDevice):
"""TS0011F 1 outlet plug."""
quirk_id = TUYA_PLUG_ONOFF
signature = {
MODEL: "TS011F",
ENDPOINTS: {
# <SimpleDescriptor endpoint=1 profile=260 device_type=266
# device_version=1
# input_clusters=[0, 3, 4, 5, 6, 1794, 2820, 61184]
# output_clusters=[25, 10]>
1: {
PROFILE_ID: zha.PROFILE_ID,
DEVICE_TYPE: zha.DeviceType.ON_OFF_PLUG_IN_UNIT,
INPUT_CLUSTERS: [
Basic.cluster_id,
Identify.cluster_id,
Groups.cluster_id,
Scenes.cluster_id,
OnOff.cluster_id,
Metering.cluster_id,
ElectricalMeasurement.cluster_id,
TuyaNewManufCluster.cluster_id,
],
OUTPUT_CLUSTERS: [Time.cluster_id, Ota.cluster_id],
},
# <SimpleDescriptor endpoint=242 profile=41440 device_type=97
# device_version=0
# input_clusters=[]
# output_clusters=[33]>
242: {
PROFILE_ID: zgp.PROFILE_ID,
DEVICE_TYPE: zgp.DeviceType.PROXY_BASIC,
INPUT_CLUSTERS: [],
OUTPUT_CLUSTERS: [GreenPowerProxy.cluster_id],
},
},
}
replacement = {
ENDPOINTS: {
1: {
PROFILE_ID: zha.PROFILE_ID,
DEVICE_TYPE: zha.DeviceType.ON_OFF_PLUG_IN_UNIT,
INPUT_CLUSTERS: [
Basic.cluster_id,
Identify.cluster_id,
Groups.cluster_id,
Scenes.cluster_id,
TuyaZBOnOffAttributeCluster,
TuyaZBMeteringCluster,
TuyaZBElectricalMeasurement,
TuyaNewManufCluster,
],
OUTPUT_CLUSTERS: [Time.cluster_id, Ota.cluster_id],
},
242: {
PROFILE_ID: zgp.PROFILE_ID,
DEVICE_TYPE: zgp.DeviceType.PROXY_BASIC,
INPUT_CLUSTERS: [],
OUTPUT_CLUSTERS: [GreenPowerProxy.cluster_id],
},
},
}
class Plug_4AC_2USB_cfnprab5(EnchantedDevice):
"""Tuya 4 outlet + 2 USB surge protector with restore power state support."""
quirk_id = TUYA_PLUG_ONOFF
signature = {
MODEL: "TS011F",
ENDPOINTS: {
# <SimpleDescriptor endpoint=1 profile=260 device_type=266
# device_version=1
# input_clusters=[0, 3, 4, 5, 6, 57344, 57345]
# output_clusters=[10, 25]>
1: {
PROFILE_ID: zha.PROFILE_ID,
DEVICE_TYPE: zha.DeviceType.ON_OFF_PLUG_IN_UNIT,
INPUT_CLUSTERS: [
Basic.cluster_id,
Identify.cluster_id,
Groups.cluster_id,
Scenes.cluster_id,
OnOff.cluster_id,
TuyaZBE000Cluster.cluster_id,
TuyaZBExternalSwitchTypeCluster.cluster_id,
],
OUTPUT_CLUSTERS: [Time.cluster_id, Ota.cluster_id],
},
# <SimpleDescriptor endpoint=2 profile=260 device_type=266
# device_version=1
# input_clusters=[4, 5, 6, 57345]
# output_clusters=[]>
2: {
PROFILE_ID: zha.PROFILE_ID,
DEVICE_TYPE: zha.DeviceType.ON_OFF_PLUG_IN_UNIT,
INPUT_CLUSTERS: [
Groups.cluster_id,
Scenes.cluster_id,
OnOff.cluster_id,
TuyaZBExternalSwitchTypeCluster.cluster_id,
],
OUTPUT_CLUSTERS: [],
},
# <SimpleDescriptor endpoint=3 profile=260 device_type=266
# device_version=1
# input_clusters=[4, 5, 6, 57345]
# output_clusters=[]>
3: {
PROFILE_ID: zha.PROFILE_ID,
DEVICE_TYPE: zha.DeviceType.ON_OFF_PLUG_IN_UNIT,
