Closed familyafriends closed 5 months ago
Please post a full debug log of the restore
Please post a full debug log of the restore
Thank you for your insanely quick replay. Unfortunately, when I am using the "log" tab, the text is too long and cuts of where I started copying. Is it possible to make the rest visible as well?
Also, not sure if relevant: I only changed the USB path in the z2mqtt add on "configuration" tab. Do I also need to do that in the z2mqtt config file? I have just read about that and that is something I didn't do.
zigpy-cli doesn't have any dependency to Z2M and you shouldn't be running Z2M at the same time, as it'll conflict and break things.
You seem to be running it with @tube0013's addon. Maybe there's a way to enable debug logging there. If not, you can install it on any platform and run the commands directly: https://github.com/zigpy/zigpy-cli?tab=readme-ov-file#installation
zigpy-cli doesn't have any dependency to Z2M and you shouldn't be running Z2M at the same time, as it'll conflict and break things.
You seem to be running it with @tube0013's addon. Maybe there's a way to enable debug logging there. If not, you can install it on any platform and run the commands directly: https://github.com/zigpy/zigpy-cli?tab=readme-ov-file#installation
Sorry for being unclear. The file that I posted is independend of z2mqtt and z2mqtt was stopped, when I tried the backup and restore. However, as I do not know what the log is supposed to look like, I tried to give all the information I could give in case it is helpful. In this case my z2mqtt just gets stuck when trying to restart with the conbee3 and I figured there might be a chance that's helpful :)
Anyway, I will try to run the commands directly and report back. I am assuming there should not be any problem if both sticks are plugged in at the same time? Both with extension cords, of course.
I used the link you provided and ran the command in the SSH Web Terminal in HomeAssistant.
When trying to gather information about my Conbee2, I got the following result. It tells me the device is unknown? Is that a possible reason for problems?
I will try the backup/restore command tomorrow anyway. Now I am too tired and the chance for making unnecessary mistakes is too high. I really appreciate your help!
Make sure to run the command with zigpy -vvv deconz
to get verbose output.
The warning just says that an unknown device was spotted on the network during the backup, which is normal, since zigpy-cli doesn't manage your network and doesn't know about any devices on it.
Screenshots first because they are easier readable with the colors. Code comes copied in after.
➜ ~ zigpy radio deconz /dev/ttyACM0 backup deconz-backup.json
2024-03-17 20:09:00.305 a0d7b954-ssh zigpy.application WARNING Unknown device AddrModeAddress(addr_mode=<AddrMode.NWK: 2>, address=0xD9DE)
2024-03-17 20:09:00.316 a0d7b954-ssh zigpy.application WARNING Unknown device AddrModeAddress(addr_mode=<AddrMode.NWK: 2>, address=0xD9DE)
2024-03-17 20:09:00.334 a0d7b954-ssh zigpy.application WARNING Unknown device AddrModeAddress(addr_mode=<AddrMode.NWK: 2>, address=0xD9DE)
➜ ~ zigpy radio --baudrate 115200 deconz /dev/ttyUSB1 restore deconz-backup.json
2024-03-17 20:12:05.694 a0d7b954-ssh zigpy.application WARNING Unknown device AddrModeAddress(addr_mode=<AddrMode.NWK: 2>, address=0x4AE1)
2024-03-17 20:12:05.726 a0d7b954-ssh zigpy.application WARNING Unknown device AddrModeAddress(addr_mode=<AddrMode.NWK: 2>, address=0xF160)
2024-03-17 20:12:05.758 a0d7b954-ssh zigpy.application WARNING Unknown device AddrModeAddress(addr_mode=<AddrMode.NWK: 2>, address=0xB147)
2024-03-17 20:12:05.790 a0d7b954-ssh zigpy.application WARNING Unknown device AddrModeAddress(addr_mode=<AddrMode.NWK: 2>, address=0xCE12)
2024-03-17 20:12:05.822 a0d7b954-ssh zigpy.application WARNING Unknown device AddrModeAddress(addr_mode=<AddrMode.NWK: 2>, address=0x2BB3)
2024-03-17 20:12:05.854 a0d7b954-ssh zigpy.application WARNING Unknown device AddrModeAddress(addr_mode=<AddrMode.NWK: 2>, address=0x4AE1)
2024-03-17 20:12:05.887 a0d7b954-ssh zigpy.application WARNING Unknown device AddrModeAddress(addr_mode=<AddrMode.NWK: 2>, address=0xDB98)
2024-03-17 20:12:05.919 a0d7b954-ssh zigpy.application WARNING Unknown device AddrModeAddress(addr_mode=<AddrMode.NWK: 2>, address=0x7EFD)
2024-03-17 20:12:05.951 a0d7b954-ssh zigpy.application WARNING Unknown device AddrModeAddress(addr_mode=<AddrMode.NWK: 2>, address=0xF160)
2024-03-17 20:12:05.982 a0d7b954-ssh zigpy.application WARNING Unknown device AddrModeAddress(addr_mode=<AddrMode.NWK: 2>, address=0xB147)
2024-03-17 20:12:06.015 a0d7b954-ssh zigpy.application WARNING Unknown device AddrModeAddress(addr_mode=<AddrMode.NWK: 2>, address=0xB147)
2024-03-17 20:12:06.046 a0d7b954-ssh zigpy.application WARNING Unknown device AddrModeAddress(addr_mode=<AddrMode.NWK: 2>, address=0xB147)
2024-03-17 20:12:06.078 a0d7b954-ssh zigpy.application WARNING Unknown device AddrModeAddress(addr_mode=<AddrMode.NWK: 2>, address=0x2BB3)
2024-03-17 20:12:06.110 a0d7b954-ssh asyncio ERROR Task exception was never retrieved
future: <Task finished name='discover_unknown_device_from_packet-nwk=0x4AE1' coro=<ControllerApplication._discover_unknown_device() done, defined at /usr/lib/python3.11/site-packages/zigpy/application.py:950> exception=DeliveryError(
"Failed to enqueue packet: CommandError('<CommandId.aps_data_request: 18>, status: <Status.NO_NETWORK: 6>')")>
Traceback (most recent call last):
File "/usr/lib/python3.11/site-packages/zigpy_deconz/zigbee/application.py", line 508, in send_packet
await self._api.aps_data_request(
File "/usr/lib/python3.11/site-packages/zigpy_deconz/api.py", line 882, in aps_data_request
rsp = await self.send_command(
^^^^^^^^^^^^^^^^^^^^^^^^
File "/usr/lib/python3.11/site-packages/zigpy_deconz/api.py", line 508, in send_command
return await self._command(cmd, **kwargs)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/usr/lib/python3.11/site-packages/zigpy_deconz/api.py", line 589, in _command
return await fut
^^^^^^^^^
zigpy_deconz.exception.CommandError: <CommandId.aps_data_request: 18>, status: <Status.NO_NETWORK: 6>
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib/python3.11/site-packages/zigpy/application.py", line 953, in _discover_unknown_device
return await zigpy.zdo.broadcast(
^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/usr/lib/python3.11/site-packages/zigpy/device.py", line 688, in broadcast
return await app.broadcast(
^^^^^^^^^^^^^^^^^^^^
File "/usr/lib/python3.11/site-packages/zigpy/application.py", line 929, in broadcast
await self.send_packet(
File "/usr/lib/python3.11/site-packages/zigpy_deconz/zigbee/application.py", line 522, in send_packet
raise zigpy.exceptions.DeliveryError(
zigpy.exceptions.DeliveryError: Failed to enqueue packet: CommandError('<CommandId.aps_data_request: 18>, status: <Status.NO_NETWORK: 6>')
2024-03-17 20:12:06.159 a0d7b954-ssh asyncio ERROR Task exception was never retrieved
future: <Task finished name='discover_unknown_device_from_packet-nwk=0xCE12' coro=<ControllerApplication._discover_unknown_device() done, defined at /usr/lib/python3.11/site-packages/zigpy/application.py:950> exception=DeliveryError(
"Failed to enqueue packet: CommandError('<CommandId.aps_data_request: 18>, status: <Status.NO_NETWORK: 6>')")>
Traceback (most recent call last):
File "/usr/lib/python3.11/site-packages/zigpy_deconz/zigbee/application.py", line 508, in send_packet
await self._api.aps_data_request(
File "/usr/lib/python3.11/site-packages/zigpy_deconz/api.py", line 882, in aps_data_request
rsp = await self.send_command(
^^^^^^^^^^^^^^^^^^^^^^^^
File "/usr/lib/python3.11/site-packages/zigpy_deconz/api.py", line 508, in send_command