INPUT_CLUSTERS: [
Groups.cluster_id,
Scenes.cluster_id,
OnOff.cluster_id,
TuyaZBExternalSwitchTypeCluster.cluster_id,
],
OUTPUT_CLUSTERS: [],
},
# <SimpleDescriptor endpoint=4 profile=260 device_type=266
# device_version=1
# input_clusters=[4, 5, 6, 57345]
# output_clusters=[]>
4: {
PROFILE_ID: zha.PROFILE_ID,
DEVICE_TYPE: zha.DeviceType.ON_OFF_PLUG_IN_UNIT,
INPUT_CLUSTERS: [
Groups.cluster_id,
Scenes.cluster_id,
OnOff.cluster_id,
TuyaZBExternalSwitchTypeCluster.cluster_id,
],
OUTPUT_CLUSTERS: [],
},
# <SimpleDescriptor endpoint=5 profile=260 device_type=266
# device_version=1
# input_clusters=[4, 5, 6, 57345]
# output_clusters=[]>
5: {
PROFILE_ID: zha.PROFILE_ID,
DEVICE_TYPE: zha.DeviceType.ON_OFF_PLUG_IN_UNIT,
INPUT_CLUSTERS: [
Groups.cluster_id,
Scenes.cluster_id,
OnOff.cluster_id,
TuyaZBExternalSwitchTypeCluster.cluster_id,
],
OUTPUT_CLUSTERS: [],
},
# <SimpleDescriptor endpoint=242 profile=41440 device_type=97
# device_version=1
# input_clusters=[]
# output_clusters=[33]>
242: {
PROFILE_ID: zgp.PROFILE_ID,
DEVICE_TYPE: zgp.DeviceType.PROXY_BASIC,
INPUT_CLUSTERS: [],
OUTPUT_CLUSTERS: [GreenPowerProxy.cluster_id],
},
},
}
replacement = {
ENDPOINTS: {
1: {
PROFILE_ID: zha.PROFILE_ID,
DEVICE_TYPE: zha.DeviceType.ON_OFF_PLUG_IN_UNIT,
INPUT_CLUSTERS: [
Basic.cluster_id,
Identify.cluster_id,
Groups.cluster_id,
Scenes.cluster_id,
TuyaZBOnOffAttributeCluster,
TuyaZBE000Cluster,
TuyaZBExternalSwitchTypeCluster,
],
OUTPUT_CLUSTERS: [Time.cluster_id, Ota.cluster_id],
},
2: {
PROFILE_ID: zha.PROFILE_ID,
DEVICE_TYPE: zha.DeviceType.ON_OFF_PLUG_IN_UNIT,
INPUT_CLUSTERS: [
Groups.cluster_id,
Scenes.cluster_id,
TuyaZBOnOffAttributeCluster,
TuyaZBExternalSwitchTypeCluster,
],
OUTPUT_CLUSTERS: [],
},
3: {
PROFILE_ID: zha.PROFILE_ID,
DEVICE_TYPE: zha.DeviceType.ON_OFF_PLUG_IN_UNIT,
INPUT_CLUSTERS: [
Groups.cluster_id,
Scenes.cluster_id,
TuyaZBOnOffAttributeCluster,
TuyaZBExternalSwitchTypeCluster,
],
OUTPUT_CLUSTERS: [],
},
4: {
PROFILE_ID: zha.PROFILE_ID,
DEVICE_TYPE: zha.DeviceType.ON_OFF_PLUG_IN_UNIT,
INPUT_CLUSTERS: [
Groups.cluster_id,
Scenes.cluster_id,
TuyaZBOnOffAttributeCluster,
TuyaZBExternalSwitchTypeCluster,
],
OUTPUT_CLUSTERS: [],
},
5: {
PROFILE_ID: zha.PROFILE_ID,
DEVICE_TYPE: zha.DeviceType.ON_OFF_PLUG_IN_UNIT,
INPUT_CLUSTERS: [
Groups.cluster_id,
Scenes.cluster_id,
TuyaZBOnOffAttributeCluster,
TuyaZBExternalSwitchTypeCluster,
],
OUTPUT_CLUSTERS: [],
},
242: {
PROFILE_ID: zgp.PROFILE_ID,
DEVICE_TYPE: zgp.DeviceType.PROXY_BASIC,
INPUT_CLUSTERS: [],
OUTPUT_CLUSTERS: [GreenPowerProxy.cluster_id],
},
},
}
class Plug_4AC_2USB_Metering(EnchantedDevice):
"""Tuya Tuya 4 outlet + 2 USB with power metering."""