return await self._command(cmd, **kwargs)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/usr/lib/python3.11/site-packages/zigpy_deconz/api.py", line 589, in _command
return await fut
^^^^^^^^^
zigpy_deconz.exception.CommandError: <CommandId.aps_data_request: 18>, status: <Status.NO_NETWORK: 6>
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib/python3.11/site-packages/zigpy/application.py", line 953, in _discover_unknown_device
return await zigpy.zdo.broadcast(
^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/usr/lib/python3.11/site-packages/zigpy/device.py", line 688, in broadcast
return await app.broadcast(
^^^^^^^^^^^^^^^^^^^^
File "/usr/lib/python3.11/site-packages/zigpy/application.py", line 929, in broadcast
await self.send_packet(
File "/usr/lib/python3.11/site-packages/zigpy_deconz/zigbee/application.py", line 522, in send_packet
raise zigpy.exceptions.DeliveryError(
zigpy.exceptions.DeliveryError: Failed to enqueue packet: CommandError('<CommandId.aps_data_request: 18>, status: <Status.NO_NETWORK: 6>')
2024-03-17 20:12:06.175 a0d7b954-ssh asyncio ERROR Task exception was never retrieved
future: <Task finished name='discover_unknown_device_from_packet-nwk=0x2BB3' coro=<ControllerApplication._discover_unknown_device() done, defined at /usr/lib/python3.11/site-packages/zigpy/application.py:950> exception=DeliveryError(
"Failed to enqueue packet: CommandError('<CommandId.aps_data_request: 18>, status: <Status.NO_NETWORK: 6>')")>
Traceback (most recent call last):
File "/usr/lib/python3.11/site-packages/zigpy_deconz/zigbee/application.py", line 508, in send_packet
await self._api.aps_data_request(
File "/usr/lib/python3.11/site-packages/zigpy_deconz/api.py", line 882, in aps_data_request
rsp = await self.send_command(
^^^^^^^^^^^^^^^^^^^^^^^^
File "/usr/lib/python3.11/site-packages/zigpy_deconz/api.py", line 508, in send_command
return await self._command(cmd, **kwargs)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/usr/lib/python3.11/site-packages/zigpy_deconz/api.py", line 589, in _command
return await fut
^^^^^^^^^
zigpy_deconz.exception.CommandError: <CommandId.aps_data_request: 18>, status: <Status.NO_NETWORK: 6>
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib/python3.11/site-packages/zigpy/application.py", line 953, in _discover_unknown_device
return await zigpy.zdo.broadcast(
^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/usr/lib/python3.11/site-packages/zigpy/device.py", line 688, in broadcast
return await app.broadcast(
^^^^^^^^^^^^^^^^^^^^
File "/usr/lib/python3.11/site-packages/zigpy/application.py", line 929, in broadcast
await self.send_packet(
File "/usr/lib/python3.11/site-packages/zigpy_deconz/zigbee/application.py", line 522, in send_packet
raise zigpy.exceptions.DeliveryError(
zigpy.exceptions.DeliveryError: Failed to enqueue packet: CommandError('<CommandId.aps_data_request: 18>, status: <Status.NO_NETWORK: 6>')
2024-03-17 20:12:06.191 a0d7b954-ssh asyncio ERROR Task exception was never retrieved
future: <Task finished name='discover_unknown_device_from_packet-nwk=0x4AE1' coro=<ControllerApplication._discover_unknown_device() done, defined at /usr/lib/python3.11/site-packages/zigpy/application.py:950> exception=DeliveryError(
"Failed to enqueue packet: CommandError('<CommandId.aps_data_request: 18>, status: <Status.NO_NETWORK: 6>')")>
Traceback (most recent call last):
File "/usr/lib/python3.11/site-packages/zigpy_deconz/zigbee/application.py", line 508, in send_packet
await self._api.aps_data_request(
File "/usr/lib/python3.11/site-packages/zigpy_deconz/api.py", line 882, in aps_data_request
rsp = await self.send_command(
^^^^^^^^^^^^^^^^^^^^^^^^
File "/usr/lib/python3.11/site-packages/zigpy_deconz/api.py", line 508, in send_command
return await self._command(cmd, **kwargs)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/usr/lib/python3.11/site-packages/zigpy_deconz/api.py", line 589, in _command
return await fut
^^^^^^^^^
zigpy_deconz.exception.CommandError: <CommandId.aps_data_request: 18>, status: <Status.NO_NETWORK: 6>
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib/python3.11/site-packages/zigpy/application.py", line 953, in _discover_unknown_device
return await zigpy.zdo.broadcast(
^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/usr/lib/python3.11/site-packages/zigpy/device.py", line 688, in broadcast
return await app.broadcast(
^^^^^^^^^^^^^^^^^^^^
File "/usr/lib/python3.11/site-packages/zigpy/application.py", line 929, in broadcast
await self.send_packet(
File "/usr/lib/python3.11/site-packages/zigpy_deconz/zigbee/application.py", line 522, in send_packet
raise zigpy.exceptions.DeliveryError(
zigpy.exceptions.DeliveryError: Failed to enqueue packet: CommandError('<CommandId.aps_data_request: 18>, status: <Status.NO_NETWORK: 6>')
2024-03-17 20:12:06.207 a0d7b954-ssh asyncio ERROR Task exception was never retrieved
future: <Task finished name='discover_unknown_device_from_packet-nwk=0xDB98' coro=<ControllerApplication._discover_unknown_device() done, defined at /usr/lib/python3.11/site-packages/zigpy/application.py:950> exception=DeliveryError(
"Failed to enqueue packet: CommandError('<CommandId.aps_data_request: 18>, status: <Status.NO_NETWORK: 6>')")>
Traceback (most recent call last):
File "/usr/lib/python3.11/site-packages/zigpy_deconz/zigbee/application.py", line 508, in send_packet
await self._api.aps_data_request(
File "/usr/lib/python3.11/site-packages/zigpy_deconz/api.py", line 882, in aps_data_request
rsp = await self.send_command(
^^^^^^^^^^^^^^^^^^^^^^^^
File "/usr/lib/python3.11/site-packages/zigpy_deconz/api.py", line 508, in send_command
return await self._command(cmd, **kwargs)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/usr/lib/python3.11/site-packages/zigpy_deconz/api.py", line 589, in _command
return await fut
^^^^^^^^^
zigpy_deconz.exception.CommandError: <CommandId.aps_data_request: 18>, status: <Status.NO_NETWORK: 6>
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib/python3.11/site-packages/zigpy/application.py", line 953, in _discover_unknown_device
return await zigpy.zdo.broadcast(
^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/usr/lib/python3.11/site-packages/zigpy/device.py", line 688, in broadcast
return await app.broadcast(
^^^^^^^^^^^^^^^^^^^^
File "/usr/lib/python3.11/site-packages/zigpy/application.py", line 929, in broadcast
await self.send_packet(
File "/usr/lib/python3.11/site-packages/zigpy_deconz/zigbee/application.py", line 522, in send_packet
raise zigpy.exceptions.DeliveryError(
zigpy.exceptions.DeliveryError: Failed to enqueue packet: CommandError('<CommandId.aps_data_request: 18>, status: <Status.NO_NETWORK: 6>')
2024-03-17 20:12:06.191 a0d7b954-ssh asyncio ERROR Task exception was never retrieved
future: <Task finished name='discover_unknown_device_from_packet-nwk=0x4AE1' coro=<ControllerApplication._discover_unknown_device() done, defined at /usr/lib/python3.11/site-packages/zigpy/application.py:950> exception=DeliveryError(
"Failed to enqueue packet: CommandError('<CommandId.aps_data_request: 18>, status: <Status.NO_NETWORK: 6>')")>
Traceback (most recent call last):
File "/usr/lib/python3.11/site-packages/zigpy_deconz/zigbee/application.py", line 508, in send_packet
await self._api.aps_data_request(
File "/usr/lib/python3.11/site-packages/zigpy_deconz/api.py", line 882, in aps_data_request
rsp = await self.send_command(
^^^^^^^^^^^^^^^^^^^^^^^^
File "/usr/lib/python3.11/site-packages/zigpy_deconz/api.py", line 508, in send_command
return await self._command(cmd, **kwargs)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/usr/lib/python3.11/site-packages/zigpy_deconz/api.py", line 589, in _command
return await fut
^^^^^^^^^
zigpy_deconz.exception.CommandError: <CommandId.aps_data_request: 18>, status: <Status.NO_NETWORK: 6>
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib/python3.11/site-packages/zigpy/application.py", line 953, in _discover_unknown_device
return await zigpy.zdo.broadcast(
^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/usr/lib/python3.11/site-packages/zigpy/device.py", line 688, in broadcast
return await app.broadcast(
^^^^^^^^^^^^^^^^^^^^
File "/usr/lib/python3.11/site-packages/zigpy/application.py", line 929, in broadcast
await self.send_packet(
File "/usr/lib/python3.11/site-packages/zigpy_deconz/zigbee/application.py", line 522, in send_packet
raise zigpy.exceptions.DeliveryError(
zigpy.exceptions.DeliveryError: Failed to enqueue packet: CommandError('<CommandId.aps_data_request: 18>, status: <Status.NO_NETWORK: 6>')
2024-03-17 20:12:06.207 a0d7b954-ssh asyncio ERROR Task exception was never retrieved
future: <Task finished name='discover_unknown_device_from_packet-nwk=0xDB98' coro=<ControllerApplication._discover_unknown_device() done, defined at /usr/lib/python3.11/site-packages/zigpy/application.py:950> exception=DeliveryError(
"Failed to enqueue packet: CommandError('<CommandId.aps_data_request: 18>, status: <Status.NO_NETWORK: 6>')")>
Traceback (most recent call last):
File "/usr/lib/python3.11/site-packages/zigpy_deconz/zigbee/application.py", line 508, in send_packet
await self._api.aps_data_request(
File "/usr/lib/python3.11/site-packages/zigpy_deconz/api.py", line 882, in aps_data_request
rsp = await self.send_command(
^^^^^^^^^^^^^^^^^^^^^^^^
File "/usr/lib/python3.11/site-packages/zigpy_deconz/api.py", line 508, in send_command
return await self._command(cmd, **kwargs)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/usr/lib/python3.11/site-packages/zigpy_deconz/api.py", line 589, in _command
return await fut
^^^^^^^^^
zigpy_deconz.exception.CommandError: <CommandId.aps_data_request: 18>, status: <Status.NO_NETWORK: 6>
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib/python3.11/site-packages/zigpy/application.py", line 953, in _discover_unknown_device
return await zigpy.zdo.broadcast(
^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/usr/lib/python3.11/site-packages/zigpy/device.py", line 688, in broadcast
return await app.broadcast(
^^^^^^^^^^^^^^^^^^^^
File "/usr/lib/python3.11/site-packages/zigpy/application.py", line 929, in broadcast
await self.send_packet(
File "/usr/lib/python3.11/site-packages/zigpy_deconz/zigbee/application.py", line 522, in send_packet
raise zigpy.exceptions.DeliveryError(
zigpy.exceptions.DeliveryError: Failed to enqueue packet: CommandError('<CommandId.aps_data_request: 18>, status: <Status.NO_NETWORK: 6>')
2024-03-17 20:12:06.222 a0d7b954-ssh asyncio ERROR Task exception was never retrieved
future: <Task finished name='discover_unknown_device_from_packet-nwk=0x7EFD' coro=<ControllerApplication._discover_unknown_device() done, defined at /usr/lib/python3.11/site-packages/zigpy/application.py:950> exception=DeliveryError("Failed to enqueue packet: CommandError('<CommandId.aps_data_request: 18>, status: <Status.NO_NETWORK: 6>')")>
Traceback (most recent call last):
File "/usr/lib/python3.11/site-packages/zigpy_deconz/zigbee/application.py", line 508, in send_packet
await self._api.aps_data_request(
File "/usr/lib/python3.11/site-packages/zigpy_deconz/api.py", line 882, in aps_data_request
rsp = await self.send_command(
^^^^^^^^^^^^^^^^^^^^^^^^
File "/usr/lib/python3.11/site-packages/zigpy_deconz/api.py", line 508, in send_command
return await self._command(cmd, **kwargs)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/usr/lib/python3.11/site-packages/zigpy_deconz/api.py", line 589, in _command
return await fut
^^^^^^^^^
zigpy_deconz.exception.CommandError: <CommandId.aps_data_request: 18>, status: <Status.NO_NETWORK: 6>
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib/python3.11/site-packages/zigpy/application.py", line 953, in _discover_unknown_device
return await zigpy.zdo.broadcast(
^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/usr/lib/python3.11/site-packages/zigpy/device.py", line 688, in broadcast
return await app.broadcast(
^^^^^^^^^^^^^^^^^^^^
File "/usr/lib/python3.11/site-packages/zigpy/application.py", line 929, in broadcast
await self.send_packet(
File "/usr/lib/python3.11/site-packages/zigpy_deconz/zigbee/application.py", line 522, in send_packet
raise zigpy.exceptions.DeliveryError(
zigpy.exceptions.DeliveryError: Failed to enqueue packet: CommandError('<CommandId.aps_data_request: 18>, status: <Status.NO_NETWORK: 6>')
2024-03-17 20:12:06.222 a0d7b954-ssh asyncio ERROR Task exception was never retrieved
future: <Task finished name='discover_unknown_device_from_packet-nwk=0x7EFD' coro=<ControllerApplication._discover_unknown_device() done, defined at /usr/lib/python3.11/site-packages/zigpy/application.py:950> exception=DeliveryError("Failed to enqueue packet: CommandError('<CommandId.aps_data_request: 18>, status: <Status.NO_NETWORK: 6>')")>
Traceback (most recent call last):
File "/usr/lib/python3.11/site-packages/zigpy_deconz/zigbee/application.py", line 508, in send_packet
await self._api.aps_data_request(
File "/usr/lib/python3.11/site-packages/zigpy_deconz/api.py", line 882, in aps_data_request
rsp = await self.send_command(
^^^^^^^^^^^^^^^^^^^^^^^^
File "/usr/lib/python3.11/site-packages/zigpy_deconz/api.py", line 508, in send_command
return await self._command(cmd, **kwargs)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/usr/lib/python3.11/site-packages/zigpy_deconz/api.py", line 589, in _command
return await fut
^^^^^^^^^
zigpy_deconz.exception.CommandError: <CommandId.aps_data_request: 18>, status: <Status.NO_NETWORK: 6>
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib/python3.11/site-packages/zigpy/application.py", line 953, in _discover_unknown_device
return await zigpy.zdo.broadcast(
^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/usr/lib/python3.11/site-packages/zigpy/device.py", line 688, in broadcast
return await app.broadcast(
^^^^^^^^^^^^^^^^^^^^
File "/usr/lib/python3.11/site-packages/zigpy/application.py", line 929, in broadcast
await self.send_packet(
File "/usr/lib/python3.11/site-packages/zigpy_deconz/zigbee/application.py", line 522, in send_packet
raise zigpy.exceptions.DeliveryError(
zigpy.exceptions.DeliveryError: Failed to enqueue packet: CommandError('<CommandId.aps_data_request: 18>, status: <Status.NO_NETWORK: 6>')
2024-03-17 20:12:09.183 a0d7b954-ssh zigpy.application WARNING Unknown device AddrModeAddress(addr_mode=<AddrMode.NWK: 2>, address=0xDB98)
2024-03-17 20:12:09.230 a0d7b954-ssh zigpy.application WARNING Unknown device AddrModeAddress(addr_mode=<AddrMode.NWK: 2>, address=0x7EFD)
Please run it with zigpy -vvv deconz
instead of just zigpy deconz
. The -vvv
flags include verbose output.
As for copying text, this is mentioned in the documentation for the addon: https://github.com/home-assistant/addons/blob/master/ssh/DOCS.md#the-web-terminal
Oh, sorry. I figured the -vvv tip was just for the "info" part 🙈 With shift I can only copy the content of the page visible. I cannot scroll within the window. With a log this long, this gets kinda complicated. I pieced it together based on copied pieces. Hope this helps!
➜ ~ zigpy -vvv radio --baudrate 115200 deconz /dev/ttyUSB1 restore deconz-backup.json
2024-03-17 20:46:55.443 a0d7b954-ssh asyncio DEBUG Using selector: EpollSelector
2024-03-17 20:46:55.453 a0d7b954-ssh zigpy.ota DEBUG Registering new OTA provider: <zigpy.ota.providers.Inovelli object at 0x7f36d91333d0>
2024-03-17 20:46:55.454 a0d7b954-ssh zigpy.ota DEBUG Registering new OTA provider: <zigpy.ota.providers.Ledvance object at 0x7f36d9935f10>
2024-03-17 20:46:55.454 a0d7b954-ssh zigpy.ota DEBUG Registering new OTA provider: <zigpy.ota.providers.Salus object at 0x7f36d9104c50>
2024-03-17 20:46:55.454 a0d7b954-ssh zigpy.ota DEBUG Registering new OTA provider: <zigpy.ota.providers.Sonoff object at 0x7f36d912bc10>