quirk_id = TUYA_PLUG_ONOFF
signature = {
MODEL: "TS011F",
ENDPOINTS: {
1: {
# "profile_id": 260,
# "device_type": "0x010a",
# "in_clusters": ["0x0000","0x0003","0x0004","0x0005","0x0006","0x0702","0x0b04","0xe000","0xe001"],
# "out_clusters": ["0x000a","0x0019"]
PROFILE_ID: zha.PROFILE_ID,
DEVICE_TYPE: zha.DeviceType.ON_OFF_PLUG_IN_UNIT,
INPUT_CLUSTERS: [
Basic.cluster_id,
Identify.cluster_id,
Groups.cluster_id,
Scenes.cluster_id,
OnOff.cluster_id,
Metering.cluster_id,
ElectricalMeasurement.cluster_id,
TuyaZBE000Cluster.cluster_id,
TuyaZBExternalSwitchTypeCluster.cluster_id,
],
OUTPUT_CLUSTERS: [Time.cluster_id, Ota.cluster_id],
},
2: {
# "profile_id": 260,
# "device_type": "0x010a",
# "in_clusters": ["0x0004","0x0005","0x0006","0xe001"],
# "out_clusters": []
PROFILE_ID: zha.PROFILE_ID,
DEVICE_TYPE: zha.DeviceType.ON_OFF_PLUG_IN_UNIT,
INPUT_CLUSTERS: [
Groups.cluster_id,
Scenes.cluster_id,
OnOff.cluster_id,
TuyaZBExternalSwitchTypeCluster.cluster_id,
],
OUTPUT_CLUSTERS: [],
},
3: {
# "profile_id": 260,
# "device_type": "0x010a",
# "in_clusters": ["0x0004","0x0005","0x0006","0xe001"],
# "out_clusters": []
PROFILE_ID: zha.PROFILE_ID,
DEVICE_TYPE: zha.DeviceType.ON_OFF_PLUG_IN_UNIT,
INPUT_CLUSTERS: [
Groups.cluster_id,
Scenes.cluster_id,
OnOff.cluster_id,
TuyaZBExternalSwitchTypeCluster.cluster_id,
],
OUTPUT_CLUSTERS: [],
},
242: {
# "profile_id": 41440,
# "device_type": "0x0061",
# "in_clusters": [],
# "out_clusters": ["0x0021"]
PROFILE_ID: zgp.PROFILE_ID,
DEVICE_TYPE: zgp.DeviceType.PROXY_BASIC,
INPUT_CLUSTERS: [],
OUTPUT_CLUSTERS: [GreenPowerProxy.cluster_id],
},
},
}
replacement = {
ENDPOINTS: {
1: {
PROFILE_ID: zha.PROFILE_ID,
DEVICE_TYPE: zha.DeviceType.ON_OFF_PLUG_IN_UNIT,
INPUT_CLUSTERS: [
Basic.cluster_id,
Identify.cluster_id,
Groups.cluster_id,
Scenes.cluster_id,
TuyaZBOnOffAttributeCluster,
TuyaZBMeteringCluster,
TuyaZBElectricalMeasurement,
TuyaZBE000Cluster,
TuyaZBExternalSwitchTypeCluster,
],
OUTPUT_CLUSTERS: [Time.cluster_id, Ota.cluster_id],
},
2: {
PROFILE_ID: zha.PROFILE_ID,
DEVICE_TYPE: zha.DeviceType.ON_OFF_PLUG_IN_UNIT,
INPUT_CLUSTERS: [
Groups.cluster_id,
Scenes.cluster_id,
TuyaZBOnOffAttributeCluster,
TuyaZBExternalSwitchTypeCluster,
],
OUTPUT_CLUSTERS: [],
},
3: {
PROFILE_ID: zha.PROFILE_ID,
DEVICE_TYPE: zha.DeviceType.ON_OFF_PLUG_IN_UNIT,
INPUT_CLUSTERS: [
Groups.cluster_id,
Scenes.cluster_id,
TuyaZBOnOffAttributeCluster,
TuyaZBExternalSwitchTypeCluster,
],
OUTPUT_CLUSTERS: [],
},
242: {
PROFILE_ID: zgp.PROFILE_ID,
DEVICE_TYPE: zgp.DeviceType.PROXY_BASIC,
INPUT_CLUSTERS: [],
OUTPUT_CLUSTERS: [GreenPowerProxy.cluster_id],
},
},
}
class Plug_v2(EnchantedDevice):
"""Another TS011F Tuya plug. First one using this definition is _TZ3000_okaz9tjs."""
quirk_id = TUYA_PLUG_ONOFF
signature = {
MODEL: "TS011F",
ENDPOINTS: {
# "profile_id": 260,
# "device_type": "0x0051",
# "in_clusters": ["0x0000", "0x0003", "0x0004", "0x0005", "0x0006", "0x0702", "0x0b04", "0xe001"],
# "out_clusters": []
1: {
PROFILE_ID: zha.PROFILE_ID,
DEVICE_TYPE: zha.DeviceType.SMART_PLUG,
INPUT_CLUSTERS: [
Basic.cluster_id,
Identify.cluster_id,
Groups.cluster_id,
Scenes.cluster_id,
OnOff.cluster_id,
Metering.cluster_id,
ElectricalMeasurement.cluster_id,
TuyaZBExternalSwitchTypeCluster.cluster_id,
],
OUTPUT_CLUSTERS: [],
},
},
}
replacement = {
ENDPOINTS: {
1: {
PROFILE_ID: zha.PROFILE_ID,
DEVICE_TYPE: zha.DeviceType.SMART_PLUG,
INPUT_CLUSTERS: [
Basic.cluster_id,
Identify.cluster_id,
Groups.cluster_id,
Scenes.cluster_id,
TuyaZBOnOffAttributeCluster,
TuyaZBMeteringClusterWithUnit,
TuyaZBElectricalMeasurement,
TuyaZBExternalSwitchTypeCluster,
],
OUTPUT_CLUSTERS: [],
},
},
}
class Plug_v3(EnchantedDevice):
"""Tuya TS011F plug. One plug is _Tz3000_0Zfrhq4I."""