2024-03-17 20:46:55.454 a0d7b954-ssh zigpy.ota DEBUG Registering new OTA provider: <zigpy.ota.providers.ThirdReality object at 0x7f36d912bad0>
2024-03-17 20:46:55.456 a0d7b954-ssh zigpy_deconz.uart DEBUG Connecting to /dev/ttyUSB1
2024-03-17 20:46:55.456 a0d7b954-ssh zigpy.serial DEBUG Opening a serial connection to '/dev/ttyUSB1' (115200 baudrate)
2024-03-17 20:46:55.457 a0d7b954-ssh zigpy_deconz.uart DEBUG Connection made
2024-03-17 20:46:55.457 a0d7b954-ssh zigpy_deconz.uart DEBUG Connected to /dev/ttyUSB1
2024-03-17 20:46:55.457 a0d7b954-ssh zigpy_deconz.api DEBUG Sending CommandId.read_parameter{'parameter_id': <NetworkParameter.protocol_version: 34>, 'parameter': b''} (seq=1)
2024-03-17 20:46:55.458 a0d7b954-ssh zigpy_deconz.uart DEBUG Send: 0a01000800010022
2024-03-17 20:46:55.472 a0d7b954-ssh zigpy_deconz.uart DEBUG Frame received: 0x0a01000a000300220c01
2024-03-17 20:46:55.473 a0d7b954-ssh zigpy_deconz.api DEBUG Received command CommandId.read_parameter{'status': <Status.SUCCESS: 0>, 'frame_length': 10, 'payload_length': 3, 'parameter_id': <NetworkParameter.protocol_version: 34>, 'parameter': b'\x0c\x01'} (seq 1)
2024-03-17 20:46:55.473 a0d7b954-ssh zigpy_deconz.api DEBUG Read parameter protocol_version(None)=268
2024-03-17 20:46:55.473 a0d7b954-ssh zigpy_deconz.api DEBUG Sending CommandId.version{'reserved': 0} (seq=2)
2024-03-17 20:46:55.473 a0d7b954-ssh zigpy_deconz.uart DEBUG Send: 0d0200090000000000
2024-03-17 20:46:55.489 a0d7b954-ssh zigpy_deconz.uart DEBUG Frame received: 0x0d0200090000095026
2024-03-17 20:46:55.490 a0d7b954-ssh zigpy_deconz.api DEBUG Received command CommandId.version{'status': <Status.SUCCESS: 0>, 'frame_length': 9, 'version': FirmwareVersion<0x26500900>(reserved=0, platform=<FirmwarePlatform.Conbee_III: 9>, minor=80, major=38)} (seq 2)
2024-03-17 20:46:55.490 a0d7b954-ssh zigpy_deconz.api DEBUG Sending CommandId.device_state{} (seq=3)
2024-03-17 20:46:55.491 a0d7b954-ssh zigpy_deconz.uart DEBUG Send: 0703000800000000
2024-03-17 20:46:55.504 a0d7b954-ssh zigpy_deconz.uart DEBUG Frame received: 0x07030008002e0000
2024-03-17 20:46:55.505 a0d7b954-ssh zigpy_deconz.api DEBUG Received command CommandId.device_state{'status': <Status.SUCCESS: 0>, 'frame_length': 8, 'device_state': DeviceState(network_state=<NetworkState2.CONNECTED: 2>, device_state=<DeviceStateFlags.APSDE_DATA_CONFIRM|APSDE_DATA_INDICATION|APSDE_DATA_REQUEST_FREE_SLOTS_AVAILABLE: 11>), 'reserved1': 0, 'reserved2': 0} (seq 3)
2024-03-17 20:46:55.506 a0d7b954-ssh zigpy.backups DEBUG Restoring backup NetworkBackup(version=1, backup_time=datetime.datetime(2024, 3, 17, 19, 9, 0, 448914, tzinfo=datetime.timezone.utc), network_info=NetworkInfo(extended_pan_id=dd:dd:dd:dd:dd:dd:dd:dd, pan_id=0x1A62, nwk_update_id=0, nwk_manager_id=0x0000, channel=11, channel_mask=<Channels.CHANNEL_11: 2048>, security_level=5, network_key=Key(key=01:03:05:07:09:0b:0d:0f:00
:02:04:06:08:0a:0c:0d, tx_counter=12169055, rx_counter=0, seq=0, partner_ieee=ff:ff:ff:ff:ff:ff:ff:ff), tc_link_key=Key(key=5a:69:67:42:65:65:41:6c:6c:69:61:6e:63:65:30:39, tx_counter=0, rx_counter=0, seq=0, partner_ieee=00:21:2e:ff:ff:09:3c:78), key_table=[], children=[], nwk_addresses={}, stack_specific={}, metadata={'deconz': {'version': '0x26720700'}}, source='zigpy-deconz@0.23.1'), node_info=NodeInfo(nwk=0x0000, ieee=00:2
1:2e:ff:ff:09:3c:78, logical_type=<LogicalType.Coordinator: 0>, model='Raspbee II', manufacturer='dresden elektronik', version='0x26720700'))
2024-03-17 20:46:55.507 a0d7b954-ssh zigpy_deconz.api DEBUG Sending CommandId.write_parameter{'parameter_id': <NetworkParameter.nwk_frame_counter: 39>, 'parameter': b'\xe7\xc2\xb9\x00'} (seq=4)
2024-03-17 20:46:55.508 a0d7b954-ssh zigpy_deconz.uart DEBUG Send: 0b04000c00050027e7c2b900
2024-03-17 20:46:55.521 a0d7b954-ssh zigpy_deconz.uart DEBUG Frame received: 0x0b04000800010027
2024-03-17 20:46:55.522 a0d7b954-ssh zigpy_deconz.api DEBUG Received command CommandId.write_parameter{'status': <Status.SUCCESS: 0>, 'frame_length': 8, 'payload_length': 1, 'parameter_id': <NetworkParameter.nwk_frame_counter: 39>} (seq 4)
2024-03-17 20:46:55.523 a0d7b954-ssh zigpy_deconz.api DEBUG Sending CommandId.aps_data_indication{'flags': <DataIndicationFlags.Always_Use_NWK_Source_Addr: 1>} (seq=5)
2024-03-17 20:46:55.523 a0d7b954-ssh zigpy_deconz.uart DEBUG Send: 1705000800010001
2024-03-17 20:46:55.537 a0d7b954-ssh zigpy_deconz.uart DEBUG Frame received: 0x1705002a0023002e0200000102b32b0b040119000c00016f01004f121514013001190000b900000000b9
2024-03-17 20:46:55.538 a0d7b954-ssh zigpy_deconz.api DEBUG Received command CommandId.aps_data_indication{'status': <Status.SUCCESS: 0>, 'frame_length': 42, 'payload_length': 35, 'device_state': DeviceState(network_state=<NetworkState2.CONNECTED: 2>, device_state=<DeviceStateFlags.APSDE_DATA_CONFIRM|APSDE_DATA_INDICATION|APSDE_DATA_REQUEST_FREE_SLOTS_AVAILABLE: 11>), 'dst_addr': DeconzAddress(address_mode=<AddressMode.NWK: 2>
, address=0x0000), 'dst_ep': 1, 'src_addr': DeconzAddress(address_mode=<AddressMode.NWK: 2>, address=0x2BB3), 'src_ep': 11, 'profile_id': 260, 'cluster_id': 25, 'asdu': b'\x01o\x01\x00O\x12\x15\x14\x010\x01\x19', 'reserved1': 0, 'reserved2': 0, 'lqi': 185, 'reserved3': 0, 'reserved4': 0, 'reserved5': 0, 'reserved6': 0, 'rssi': -71} (seq 5)
2024-03-17 20:46:55.540 a0d7b954-ssh zigpy.application DEBUG Received a packet: ZigbeePacket(timestamp=datetime.datetime(2024, 3, 17, 19, 46, 55, 540064, tzinfo=datetime.timezone.utc), src=AddrModeAddress(addr_mode=<AddrMode.NWK: 2>, address=0x2BB3), src_ep=11, dst=AddrModeAddress(addr_mode=<AddrMode.NWK: 2>, address=0x0000), dst_ep=1, source_route=None, extended_timeout=False, tsn=None, profile_id=260, cluster_id=25, data=Ser
ialized[b'\x01o\x01\x00O\x12\x15\x14\x010\x01\x19'], tx_options=<TransmitOptions.NONE: 0>, radius=0, non_member_radius=0, lqi=185, rssi=-71)
2024-03-17 20:46:55.540 a0d7b954-ssh zigpy.application WARNING Unknown device AddrModeAddress(addr_mode=<AddrMode.NWK: 2>, address=0x2BB3)
2024-03-17 20:46:55.542 a0d7b954-ssh zigpy_deconz.api DEBUG Sending CommandId.write_parameter{'parameter_id': <NetworkParameter.aps_designed_coordinator: 9>, 'parameter': b'\x01'} (seq=6)
2024-03-17 20:46:55.543 a0d7b954-ssh zigpy_deconz.uart DEBUG Send: 0b0600090002000901
2024-03-17 20:46:55.544 a0d7b954-ssh zigpy_deconz.zigbee.application DEBUG Sending packet: ZigbeePacket(timestamp=datetime.datetime(2024, 3, 17, 19, 46, 55, 544134, tzinfo=datetime.timezone.utc), src=AddrModeAddress(addr_mode=<AddrMode.NWK: 2>, address=0xFFFE), src_ep=0, dst=AddrModeAddress(addr_mode=<AddrMode.Broadcast: 15>, address=<BroadcastAddress.RX_ON_WHEN_IDLE: 65533>), dst_ep=0, source_route=None, extended_timeout=Fals
e, tsn=1, profile_id=0, cluster_id=<ZDOCmd.IEEE_addr_req: 0x0001>, data=Serialized[b'\x01\xb3+\x00\x00'], tx_options=<TransmitOptions.NONE: 0>, radius=0, non_member_radius=0, lqi=None, rssi=None)
2024-03-17 20:46:55.552 a0d7b954-ssh zigpy_deconz.uart DEBUG Frame received: 0x0b06000800010009
2024-03-17 20:46:55.553 a0d7b954-ssh zigpy_deconz.api DEBUG Received command CommandId.write_parameter{'status': <Status.SUCCESS: 0>, 'frame_length': 8, 'payload_length': 1, 'parameter_id': <NetworkParameter.aps_designed_coordinator: 9>} (seq 6)
2024-03-17 20:46:55.554 a0d7b954-ssh zigpy_deconz.api DEBUG Sending CommandId.aps_data_confirm{} (seq=7)
2024-03-17 20:46:55.555 a0d7b954-ssh zigpy_deconz.uart DEBUG Send: 04070007000000
2024-03-17 20:46:55.568 a0d7b954-ssh zigpy_deconz.uart DEBUG Frame received: 0x04070013000c002e1402fdff00000000000000
2024-03-17 20:46:55.570 a0d7b954-ssh zigpy_deconz.api DEBUG Received command CommandId.aps_data_confirm{'status': <Status.SUCCESS: 0>, 'frame_length': 19, 'payload_length': 12, 'device_state': DeviceState(network_state=<NetworkState2.CONNECTED: 2>, device_state=<DeviceStateFlags.APSDE_DATA_CONFIRM|APSDE_DATA_INDICATION|APSDE_DATA_REQUEST_FREE_SLOTS_AVAILABLE: 11>), 'request_id': 20, 'dst_addr': DeconzAddressEndpoint(address_mo
de=<AddressMode.NWK: 2>, address=0xFFFD, endpoint=0), 'src_ep': 0, 'confirm_status': <TXStatus.SUCCESS: 0>, 'reserved1': 0, 'reserved2': 0, 'reserved3': 0, 'reserved4': 0} (seq 7)
2024-03-17 20:46:55.571 a0d7b954-ssh zigpy_deconz.zigbee.application WARNING Unexpected transmit confirm for request id 20, Status: TXStatus.SUCCESS
2024-03-17 20:46:55.572 a0d7b954-ssh zigpy_deconz.api DEBUG Sending CommandId.write_parameter{'parameter_id': <NetworkParameter.nwk_address: 7>, 'parameter': b'\x00\x00'} (seq=8)
2024-03-17 20:46:55.572 a0d7b954-ssh zigpy_deconz.uart DEBUG Send: 0b08000a000300070000
2024-03-17 20:46:55.584 a0d7b954-ssh zigpy_deconz.uart DEBUG Frame received: 0x0b08000800010007
2024-03-17 20:46:55.585 a0d7b954-ssh zigpy_deconz.api DEBUG Received command CommandId.write_parameter{'status': <Status.SUCCESS: 0>, 'frame_length': 8, 'payload_length': 1, 'parameter_id': <NetworkParameter.nwk_address: 7>} (seq 8)
2024-03-17 20:46:55.586 a0d7b954-ssh zigpy_deconz.api DEBUG Sending CommandId.aps_data_indication{'flags': <DataIndicationFlags.Always_Use_NWK_Source_Addr: 1>} (seq=9)
2024-03-17 20:46:55.587 a0d7b954-ssh zigpy_deconz.uart DEBUG Send: 1709000800010001
2024-03-17 20:46:55.601 a0d7b954-ssh zigpy_deconz.uart DEBUG Frame received: 0x1709002a0023002e020000010298db0b040119000c00016901004f121514013001190000c100000000c1
2024-03-17 20:46:55.602 a0d7b954-ssh zigpy_deconz.api DEBUG Received command CommandId.aps_data_indication{'status': <Status.SUCCESS: 0>, 'frame_length': 42, 'payload_length': 35, 'device_state': DeviceState(network_state=<NetworkState2.CONNECTED: 2>, device_state=<DeviceStateFlags.APSDE_DATA_CONFIRM|APSDE_DATA_INDICATION|APSDE_DATA_REQUEST_FREE_SLOTS_AVAILABLE: 11>), 'dst_addr': DeconzAddress(address_mode=<AddressMode.NWK: 2>
, address=0x0000), 'dst_ep': 1, 'src_addr': DeconzAddress(address_mode=<AddressMode.NWK: 2>, address=0xDB98), 'src_ep': 11, 'profile_id': 260, 'cluster_id': 25, 'asdu': b'\x01i\x01\x00O\x12\x15\x14\x010\x01\x19', 'reserved1': 0, 'reserved2': 0, 'lqi': 193, 'reserved3': 0, 'reserved4': 0, 'reserved5': 0, 'reserved6': 0, 'rssi': -63} (seq 9)
2024-03-17 20:46:55.603 a0d7b954-ssh zigpy.application DEBUG Received a packet: ZigbeePacket(timestamp=datetime.datetime(2024, 3, 17, 19, 46, 55, 603876, tzinfo=datetime.timezone.utc), src=AddrModeAddress(addr_mode=<AddrMode.NWK: 2>, address=0xDB98), src_ep=11, dst=AddrModeAddress(addr_mode=<AddrMode.NWK: 2>, address=0x0000), dst_ep=1, source_route=None, extended_timeout=False, tsn=None, profile_id=260, cluster_id=25, data=Ser
ialized[b'\x01i\x01\x00O\x12\x15\x14\x010\x01\x19'], tx_options=<TransmitOptions.NONE: 0>, radius=0, non_member_radius=0, lqi=193, rssi=-63)
2024-03-17 20:46:55.604 a0d7b954-ssh zigpy.application WARNING Unknown device AddrModeAddress(addr_mode=<AddrMode.NWK: 2>, address=0xDB98)
2024-03-17 20:46:55.605 a0d7b954-ssh zigpy_deconz.api DEBUG Sending CommandId.write_parameter{'parameter_id': <NetworkParameter.mac_address: 1>, 'parameter': b'x<\t\xff\xff.!\x00'} (seq=10)
2024-03-17 20:46:55.606 a0d7b954-ssh zigpy_deconz.uart DEBUG Send: 0b0a001000090001783c09ffff2e2100
2024-03-17 20:46:55.607 a0d7b954-ssh zigpy_deconz.zigbee.application DEBUG Sending packet: ZigbeePacket(timestamp=datetime.datetime(2024, 3, 17, 19, 46, 55, 606988, tzinfo=datetime.timezone.utc), src=AddrModeAddress(addr_mode=<AddrMode.NWK: 2>, address=0xFFFE), src_ep=0, dst=AddrModeAddress(addr_mode=<AddrMode.Broadcast: 15>, address=<BroadcastAddress.RX_ON_WHEN_IDLE: 65533>), dst_ep=0, source_route=None, extended_timeout=Fals
e, tsn=3, profile_id=0, cluster_id=<ZDOCmd.IEEE_addr_req: 0x0001>, data=Serialized[b'\x03\x98\xdb\x00\x00'], tx_options=<TransmitOptions.NONE: 0>, radius=0, non_member_radius=0, lqi=None, rssi=None)
2024-03-17 20:46:55.616 a0d7b954-ssh zigpy_deconz.uart DEBUG Frame received: 0x0b0a000800010001
2024-03-17 20:46:55.617 a0d7b954-ssh zigpy_deconz.api DEBUG Received command CommandId.write_parameter{'status': <Status.SUCCESS: 0>, 'frame_length': 8, 'payload_length': 1, 'parameter_id': <NetworkParameter.mac_address: 1>} (seq 10)
2024-03-17 20:46:55.618 a0d7b954-ssh zigpy_deconz.api DEBUG Sending CommandId.aps_data_confirm{} (seq=11)
2024-03-17 20:46:55.619 a0d7b954-ssh zigpy_deconz.uart DEBUG Send: 040b0007000000
2024-03-17 20:46:55.633 a0d7b954-ssh zigpy_deconz.uart DEBUG Frame received: 0x040b0013000c002e1502fdff00000000000000
2024-03-17 20:46:55.634 a0d7b954-ssh zigpy_deconz.api DEBUG Received command CommandId.aps_data_confirm{'status': <Status.SUCCESS: 0>, 'frame_length': 19, 'payload_length': 12, 'device_state': DeviceState(network_state=<NetworkState2.CONNECTED: 2>, device_state=<DeviceStateFlags.APSDE_DATA_CONFIRM|APSDE_DATA_INDICATION|APSDE_DATA_REQUEST_FREE_SLOTS_AVAILABLE: 11>), 'request_id': 21, 'dst_addr': DeconzAddressEndpoint(address_mo
de=<AddressMode.NWK: 2>, address=0xFFFD, endpoint=0), 'src_ep': 0, 'confirm_status': <TXStatus.SUCCESS: 0>, 'reserved1': 0, 'reserved2': 0, 'reserved3': 0, 'reserved4': 0} (seq 11)
2024-03-17 20:46:55.635 a0d7b954-ssh zigpy_deconz.zigbee.application WARNING Unexpected transmit confirm for request id 21, Status: TXStatus.SUCCESS
2024-03-17 20:46:55.636 a0d7b954-ssh zigpy_deconz.api DEBUG Sending CommandId.write_parameter{'parameter_id': <NetworkParameter.channel_mask: 10>, 'parameter': b'\x00\x08\x00\x00'} (seq=12)
2024-03-17 20:46:55.636 a0d7b954-ssh zigpy_deconz.uart DEBUG Send: 0b0c000c0005000a00080000
2024-03-17 20:46:55.648 a0d7b954-ssh zigpy_deconz.uart DEBUG Frame received: 0x0b0c00080001000a
2024-03-17 20:46:55.649 a0d7b954-ssh zigpy_deconz.api DEBUG Received command CommandId.write_parameter{'status': <Status.SUCCESS: 0>, 'frame_length': 8, 'payload_length': 1, 'parameter_id': <NetworkParameter.channel_mask: 10>} (seq 12)
2024-03-17 20:46:55.650 a0d7b954-ssh zigpy_deconz.api DEBUG Sending CommandId.aps_data_indication{'flags': <DataIndicationFlags.Always_Use_NWK_Source_Addr: 1>} (seq=13)
2024-03-17 20:46:55.651 a0d7b954-ssh zigpy_deconz.uart DEBUG Send: 170d000800010001
2024-03-17 20:46:55.664 a0d7b954-ssh zigpy_deconz.uart DEBUG Frame received: 0x170d002a0023002e0200000102365f0b040119000c0001c101000b1014010a1f00010000c300000000c3
2024-03-17 20:46:55.666 a0d7b954-ssh zigpy_deconz.api DEBUG Received command CommandId.aps_data_indication{'status': <Status.SUCCESS: 0>, 'frame_length': 42, 'payload_length': 35, 'device_state': DeviceState(network_state=<NetworkState2.CONNECTED: 2>, device_state=<DeviceStateFlags.APSDE_DATA_CONFIRM|APSDE_DATA_INDICATION|APSDE_DATA_REQUEST_FREE_SLOTS_AVAILABLE: 11>), 'dst_addr': DeconzAddress(address_mode=<AddressMode.NWK: 2>
, address=0x0000), 'dst_ep': 1, 'src_addr': DeconzAddress(address_mode=<AddressMode.NWK: 2>, address=0x5F36), 'src_ep': 11, 'profile_id': 260, 'cluster_id': 25, 'asdu': b'\x01\xc1\x01\x00\x0b\x10\x14\x01\n\x1f\x00\x01', 'reserved1': 0, 'reserved2': 0, 'lqi': 195, 'reserved3': 0, 'reserved4': 0, 'reserved5': 0, 'reserved6': 0, 'rssi': -61} (seq 13)
2024-03-17 20:46:55.667 a0d7b954-ssh zigpy.application DEBUG Received a packet: ZigbeePacket(timestamp=datetime.datetime(2024, 3, 17, 19, 46, 55, 667817, tzinfo=datetime.timezone.utc), src=AddrModeAddress(addr_mode=<AddrMode.NWK: 2>, address=0x5F36), src_ep=11, dst=AddrModeAddress(addr_mode=<AddrMode.NWK: 2>, address=0x0000), dst_ep=1, source_route=None, extended_timeout=False, tsn=None, profile_id=260, cluster_id=25, data=Ser
ialized[b'\x01\xc1\x01\x00\x0b\x10\x14\x01\n\x1f\x00\x01'], tx_options=<TransmitOptions.NONE: 0>, radius=0, non_member_radius=0, lqi=195, rssi=-61)
2024-03-17 20:46:55.668 a0d7b954-ssh zigpy.application WARNING Unknown device AddrModeAddress(addr_mode=<AddrMode.NWK: 2>, address=0x5F36)