quirk_id = TUYA_PLUG_ONOFF
signature = {
MODEL: "TS011F",
ENDPOINTS: {
1: {
PROFILE_ID: zha.PROFILE_ID,
DEVICE_TYPE: zha.DeviceType.SMART_PLUG,
INPUT_CLUSTERS: [
Basic.cluster_id,
Identify.cluster_id,
Groups.cluster_id,
Scenes.cluster_id,
OnOff.cluster_id,
Time.cluster_id,
Metering.cluster_id,
ElectricalMeasurement.cluster_id,
LightLink.cluster_id,
TuyaZB1888Cluster.cluster_id,
TuyaZBE000Cluster.cluster_id,
],
OUTPUT_CLUSTERS: [
Ota.cluster_id,
],
},
242: {
PROFILE_ID: zgp.PROFILE_ID,
DEVICE_TYPE: zgp.DeviceType.PROXY_BASIC,
INPUT_CLUSTERS: [],
OUTPUT_CLUSTERS: [
GreenPowerProxy.cluster_id,
],
},
},
}
replacement = {
ENDPOINTS: {
1: {
PROFILE_ID: zha.PROFILE_ID,
DEVICE_TYPE: zha.DeviceType.SMART_PLUG,
INPUT_CLUSTERS: [
Basic.cluster_id,
Identify.cluster_id,
Groups.cluster_id,
Scenes.cluster_id,
TuyaZBOnOffAttributeCluster,
Time.cluster_id,
TuyaZBMeteringClusterWithUnit,
TuyaZBElectricalMeasurement,
LightLink.cluster_id,
TuyaZB1888Cluster,
TuyaZBE000Cluster,
],
OUTPUT_CLUSTERS: [
Ota.cluster_id,
],
},
242: {
PROFILE_ID: zgp.PROFILE_ID,
DEVICE_TYPE: zgp.DeviceType.PROXY_BASIC,
INPUT_CLUSTERS: [],
OUTPUT_CLUSTERS: [
GreenPowerProxy.cluster_id,
],
},
},
}
class Plug_2AC_var03(CustomDevice):
"""Tuya 2 socket wall outlet with child lock and power-restore state support."""
quirk_id = TUYA_PLUG_ONOFF
signature = {
MODEL: "TS011F",
ENDPOINTS: {
# <SimpleDescriptor endpoint=1 profile=260 device_type=9
# device_version=0
# input_clusters=[0, 10, 4, 5, 6]
# output_clusters=[25]>
1: {
PROFILE_ID: zha.PROFILE_ID,
DEVICE_TYPE: zha.DeviceType.MAIN_POWER_OUTLET,
INPUT_CLUSTERS: [
Basic.cluster_id,
Time.cluster_id,
Groups.cluster_id,
Scenes.cluster_id,
OnOff.cluster_id,
],
OUTPUT_CLUSTERS: [Ota.cluster_id],
},
# <SimpleDescriptor endpoint=2 profile=260 device_type=9
# device_version=0
# input_clusters=[4, 5, 6]
# output_clusters=[]>
2: {
PROFILE_ID: zha.PROFILE_ID,
DEVICE_TYPE: zha.DeviceType.MAIN_POWER_OUTLET,
INPUT_CLUSTERS: [
Groups.cluster_id,
Scenes.cluster_id,
OnOff.cluster_id,
],
OUTPUT_CLUSTERS: [],
},
},
}
replacement = {
ENDPOINTS: {
1: {
PROFILE_ID: zha.PROFILE_ID,
DEVICE_TYPE: zha.DeviceType.MAIN_POWER_OUTLET,
INPUT_CLUSTERS: [
Basic.cluster_id,
Time.cluster_id,
Groups.cluster_id,
Scenes.cluster_id,
# N.B. The ClickSmart CMA30036 (_TYZB01_hlla45kx), supports
# but does not implement the backlight_mode extended
# attribute. For this device, changing this attribute
# has no effect on the switch lights.
TuyaZBOnOffAttributeCluster,
],
OUTPUT_CLUSTERS: [Ota.cluster_id],
},
2: {
PROFILE_ID: zha.PROFILE_ID,
DEVICE_TYPE: zha.DeviceType.MAIN_POWER_OUTLET,
INPUT_CLUSTERS: [
Groups.cluster_id,
Scenes.cluster_id,
OnOff.cluster_id,
],
OUTPUT_CLUSTERS: [],
},
},
}
class Plug_CB_Metering(EnchantedDevice):
"""Circuit breaker with monitoring, e.g. Tongou TO-Q-SY1-JZT. First one using this definition was _TZ3000_qeuvnohg."""