2024-03-17 20:46:55.669 a0d7b954-ssh zigpy_deconz.api DEBUG Sending CommandId.write_parameter{'parameter_id': <NetworkParameter.use_predefined_nwk_panid: 21>, 'parameter': b'\x01'} (seq=14)
2024-03-17 20:46:55.669 a0d7b954-ssh zigpy_deconz.uart DEBUG Send: 0b0e00090002001501
2024-03-17 20:46:55.670 a0d7b954-ssh zigpy_deconz.zigbee.application DEBUG Sending packet: ZigbeePacket(timestamp=datetime.datetime(2024, 3, 17, 19, 46, 55, 670899, tzinfo=datetime.timezone.utc), src=AddrModeAddress(addr_mode=<AddrMode.NWK: 2>, address=0xFFFE), src_ep=0, dst=AddrModeAddress(addr_mode=<AddrMode.Broadcast: 15>, address=<BroadcastAddress.RX_ON_WHEN_IDLE: 65533>), dst_ep=0, source_route=None, extended_timeout=Fals
e, tsn=5, profile_id=0, cluster_id=<ZDOCmd.IEEE_addr_req: 0x0001>, data=Serialized[b'\x056_\x00\x00'], tx_options=<TransmitOptions.NONE: 0>, radius=0, non_member_radius=0, lqi=None, rssi=None)
2024-03-17 20:46:55.680 a0d7b954-ssh zigpy_deconz.uart DEBUG Frame received: 0x0b0e000800010015
2024-03-17 20:46:55.681 a0d7b954-ssh zigpy_deconz.api DEBUG Received command CommandId.write_parameter{'status': <Status.SUCCESS: 0>, 'frame_length': 8, 'payload_length': 1, 'parameter_id': <NetworkParameter.use_predefined_nwk_panid: 21>} (seq 14)
2024-03-17 20:46:55.682 a0d7b954-ssh zigpy_deconz.api DEBUG Sending CommandId.aps_data_confirm{} (seq=15)
2024-03-17 20:46:55.683 a0d7b954-ssh zigpy_deconz.uart DEBUG Send: 040f0007000000
2024-03-17 20:46:55.696 a0d7b954-ssh zigpy_deconz.uart DEBUG Frame received: 0x040f0013000c002e16026edd0000a700000000
2024-03-17 20:46:55.698 a0d7b954-ssh zigpy_deconz.api DEBUG Received command CommandId.aps_data_confirm{'status': <Status.SUCCESS: 0>, 'frame_length': 19, 'payload_length': 12, 'device_state': DeviceState(network_state=<NetworkState2.CONNECTED: 2>, device_state=<DeviceStateFlags.APSDE_DATA_CONFIRM|APSDE_DATA_INDICATION|APSDE_DATA_REQUEST_FREE_SLOTS_AVAILABLE: 11>), 'request_id': 22, 'dst_addr': DeconzAddressEndpoint(address_mo
de=<AddressMode.NWK: 2>, address=0xDD6E, endpoint=0), 'src_ep': 0, 'confirm_status': <TXStatus.APS_NO_ACK: 167>, 'reserved1': 0, 'reserved2': 0, 'reserved3': 0, 'reserved4': 0} (seq 15)
2024-03-17 20:46:55.699 a0d7b954-ssh zigpy_deconz.zigbee.application WARNING Unexpected transmit confirm for request id 22, Status: TXStatus.APS_NO_ACK
2024-03-17 20:46:55.700 a0d7b954-ssh zigpy_deconz.api DEBUG Sending CommandId.write_parameter{'parameter_id': <NetworkParameter.nwk_panid: 5>, 'parameter': b'b\x1a'} (seq=16)
2024-03-17 20:46:55.700 a0d7b954-ssh zigpy_deconz.uart DEBUG Send: 0b10000a00030005621a
2024-03-17 20:46:55.713 a0d7b954-ssh zigpy_deconz.uart DEBUG Frame received: 0x0b10000800010005
2024-03-17 20:46:55.713 a0d7b954-ssh zigpy_deconz.api DEBUG Received command CommandId.write_parameter{'status': <Status.SUCCESS: 0>, 'frame_length': 8, 'payload_length': 1, 'parameter_id': <NetworkParameter.nwk_panid: 5>} (seq 16)
2024-03-17 20:46:55.714 a0d7b954-ssh zigpy_deconz.api DEBUG Sending CommandId.aps_data_indication{'flags': <DataIndicationFlags.Always_Use_NWK_Source_Addr: 1>} (seq=17)
2024-03-17 20:46:55.715 a0d7b954-ssh zigpy_deconz.uart DEBUG Send: 1711000800010001
2024-03-17 20:46:55.728 a0d7b954-ssh zigpy_deconz.uart DEBUG Frame received: 0x1711002a0023002e0200000102fd7e0b040119000c0001ed01004f121514013001150000c000000000c0
2024-03-17 20:46:55.730 a0d7b954-ssh zigpy_deconz.api DEBUG Received command CommandId.aps_data_indication{'status': <Status.SUCCESS: 0>, 'frame_length': 42, 'payload_length': 35, 'device_state': DeviceState(network_state=<NetworkState2.CONNECTED: 2>, device_state=<DeviceStateFlags.APSDE_DATA_CONFIRM|APSDE_DATA_INDICATION|APSDE_DATA_REQUEST_FREE_SLOTS_AVAILABLE: 11>), 'dst_addr': DeconzAddress(address_mode=<AddressMode.NWK: 2>
, address=0x0000), 'dst_ep': 1, 'src_addr': DeconzAddress(address_mode=<AddressMode.NWK: 2>, address=0x7EFD), 'src_ep': 11, 'profile_id': 260, 'cluster_id': 25, 'asdu': b'\x01\xed\x01\x00O\x12\x15\x14\x010\x01\x15', 'reserved1': 0, 'reserved2': 0, 'lqi': 192, 'reserved3': 0, 'reserved4': 0, 'reserved5': 0, 'reserved6': 0, 'rssi': -64} (seq 17)
2024-03-17 20:46:55.731 a0d7b954-ssh zigpy.application DEBUG Received a packet: ZigbeePacket(timestamp=datetime.datetime(2024, 3, 17, 19, 46, 55, 731788, tzinfo=datetime.timezone.utc), src=AddrModeAddress(addr_mode=<AddrMode.NWK: 2>, address=0x7EFD), src_ep=11, dst=AddrModeAddress(addr_mode=<AddrMode.NWK: 2>, address=0x0000), dst_ep=1, source_route=None, extended_timeout=False, tsn=None, profile_id=260, cluster_id=25, data=Ser
ialized[b'\x01\xed\x01\x00O\x12\x15\x14\x010\x01\x15'], tx_options=<TransmitOptions.NONE: 0>, radius=0, non_member_radius=0, lqi=192, rssi=-64)
2024-03-17 20:46:55.732 a0d7b954-ssh zigpy.application WARNING Unknown device AddrModeAddress(addr_mode=<AddrMode.NWK: 2>, address=0x7EFD)
2024-03-17 20:46:55.733 a0d7b954-ssh zigpy_deconz.api DEBUG Sending CommandId.write_parameter{'parameter_id': <NetworkParameter.aps_extended_panid: 11>, 'parameter': b'\xdd\xdd\xdd\xdd\xdd\xdd\xdd\xdd'} (seq=18)
2024-03-17 20:46:55.733 a0d7b954-ssh zigpy_deconz.uart DEBUG Send: 0b1200100009000bdddddddddddddddd
2024-03-17 20:46:55.734 a0d7b954-ssh zigpy_deconz.zigbee.application DEBUG Sending packet: ZigbeePacket(timestamp=datetime.datetime(2024, 3, 17, 19, 46, 55, 734456, tzinfo=datetime.timezone.utc), src=AddrModeAddress(addr_mode=<AddrMode.NWK: 2>, address=0xFFFE), src_ep=0, dst=AddrModeAddress(addr_mode=<AddrMode.Broadcast: 15>, address=<BroadcastAddress.RX_ON_WHEN_IDLE: 65533>), dst_ep=0, source_route=None, extended_timeout=Fals
e, tsn=7, profile_id=0, cluster_id=<ZDOCmd.IEEE_addr_req: 0x0001>, data=Serialized[b'\x07\xfd~\x00\x00'], tx_options=<TransmitOptions.NONE: 0>, radius=0, non_member_radius=0, lqi=None, rssi=None)
2024-03-17 20:46:55.744 a0d7b954-ssh zigpy_deconz.uart DEBUG Frame received: 0x0b1200080001000b
2024-03-17 20:46:55.745 a0d7b954-ssh zigpy_deconz.api DEBUG Received command CommandId.write_parameter{'status': <Status.SUCCESS: 0>, 'frame_length': 8, 'payload_length': 1, 'parameter_id': <NetworkParameter.aps_extended_panid: 11>} (seq 18)
2024-03-17 20:46:55.746 a0d7b954-ssh zigpy_deconz.api DEBUG Sending CommandId.aps_data_confirm{} (seq=19)
2024-03-17 20:46:55.747 a0d7b954-ssh zigpy_deconz.uart DEBUG Send: 04130007000000
2024-03-17 20:46:55.761 a0d7b954-ssh zigpy_deconz.uart DEBUG Frame received: 0x04130013000c002e1702fdff00000000000000
2024-03-17 20:46:55.762 a0d7b954-ssh zigpy_deconz.api DEBUG Received command CommandId.aps_data_confirm{'status': <Status.SUCCESS: 0>, 'frame_length': 19, 'payload_length': 12, 'device_state': DeviceState(network_state=<NetworkState2.CONNECTED: 2>, device_state=<DeviceStateFlags.APSDE_DATA_CONFIRM|APSDE_DATA_INDICATION|APSDE_DATA_REQUEST_FREE_SLOTS_AVAILABLE: 11>), 'request_id': 23, 'dst_addr': DeconzAddressEndpoint(address_mo
de=<AddressMode.NWK: 2>, address=0xFFFD, endpoint=0), 'src_ep': 0, 'confirm_status': <TXStatus.SUCCESS: 0>, 'reserved1': 0, 'reserved2': 0, 'reserved3': 0, 'reserved4': 0} (seq 19)
2024-03-17 20:46:55.763 a0d7b954-ssh zigpy_deconz.zigbee.application WARNING Unexpected transmit confirm for request id 23, Status: TXStatus.SUCCESS
2024-03-17 20:46:55.764 a0d7b954-ssh zigpy_deconz.api DEBUG Sending CommandId.write_parameter{'parameter_id': <NetworkParameter.nwk_update_id: 36>, 'parameter': b'\x00'} (seq=20)
2024-03-17 20:46:55.764 a0d7b954-ssh zigpy_deconz.uart DEBUG Send: 0b1400090002002400
2024-03-17 20:46:55.776 a0d7b954-ssh zigpy_deconz.uart DEBUG Frame received: 0x0b14000800010024
2024-03-17 20:46:55.777 a0d7b954-ssh zigpy_deconz.api DEBUG Received command CommandId.write_parameter{'status': <Status.SUCCESS: 0>, 'frame_length': 8, 'payload_length': 1, 'parameter_id': <NetworkParameter.nwk_update_id: 36>} (seq 20)
2024-03-17 20:46:55.778 a0d7b954-ssh zigpy_deconz.api DEBUG Sending CommandId.aps_data_indication{'flags': <DataIndicationFlags.Always_Use_NWK_Source_Addr: 1>} (seq=21)