quirk_id = TUYA_PLUG_ONOFF
signature = {
MODEL: "TS011F",
MODELS_INFO: [("_TZ3000_qeuvnohg", "TS011F")],
ENDPOINTS: {
# <SimpleDescriptor endpoint=1 profile=260 device_type=266
# device_version=1
# input_clusters=[0, 3, 4, 5, 6, 1026, 1794, 2820, 57344, 57345]
# output_clusters=[10, 25]>
1: {
PROFILE_ID: zha.PROFILE_ID,
DEVICE_TYPE: zha.DeviceType.ON_OFF_PLUG_IN_UNIT,
INPUT_CLUSTERS: [
Basic.cluster_id,
Identify.cluster_id,
Groups.cluster_id,
Scenes.cluster_id,
OnOff.cluster_id,
TemperatureMeasurement.cluster_id, # Note: no temperature sensor claimed in manual and it's constant -6.3C
Metering.cluster_id,
ElectricalMeasurement.cluster_id,
TuyaZBE000Cluster.cluster_id,
TuyaZBExternalSwitchTypeCluster.cluster_id,
],
OUTPUT_CLUSTERS: [Time.cluster_id, Ota.cluster_id],
},
# <SimpleDescriptor endpoint=242 profile=41440 device_type=97
# device_version=1
# input_clusters=[]
# output_clusters=[33]>
242: {
PROFILE_ID: zgp.PROFILE_ID,
DEVICE_TYPE: zgp.DeviceType.PROXY_BASIC,
INPUT_CLUSTERS: [],
OUTPUT_CLUSTERS: [GreenPowerProxy.cluster_id],
},
},
}
replacement = {
ENDPOINTS: {
1: {
PROFILE_ID: zha.PROFILE_ID,
DEVICE_TYPE: zha.DeviceType.ON_OFF_PLUG_IN_UNIT,
INPUT_CLUSTERS: [
Basic.cluster_id,
Identify.cluster_id,
Groups.cluster_id,
Scenes.cluster_id,
TuyaZBOnOffAttributeCluster,
TuyaZBMeteringCluster,
TuyaZBElectricalMeasurement,
TuyaZBE000Cluster,
TuyaZBExternalSwitchTypeCluster,
],
OUTPUT_CLUSTERS: [Time.cluster_id, Ota.cluster_id],
},
242: {
PROFILE_ID: zgp.PROFILE_ID,
DEVICE_TYPE: zgp.DeviceType.PROXY_BASIC,
INPUT_CLUSTERS: [],
OUTPUT_CLUSTERS: [GreenPowerProxy.cluster_id],
},
},
}
class Plug_2AC_var05(EnchantedDevice):
"""Immax TS0011F 2 outlet plug."""
quirk_id = TUYA_PLUG_ONOFF
signature = {
MODEL: "TS011F",
ENDPOINTS: {
1: {
# "profile_id": 260,
# "device_type": "0x010a",
# "in_clusters": ["0x0000","0x0003","0x0004","0x0005","0x0006","0x0702","0x0b04","0xe000","0xe001"],
# "out_clusters": ["0x000a","0x0019"]
PROFILE_ID: zha.PROFILE_ID,
DEVICE_TYPE: zha.DeviceType.ON_OFF_PLUG_IN_UNIT,
INPUT_CLUSTERS: [
Basic.cluster_id,
Identify.cluster_id,
Groups.cluster_id,
Scenes.cluster_id,
OnOff.cluster_id,
Metering.cluster_id,
ElectricalMeasurement.cluster_id,
TuyaZBE000Cluster.cluster_id,
TuyaZBExternalSwitchTypeCluster.cluster_id,
],
OUTPUT_CLUSTERS: [Time.cluster_id, Ota.cluster_id],
},
2: {
# "profile_id": 260,
# "device_type": "0x010a",
# "in_clusters": ["0x0004","0x0005","0x0006","0xe001"],
# "out_clusters": []
PROFILE_ID: zha.PROFILE_ID,
DEVICE_TYPE: zha.DeviceType.ON_OFF_PLUG_IN_UNIT,
INPUT_CLUSTERS: [
Groups.cluster_id,
Scenes.cluster_id,
OnOff.cluster_id,
TuyaZBExternalSwitchTypeCluster.cluster_id,
],
OUTPUT_CLUSTERS: [],
},
242: {
# "profile_id": 41440,
# "device_type": "0x0061",
# "in_clusters": [],
# "out_clusters": ["0x0021"]
PROFILE_ID: zgp.PROFILE_ID,
DEVICE_TYPE: zgp.DeviceType.PROXY_BASIC,
INPUT_CLUSTERS: [],
OUTPUT_CLUSTERS: [GreenPowerProxy.cluster_id],
},
},
}
replacement = {
ENDPOINTS: {
1: {
PROFILE_ID: zha.PROFILE_ID,
DEVICE_TYPE: zha.DeviceType.ON_OFF_PLUG_IN_UNIT,
INPUT_CLUSTERS: [
Basic.cluster_id,
Identify.cluster_id,
Groups.cluster_id,
Scenes.cluster_id,
TuyaZBOnOffAttributeCluster,
TuyaZBMeteringCluster,
TuyaZBElectricalMeasurement,
TuyaZBE000Cluster,
TuyaZBExternalSwitchTypeCluster,
],
OUTPUT_CLUSTERS: [Time.cluster_id, Ota.cluster_id],
},
2: {
PROFILE_ID: zha.PROFILE_ID,
DEVICE_TYPE: zha.DeviceType.ON_OFF_PLUG_IN_UNIT,
INPUT_CLUSTERS: [
Groups.cluster_id,
Scenes.cluster_id,
TuyaZBOnOffAttributeCluster,
TuyaZBExternalSwitchTypeCluster,
],
OUTPUT_CLUSTERS: [],
},
242: {
PROFILE_ID: zgp.PROFILE_ID,
DEVICE_TYPE: zgp.DeviceType.PROXY_BASIC,
INPUT_CLUSTERS: [],
OUTPUT_CLUSTERS: [GreenPowerProxy.cluster_id],
},
},
}
class Plug_TZ3000_2AC(CustomDevice):
"""TS0011F 2 outlet plug."""