2024-03-17 20:46:55.779 a0d7b954-ssh zigpy_deconz.uart DEBUG Send: 1715000800010001
2024-03-17 20:46:55.793 a0d7b954-ssh zigpy_deconz.uart DEBUG Frame received: 0x1715002a0023002e0200000102365f0b040119000c0001c201000b1014010a1f00010000c200000000c2
2024-03-17 20:46:55.794 a0d7b954-ssh zigpy_deconz.api DEBUG Received command CommandId.aps_data_indication{'status': <Status.SUCCESS: 0>, 'frame_length': 42, 'payload_length': 35, 'device_state': DeviceState(network_state=<NetworkState2.CONNECTED: 2>, device_state=<DeviceStateFlags.APSDE_DATA_CONFIRM|APSDE_DATA_INDICATION|APSDE_DATA_REQUEST_FREE_SLOTS_AVAILABLE: 11>), 'dst_addr': DeconzAddress(address_mode=<AddressMode.NWK: 2>
, address=0x0000), 'dst_ep': 1, 'src_addr': DeconzAddress(address_mode=<AddressMode.NWK: 2>, address=0x5F36), 'src_ep': 11, 'profile_id': 260, 'cluster_id': 25, 'asdu': b'\x01\xc2\x01\x00\x0b\x10\x14\x01\n\x1f\x00\x01', 'reserved1': 0, 'reserved2': 0, 'lqi': 194, 'reserved3': 0, 'reserved4': 0, 'reserved5': 0, 'reserved6': 0, 'rssi': -62} (seq 21)
2024-03-17 20:46:55.795 a0d7b954-ssh zigpy.application DEBUG Received a packet: ZigbeePacket(timestamp=datetime.datetime(2024, 3, 17, 19, 46, 55, 795811, tzinfo=datetime.timezone.utc), src=AddrModeAddress(addr_mode=<AddrMode.NWK: 2>, address=0x5F36), src_ep=11, dst=AddrModeAddress(addr_mode=<AddrMode.NWK: 2>, address=0x0000), dst_ep=1, source_route=None, extended_timeout=False, tsn=None, profile_id=260, cluster_id=25, data=Ser
ialized[b'\x01\xc2\x01\x00\x0b\x10\x14\x01\n\x1f\x00\x01'], tx_options=<TransmitOptions.NONE: 0>, radius=0, non_member_radius=0, lqi=194, rssi=-62)
2024-03-17 20:46:55.796 a0d7b954-ssh zigpy.application WARNING Unknown device AddrModeAddress(addr_mode=<AddrMode.NWK: 2>, address=0x5F36)
2024-03-17 20:46:55.797 a0d7b954-ssh zigpy_deconz.api DEBUG Sending CommandId.write_parameter{'parameter_id': <NetworkParameter.network_key: 24>, 'parameter': b'\x00\x01\x03\x05\x07\t\x0b\r\x0f\x00\x02\x04\x06\x08\n\x0c\r'} (seq=22)
2024-03-17 20:46:55.797 a0d7b954-ssh zigpy_deconz.uart DEBUG Send: 0b160019001200180001030507090b0d0f00020406080a0c0d
2024-03-17 20:46:55.798 a0d7b954-ssh zigpy_deconz.zigbee.application DEBUG Sending packet: ZigbeePacket(timestamp=datetime.datetime(2024, 3, 17, 19, 46, 55, 798522, tzinfo=datetime.timezone.utc), src=AddrModeAddress(addr_mode=<AddrMode.NWK: 2>, address=0xFFFE), src_ep=0, dst=AddrModeAddress(addr_mode=<AddrMode.Broadcast: 15>, address=<BroadcastAddress.RX_ON_WHEN_IDLE: 65533>), dst_ep=0, source_route=None, extended_timeout=Fals
e, tsn=9, profile_id=0, cluster_id=<ZDOCmd.IEEE_addr_req: 0x0001>, data=Serialized[b'\t6_\x00\x00'], tx_options=<TransmitOptions.NONE: 0>, radius=0, non_member_radius=0, lqi=None, rssi=None)
2024-03-17 20:46:55.809 a0d7b954-ssh zigpy_deconz.uart DEBUG Frame received: 0x0b16000800010018
2024-03-17 20:46:55.809 a0d7b954-ssh zigpy_deconz.api DEBUG Received command CommandId.write_parameter{'status': <Status.SUCCESS: 0>, 'frame_length': 8, 'payload_length': 1, 'parameter_id': <NetworkParameter.network_key: 24>} (seq 22)
2024-03-17 20:46:55.810 a0d7b954-ssh zigpy_deconz.api DEBUG Sending CommandId.aps_data_confirm{} (seq=23)
2024-03-17 20:46:55.811 a0d7b954-ssh zigpy_deconz.uart DEBUG Send: 04170007000000
2024-03-17 20:46:55.824 a0d7b954-ssh zigpy_deconz.uart DEBUG Frame received: 0x04170013000c002a1902fdff00000000000000
2024-03-17 20:46:55.826 a0d7b954-ssh zigpy_deconz.api DEBUG Received command CommandId.aps_data_confirm{'status': <Status.SUCCESS: 0>, 'frame_length': 19, 'payload_length': 12, 'device_state': DeviceState(network_state=<NetworkState2.CONNECTED: 2>, device_state=<DeviceStateFlags.APSDE_DATA_INDICATION|APSDE_DATA_REQUEST_FREE_SLOTS_AVAILABLE: 10>), 'request_id': 25, 'dst_addr': DeconzAddressEndpoint(address_mode=<AddressMode.NWK
: 2>, address=0xFFFD, endpoint=0), 'src_ep': 0, 'confirm_status': <TXStatus.SUCCESS: 0>, 'reserved1': 0, 'reserved2': 0, 'reserved3': 0, 'reserved4': 0} (seq 23)
2024-03-17 20:46:55.827 a0d7b954-ssh zigpy_deconz.zigbee.application WARNING Unexpected transmit confirm for request id 25, Status: TXStatus.SUCCESS
2024-03-17 20:46:55.828 a0d7b954-ssh zigpy_deconz.api DEBUG Sending CommandId.write_parameter{'parameter_id': <NetworkParameter.trust_center_address: 14>, 'parameter': b'x<\t\xff\xff.!\x00'} (seq=24)
2024-03-17 20:46:55.829 a0d7b954-ssh zigpy_deconz.uart DEBUG Send: 0b1800100009000e783c09ffff2e2100
2024-03-17 20:46:55.840 a0d7b954-ssh zigpy_deconz.uart DEBUG Frame received: 0x0b1800080001000e
2024-03-17 20:46:55.841 a0d7b954-ssh zigpy_deconz.api DEBUG Received command CommandId.write_parameter{'status': <Status.SUCCESS: 0>, 'frame_length': 8, 'payload_length': 1, 'parameter_id': <NetworkParameter.trust_center_address: 14>} (seq 24)
2024-03-17 20:46:55.842 a0d7b954-ssh zigpy_deconz.api DEBUG Sending CommandId.aps_data_indication{'flags': <DataIndicationFlags.Always_Use_NWK_Source_Addr: 1>} (seq=25)
2024-03-17 20:46:55.843 a0d7b954-ssh zigpy_deconz.uart DEBUG Send: 1719000800010001
2024-03-17 20:46:55.856 a0d7b954-ssh zigpy_deconz.uart DEBUG Frame received: 0x171900290022002a02ffff0002ec1d00000000000b00ee783c09ffff2e210000000000c400000000c4
2024-03-17 20:46:55.858 a0d7b954-ssh zigpy_deconz.api DEBUG Received command CommandId.aps_data_indication{'status': <Status.SUCCESS: 0>, 'frame_length': 41, 'payload_length': 34, 'device_state': DeviceState(network_state=<NetworkState2.CONNECTED: 2>, device_state=<DeviceStateFlags.APSDE_DATA_INDICATION|APSDE_DATA_REQUEST_FREE_SLOTS_AVAILABLE: 10>), 'dst_addr': DeconzAddress(address_mode=<AddressMode.NWK: 2>, address=0xFFFF),
'dst_ep': 0, 'src_addr': DeconzAddress(address_mode=<AddressMode.NWK: 2>, address=0x1DEC), 'src_ep': 0, 'profile_id': 0, 'cluster_id': 0, 'asdu': b'\xeex<\t\xff\xff.!\x00\x00\x00', 'reserved1': 0, 'reserved2': 0, 'lqi': 196, 'reserved3': 0, 'reserved4': 0, 'reserved5': 0, 'reserved6': 0, 'rssi': -60} (seq 25)
2024-03-17 20:46:55.859 a0d7b954-ssh zigpy.application DEBUG Received a packet: ZigbeePacket(timestamp=datetime.datetime(2024, 3, 17, 19, 46, 55, 859228, tzinfo=datetime.timezone.utc), src=AddrModeAddress(addr_mode=<AddrMode.NWK: 2>, address=0x1DEC), src_ep=0, dst=AddrModeAddress(addr_mode=<AddrMode.Broadcast: 15>, address=<BroadcastAddress.ALL_DEVICES: 65535>), dst_ep=0, source_route=None, extended_timeout=False, tsn=None, pr
ofile_id=0, cluster_id=0, data=Serialized[b'\xeex<\t\xff\xff.!\x00\x00\x00'], tx_options=<TransmitOptions.NONE: 0>, radius=0, non_member_radius=0, lqi=196, rssi=-60)
2024-03-17 20:46:55.860 a0d7b954-ssh zigpy.application WARNING Unknown device AddrModeAddress(addr_mode=<AddrMode.NWK: 2>, address=0x1DEC)
2024-03-17 20:46:55.860 a0d7b954-ssh zigpy_deconz.api DEBUG Sending CommandId.write_parameter{'parameter_id': <NetworkParameter.link_key: 25>, 'parameter': b'x<\t\xff\xff.!\x00ZigBeeAlliance09'} (seq=26)
2024-03-17 20:46:55.861 a0d7b954-ssh zigpy_deconz.uart DEBUG Send: 0b1a002000190019783c09ffff2e21005a6967426565416c6c69616e63653039
2024-03-17 20:46:55.862 a0d7b954-ssh zigpy_deconz.zigbee.application DEBUG Sending packet: ZigbeePacket(timestamp=datetime.datetime(2024, 3, 17, 19, 46, 55, 861979, tzinfo=datetime.timezone.utc), src=AddrModeAddress(addr_mode=<AddrMode.NWK: 2>, address=0xFFFE), src_ep=0, dst=AddrModeAddress(addr_mode=<AddrMode.Broadcast: 15>, address=<BroadcastAddress.RX_ON_WHEN_IDLE: 65533>), dst_ep=0, source_route=None, extended_timeout=Fals
e, tsn=11, profile_id=0, cluster_id=<ZDOCmd.IEEE_addr_req: 0x0001>, data=Serialized[b'\x0b\xec\x1d\x00\x00'], tx_options=<TransmitOptions.NONE: 0>, radius=0, non_member_radius=0, lqi=None, rssi=None)
2024-03-17 20:46:55.872 a0d7b954-ssh zigpy_deconz.uart DEBUG Frame received: 0x0b1a000800010019