quirk_id = TUYA_PLUG_ONOFF
signature = {
MODEL: "TS011F",
ENDPOINTS: {
# <SimpleDescriptor endpoint=1 profile=260 device_type=81
# device_version=1
# input_clusters=["0x0000", "0x0004", "0x0005", "0x0006", "0x0702", "0x0b04"]
# output_clusters=["0x000a", "0x0019"]>
1: {
PROFILE_ID: zha.PROFILE_ID,
DEVICE_TYPE: zha.DeviceType.SMART_PLUG,
INPUT_CLUSTERS: [
Basic.cluster_id,
Groups.cluster_id,
Scenes.cluster_id,
OnOff.cluster_id,
Metering.cluster_id,
ElectricalMeasurement.cluster_id,
],
OUTPUT_CLUSTERS: [Time.cluster_id, Ota.cluster_id],
},
# <SimpleDescriptor endpoint=2 profile=260 device_type=81
# device_version=1
# input_clusters=["0x0004", "0x0005", "0x0006", "0x0702", "0x0b04"]
# output_clusters=[]>
2: {
PROFILE_ID: zha.PROFILE_ID,
DEVICE_TYPE: zha.DeviceType.SMART_PLUG,
INPUT_CLUSTERS: [
Groups.cluster_id,
Scenes.cluster_id,
OnOff.cluster_id,
Metering.cluster_id,
ElectricalMeasurement.cluster_id,
],
OUTPUT_CLUSTERS: [],
},
},
}
replacement = {
ENDPOINTS: {
1: {
PROFILE_ID: zha.PROFILE_ID,
DEVICE_TYPE: zha.DeviceType.SMART_PLUG,
INPUT_CLUSTERS: [
Basic.cluster_id,
Groups.cluster_id,
Scenes.cluster_id,
TuyaZBOnOffAttributeCluster,
TuyaZBMeteringCluster,
TuyaZBElectricalMeasurement,
],
OUTPUT_CLUSTERS: [Time.cluster_id, Ota.cluster_id],
},
2: {
PROFILE_ID: zha.PROFILE_ID,
DEVICE_TYPE: zha.DeviceType.SMART_PLUG,
INPUT_CLUSTERS: [
Groups.cluster_id,
Scenes.cluster_id,
TuyaZBOnOffAttributeCluster,
TuyaZBMeteringCluster,
TuyaZBElectricalMeasurement,
],
OUTPUT_CLUSTERS: [],
},
},
}
class Plug_TZ3000_2AC_var02(EnchantedDevice):
"""Tuya 2 socket wall outlet."""
quirk_id = TUYA_PLUG_ONOFF
signature = {
MODEL: "TS011F",
ENDPOINTS: {
1: {
PROFILE_ID: zha.PROFILE_ID,
DEVICE_TYPE: zha.DeviceType.ON_OFF_PLUG_IN_UNIT,
INPUT_CLUSTERS: [
Basic.cluster_id,
Identify.cluster_id,
Groups.cluster_id,
Scenes.cluster_id,
OnOff.cluster_id,
TuyaZBE000Cluster.cluster_id,
TuyaZBExternalSwitchTypeCluster.cluster_id,
],
OUTPUT_CLUSTERS: [Time.cluster_id, Ota.cluster_id],
},
2: {
PROFILE_ID: zha.PROFILE_ID,
DEVICE_TYPE: zha.DeviceType.ON_OFF_PLUG_IN_UNIT,
INPUT_CLUSTERS: [
Groups.cluster_id,
Scenes.cluster_id,
OnOff.cluster_id,
TuyaZBExternalSwitchTypeCluster.cluster_id,
],
OUTPUT_CLUSTERS: [],
},
242: {
PROFILE_ID: zgp.PROFILE_ID,
DEVICE_TYPE: zgp.DeviceType.PROXY_BASIC,
INPUT_CLUSTERS: [],
OUTPUT_CLUSTERS: [GreenPowerProxy.cluster_id],
},
},
}
replacement = {
ENDPOINTS: {
1: {
PROFILE_ID: zha.PROFILE_ID,
DEVICE_TYPE: zha.DeviceType.ON_OFF_PLUG_IN_UNIT,
INPUT_CLUSTERS: [
Basic.cluster_id,
Identify.cluster_id,
Groups.cluster_id,
Scenes.cluster_id,
TuyaZBOnOffAttributeCluster,
TuyaZBE000Cluster,
TuyaZBExternalSwitchTypeCluster,
],
OUTPUT_CLUSTERS: [Time.cluster_id, Ota.cluster_id],
},
2: {
PROFILE_ID: zha.PROFILE_ID,
DEVICE_TYPE: zha.DeviceType.ON_OFF_PLUG_IN_UNIT,
INPUT_CLUSTERS: [
Groups.cluster_id,
Scenes.cluster_id,
TuyaZBOnOffAttributeCluster,
TuyaZBExternalSwitchTypeCluster,
],
OUTPUT_CLUSTERS: [],
},
242: {
PROFILE_ID: zgp.PROFILE_ID,
DEVICE_TYPE: zgp.DeviceType.PROXY_BASIC,
INPUT_CLUSTERS: [],
OUTPUT_CLUSTERS: [GreenPowerProxy.cluster_id],
},
},
}
class Plug_v2(CustomDevice):
"""Another TS011F Tuya plug."""
signature = {
MODEL: "TS011F",
ENDPOINTS: {
# "profile_id": 260,
# "device_type": "0x010a",
# "in_clusters": ["0x0000", "0x0003", "0x0004", "0x0005", "0x0006", "0x0702", "0x0b04", "0xe001"],
# "out_clusters": []
1: {
PROFILE_ID: zha.PROFILE_ID,
DEVICE_TYPE: zha.DeviceType.SMART_PLUG,
INPUT_CLUSTERS: [
Basic.cluster_id,
Identify.cluster_id,
Groups.cluster_id,
Scenes.cluster_id,
OnOff.cluster_id,
Metering.cluster_id,
ElectricalMeasurement.cluster_id,
TuyaZBExternalSwitchTypeCluster.cluster_id,
],
OUTPUT_CLUSTERS: [],
},
},
}
replacement = {
ENDPOINTS: {
1: {
PROFILE_ID: zha.PROFILE_ID,
DEVICE_TYPE: zha.DeviceType.ON_OFF_PLUG_IN_UNIT,
INPUT_CLUSTERS: [
Basic.cluster_id,
Identify.cluster_id,
Groups.cluster_id,
Scenes.cluster_id,
TuyaZBOnOffAttributeCluster,
TuyaZBMeteringCluster,
TuyaZBElectricalMeasurement,
TuyaZBExternalSwitchTypeCluster,
],
OUTPUT_CLUSTERS: [],
},
},
}
Any chance somebody can tell my what I'm doing wrong?
alka79
commented
8 months ago I too was struggling with this plug _TZ3000_okaz9tjs (brand ELIVCO). Your quirk above fixes it. Thank you @TeaMoe :-)
kitor
commented
7 months ago Hi, last week i got some _TZ3000_okaz9tjs Plugs from AliExpress and i also noticed that the current and energy readings are off by 100s. Additionally these plugs identify themselves as lights so that none of the existing quirks match. I solved the issue for me by creating the following quirk, which is essentially just a copy of the
Plug_v2but with an ON_OFF_LIGHT as DeviceType. I'll do a proper pull request later.
This also works fine for me, thanks!
Btw: I noticed there's no OTA cluster on that device. Isn't that weird?
JeromeSi
commented
6 months ago with https://github.com/zigpy/zha-device-handlers/issues/1764#issuecomment-1946842958
I have this issue :
File "/config/custom_zha_quirks/ts011f_plug.py", line 30, in <module> from zhaquirks.tuya import ( ImportError: cannot import name 'EnchantedDevice' from 'zhaquirks.tuya' (/usr/local/lib/python3.11/site-packages/zhaquirks/tuya/__init__.py) 2024-04-21 16:00:25.562 ERROR (bellows.thread_0) [bellows.uart] CRC error in frame b'9cd7c77f21539874f5ded383f47b1ef7eacfd77e' (b'cfd7' != b'68e9')
with https://github.com/zigpy/zha-device-handlers/issues/1764#issuecomment-1272390644
I have this issue :
File "/config/custom_zha_quirks/ts011f_plug.py", line 30, in <module> from zhaquirks.tuya import ( ImportError: cannot import name 'EnchantedDevice' from 'zhaquirks.tuya' (/usr/local/lib/python3.11/site-packages/zhaquirks/tuya/__init__.py) 2024-04-21 15:50:33.896 ERROR (bellows.thread_0) [bellows.uart] CRC error in frame b'9cd3c77f21539874f5de8383f47b1ef0ea3ddc7e' (b'3ddc' != b'9b3b')
I'm a rookie in HA. Maybe I'm make something wrong. I don't know
WeterPeter
commented
1 week ago @jesus51998
Hi, last week i got some _TZ3000_okaz9tjs Plugs from AliExpress and i also noticed that the current and energy readings are off by 100s. Additionally these plugs identify themselves as lights so that none of the existing quirks match. I solved the issue for me by creating the following quirk, which is essentially just a copy of the
Plug_v2but with an ON_OFF_LIGHT as DeviceType. I'll do a proper pull request later.
Ah, this worked for me. I was in the proces returning the plugs but with this quirk not needed! Thanks! 👍🏻
Is your feature request related to a problem? Please describe. After joining the Zigbee plugs, TS011F by _TZ3000_okaz9tjs to ZHA the numbers being pulled are incorrect, yet when using adding the same device using Zigbee2MQTT the Amps show as 2.1A, which is correct and the PolingSmartEnergy is 0
Describe the solution you'd like Fix the numbers.
Diagnostic information
```yaml { "home_assistant": { "installation_type": "Home Assistant OS", "version": "2022.9.4", "dev": false, "hassio": true, "virtualenv": false, "python_version": "3.10.5", "docker": true, "arch": "aarch64", "timezone": "Europe/London", "os_name": "Linux", "os_version": "5.15.61-v8", "supervisor": "2022.08.6", "host_os": "Home Assistant OS 9.0", "docker_version": "20.10.17", "chassis": "embedded", "run_as_root": true }, "custom_components": { "deebot": { "version": "1.4.1", "requirements": [ "deebot-client==1.5.1", "numpy>=1.21.2" ] }, "hildebrandglow_dcc": { "version": "0.6.0", "requirements": [] }, "sonarr_upcoming_media": { "version": "0.2.7", "requirements": [] }, "nodered": { "version": "1.0.9", "requirements": [] }, "anniversaries": { "version": "4.5.0", "requirements": [ "python-dateutil>=2.8.1", "integrationhelper>=0.2.2", "voluptuous>=0.12.1" ] }, "unifigateway": { "version": "0.3.3", "requirements": [ "pyunifi==2.21" ] }, "google_home": { "version": "1.9.15", "requirements": [ "glocaltokens==0.6.8" ] }, "spotcast": { "version": "v3.6.30", "requirements": [ "spotify_token==1.0.0" ] }, "watchman": { "version": "0.5.1", "requirements": [ "prettytable==3.0.0" ] }, "ui_lovelace_minimalist": { "version": "v1.1.3", "requirements": [ "aiofiles==0.8.0", "aiogithubapi>=22.2.4" ] }, "uptime_kuma": { "version": "1.2.1", "requirements": [ "pyuptimekuma==0.0.6" ] }, "mass": { "version": "2022.8.4", "requirements": [ "music-assistant==1.8.7" ] }, "hacs": { "version": "1.27.2", "requirements": [ "aiogithubapi>=22.2.4" ] }, "alarmo": { "version": "v1.9.5", "requirements": [] }, "pyscript": { "version": "1.3.3", "requirements": [ "croniter==1.3.4", "watchdog==2.1.6" ] }, "sonoff": { "version": "3.2.0", "requirements": [ "pycryptodome>=3.6.6" ] }, "huesyncbox": { "version": "1.22.0", "requirements": [ "aiohuesyncbox==0.0.21" ] }, "kodi_media_sensors": { "version": "3.7.0", "requirements": [] } }, "integration_manifest": { "domain": "zha", "name": "Zigbee Home Automation", "config_flow": true, "documentation": "https://www.home-assistant.io/integrations/zha", "requirements": [ "bellows==0.33.1", "pyserial==3.5", "pyserial-asyncio==0.6", "zha-quirks==0.0.79", "zigpy-deconz==0.18.1", "zigpy==0.50.3", "zigpy-xbee==0.15.0", "zigpy-zigate==0.9.2", "zigpy-znp==0.8.2" ], "usb": [ { "vid": "10C4", "pid": "EA60", "description": "*2652*", "known_devices": [ "slae.sh cc2652rb stick" ] }, { "vid": "1A86", "pid": "55D4", "description": "*sonoff*plus*", "known_devices": [ "sonoff zigbee dongle plus v2" ] }, { "vid": "10C4", "pid": "EA60", "description": "*sonoff*plus*", "known_devices": [ "sonoff zigbee dongle plus" ] }, { "vid": "10C4", "pid": "EA60", "description": "*tubeszb*", "known_devices": [ "TubesZB Coordinator" ] }, { "vid": "1A86", "pid": "7523", "description": "*tubeszb*", "known_devices": [ "TubesZB Coordinator" ] }, { "vid": "1A86", "pid": "7523", "description": "*zigstar*", "known_devices": [ "ZigStar Coordinators" ] }, { "vid": "1CF1", "pid": "0030", "description": "*conbee*", "known_devices": [ "Conbee II" ] }, { "vid": "10C4", "pid": "8A2A", "description": "*zigbee*", "known_devices": [ "Nortek HUSBZB-1" ] }, { "vid": "0403", "pid": "6015", "description": "*zigate*", "known_devices": [ "ZiGate+" ] }, { "vid": "10C4", "pid": "EA60", "description": "*zigate*", "known_devices": [ "ZiGate" ] }, { "vid": "10C4", "pid": "8B34", "description": "*bv 2010/10*", "known_devices": [ "Bitron Video AV2010/10" ] } ], "codeowners": [ "@dmulcahey", "@adminiuga", "@puddly" ], "zeroconf": [ { "type": "_esphomelib._tcp.local.", "name": "tube*" }, { "type": "_zigate-zigbee-gateway._tcp.local.", "name": "*zigate*" } ], "dependencies": [ "file_upload" ], "after_dependencies": [ "onboarding", "usb", "zeroconf" ], "iot_class": "local_polling", "loggers": [ "aiosqlite", "bellows", "crccheck", "pure_pcapy3", "zhaquirks", "zigpy", "zigpy_deconz", "zigpy_xbee", "zigpy_zigate", "zigpy_znp" ], "is_built_in": true }, "data": { "ieee": "**REDACTED**", "nwk": 14277, "manufacturer": "_TZ3000_okaz9tjs", "model": "TS011F", "name": "_TZ3000_okaz9tjs TS011F", "quirk_applied": false, "quirk_class": "zigpy.device.Device", "manufacturer_code": 4660, "power_source": "Mains", "lqi": 105, "rssi": null, "last_seen": "2022-09-17T14:52:18", "available": true, "device_type": "Router", "signature": { "node_descriptor": "NodeDescriptor(logical_type=Additional logs
``` Paste any additional debug logs here. Don't remove the extra line breaks outside the ``` marks. ```Additional context Add any other context or screenshots about the feature request here.