2024-03-17 20:46:55.873 a0d7b954-ssh zigpy_deconz.api DEBUG Received command CommandId.write_parameter{'status': <Status.SUCCESS: 0>, 'frame_length': 8, 'payload_length': 1, 'parameter_id': <NetworkParameter.link_key: 25>} (seq 26)
2024-03-17 20:46:55.873 a0d7b954-ssh zigpy_deconz.api DEBUG Sending CommandId.aps_data_indication{'flags': <DataIndicationFlags.Always_Use_NWK_Source_Addr: 1>} (seq=27)
2024-03-17 20:46:55.874 a0d7b954-ssh zigpy_deconz.uart DEBUG Send: 171b000800010001
2024-03-17 20:46:55.888 a0d7b954-ssh zigpy_deconz.uart DEBUG Frame received: 0x171b0026001f002a020000010295820204010204080008f10a000029f9030000bd00000000bd
2024-03-17 20:46:55.890 a0d7b954-ssh zigpy_deconz.api DEBUG Received command CommandId.aps_data_indication{'status': <Status.SUCCESS: 0>, 'frame_length': 38, 'payload_length': 31, 'device_state': DeviceState(network_state=<NetworkState2.CONNECTED: 2>, device_state=<DeviceStateFlags.APSDE_DATA_INDICATION|APSDE_DATA_REQUEST_FREE_SLOTS_AVAILABLE: 10>), 'dst_addr': DeconzAddress(address_mode=<AddressMode.NWK: 2>, address=0x0000),
'dst_ep': 1, 'src_addr': DeconzAddress(address_mode=<AddressMode.NWK: 2>, address=0x8295), 'src_ep': 2, 'profile_id': 260, 'cluster_id': 1026, 'asdu': b'\x08\xf1\n\x00\x00)\xf9\x03', 'reserved1': 0, 'reserved2': 0, 'lqi': 189, 'reserved3': 0, 'reserved4': 0, 'reserved5': 0, 'reserved6': 0, 'rssi': -67} (seq 27)
2024-03-17 20:46:55.891 a0d7b954-ssh zigpy.application DEBUG Received a packet: ZigbeePacket(timestamp=datetime.datetime(2024, 3, 17, 19, 46, 55, 891653, tzinfo=datetime.timezone.utc), src=AddrModeAddress(addr_mode=<AddrMode.NWK: 2>, address=0x8295), src_ep=2, dst=AddrModeAddress(addr_mode=<AddrMode.NWK: 2>, address=0x0000), dst_ep=1, source_route=None, extended_timeout=False, tsn=None, profile_id=260, cluster_id=1026, data=Se
rialized[b'\x08\xf1\n\x00\x00)\xf9\x03'], tx_options=<TransmitOptions.NONE: 0>, radius=0, non_member_radius=0, lqi=189, rssi=-67)
2024-03-17 20:46:55.892 a0d7b954-ssh zigpy.application WARNING Unknown device AddrModeAddress(addr_mode=<AddrMode.NWK: 2>, address=0x8295)
2024-03-17 20:46:55.893 a0d7b954-ssh zigpy_deconz.api DEBUG Sending CommandId.change_network_state{'network_state': <NetworkState.OFFLINE: 0>} (seq=28)
2024-03-17 20:46:55.893 a0d7b954-ssh zigpy_deconz.uart DEBUG Send: 081c00060000
2024-03-17 20:46:55.894 a0d7b954-ssh zigpy_deconz.zigbee.application DEBUG Sending packet: ZigbeePacket(timestamp=datetime.datetime(2024, 3, 17, 19, 46, 55, 894537, tzinfo=datetime.timezone.utc), src=AddrModeAddress(addr_mode=<AddrMode.NWK: 2>, address=0xFFFE), src_ep=0, dst=AddrModeAddress(addr_mode=<AddrMode.Broadcast: 15>, address=<BroadcastAddress.RX_ON_WHEN_IDLE: 65533>), dst_ep=0, source_route=None, extended_timeout=Fals
e, tsn=13, profile_id=0, cluster_id=<ZDOCmd.IEEE_addr_req: 0x0001>, data=Serialized[b'\r\x95\x82\x00\x00'], tx_options=<TransmitOptions.NONE: 0>, radius=0, non_member_radius=0, lqi=None, rssi=None)
2024-03-17 20:46:55.904 a0d7b954-ssh zigpy_deconz.uart DEBUG Frame received: 0x081c00060000
2024-03-17 20:46:55.905 a0d7b954-ssh zigpy_deconz.api DEBUG Received command CommandId.change_network_state{'status': <Status.SUCCESS: 0>, 'frame_length': 6, 'network_state': <NetworkState.OFFLINE: 0>} (seq 28)
2024-03-17 20:46:55.906 a0d7b954-ssh zigpy_deconz.uart DEBUG Frame received: 0x0e1d0007000300
2024-03-17 20:46:55.906 a0d7b954-ssh zigpy_deconz.api DEBUG Received command CommandId.device_state_changed{'status': <Status.SUCCESS: 0>, 'frame_length': 7, 'device_state': DeviceState(network_state=<NetworkState2.LEAVING: 3>, device_state=<DeviceStateFlags: 0>), 'reserved': 0} (seq 29)
2024-03-17 20:46:55.908 a0d7b954-ssh zigpy_deconz.api DEBUG Network device_state transition: CONNECTED -> LEAVING
2024-03-17 20:46:55.908 a0d7b954-ssh zigpy_deconz.api DEBUG Sending CommandId.aps_data_indication{'flags': <DataIndicationFlags.Always_Use_NWK_Source_Addr: 1>} (seq=29)
2024-03-17 20:46:55.909 a0d7b954-ssh zigpy_deconz.uart DEBUG Send: 171d000800010001
2024-03-17 20:46:55.920 a0d7b954-ssh zigpy_deconz.uart DEBUG Frame received: 0x171d0026001f00030200000102ec1d02040102040800082c0a0000295f070000c600000000c6
2024-03-17 20:46:55.922 a0d7b954-ssh zigpy_deconz.api DEBUG Received command CommandId.aps_data_indication{'status': <Status.SUCCESS: 0>, 'frame_length': 38, 'payload_length': 31, 'device_state': DeviceState(network_state=<NetworkState2.LEAVING: 3>, device_state=<DeviceStateFlags: 0>), 'dst_addr': DeconzAddress(address_mode=<AddressMode.NWK: 2>, address=0x0000), 'dst_ep': 1, 'src_addr': DeconzAddress(address_mode=<AddressMode.
NWK: 2>, address=0x1DEC), 'src_ep': 2, 'profile_id': 260, 'cluster_id': 1026, 'asdu': b'\x08,\n\x00\x00)_\x07', 'reserved1': 0, 'reserved2': 0, 'lqi': 198, 'reserved3': 0, 'reserved4': 0, 'reserved5': 0, 'reserved6': 0, 'rssi': -58} (seq 29)
2024-03-17 20:46:55.922 a0d7b954-ssh zigpy.application DEBUG Received a packet: ZigbeePacket(timestamp=datetime.datetime(2024, 3, 17, 19, 46, 55, 922934, tzinfo=datetime.timezone.utc), src=AddrModeAddress(addr_mode=<AddrMode.NWK: 2>, address=0x1DEC), src_ep=2, dst=AddrModeAddress(addr_mode=<AddrMode.NWK: 2>, address=0x0000), dst_ep=1, source_route=None, extended_timeout=False, tsn=None, profile_id=260, cluster_id=1026, data=Se
rialized[b'\x08,\n\x00\x00)_\x07'], tx_options=<TransmitOptions.NONE: 0>, radius=0, non_member_radius=0, lqi=198, rssi=-58)
2024-03-17 20:46:55.923 a0d7b954-ssh zigpy.application WARNING Unknown device AddrModeAddress(addr_mode=<AddrMode.NWK: 2>, address=0x1DEC)
2024-03-17 20:46:55.923 a0d7b954-ssh zigpy_deconz.api DEBUG Sending CommandId.device_state{} (seq=30)
2024-03-17 20:46:55.924 a0d7b954-ssh zigpy_deconz.uart DEBUG Send: 071e000800000000
2024-03-17 20:46:55.924 a0d7b954-ssh zigpy_deconz.zigbee.application DEBUG Sending packet: ZigbeePacket(timestamp=datetime.datetime(2024, 3, 17, 19, 46, 55, 924861, tzinfo=datetime.timezone.utc), src=AddrModeAddress(addr_mode=<AddrMode.NWK: 2>, address=0xFFFE), src_ep=0, dst=AddrModeAddress(addr_mode=<AddrMode.Broadcast: 15>, address=<BroadcastAddress.RX_ON_WHEN_IDLE: 65533>), dst_ep=0, source_route=None, extended_timeout=Fals
e, tsn=15, profile_id=0, cluster_id=<ZDOCmd.IEEE_addr_req: 0x0001>, data=Serialized[b'\x0f\xec\x1d\x00\x00'], tx_options=<TransmitOptions.NONE: 0>, radius=0, non_member_radius=0, lqi=None, rssi=None)
2024-03-17 20:46:55.925 a0d7b954-ssh zigpy_deconz.api DEBUG Waiting for free slots to become available
2024-03-17 20:46:55.936 a0d7b954-ssh zigpy_deconz.uart DEBUG Frame received: 0x071e000800030000
2024-03-17 20:46:55.937 a0d7b954-ssh zigpy_deconz.api DEBUG Received command CommandId.device_state{'status': <Status.SUCCESS: 0>, 'frame_length': 8, 'device_state': DeviceState(network_state=<NetworkState2.LEAVING: 3>, device_state=<DeviceStateFlags: 0>), 'reserved1': 0, 'reserved2': 0} (seq 30)
2024-03-17 20:46:55.937 a0d7b954-ssh zigpy_deconz.api DEBUG Sending CommandId.aps_data_request{'request_id': 2, 'flags': <DeconzSendDataFlags.NONE: 0>, 'dst': DeconzAddressEndpoint(address_mode=<AddressMode.NWK: 2>, address=0xFFFD, endpoint=0), 'profile_id': 0, 'cluster_id': <ZDOCmd.IEEE_addr_req: 0x0001>, 'src_ep': 0, 'asdu': b'\x01\xb3+\x00\x00', 'tx_options': <DeconzTransmitOptions.USE_NWK_KEY_SECURITY: 220:46:55 [370/1564]
lays': None} (seq=31)
2024-03-17 20:46:55.938 a0d7b954-ssh zigpy_deconz.uart DEBUG Send: 121f001b001400020002fdff000000010000050001b32b00000200
2024-03-17 20:46:55.952 a0d7b954-ssh zigpy_deconz.uart DEBUG Frame received: 0x121f06090002000300
2024-03-17 20:46:55.953 a0d7b954-ssh zigpy_deconz.api DEBUG Received command CommandId.aps_data_request{'status': <Status.NO_NETWORK: 6>, 'frame_length': 9, 'payload_length': 2, 'device_state': DeviceState(network_state=<NetworkState2.LEAVING: 3>, device_state=<DeviceStateFlags: 0>), 'request_id': 0} (seq 31)
2024-03-17 20:46:55.953 a0d7b954-ssh zigpy_deconz.api DEBUG 'aps_data_request' failure: <CommandId.aps_data_request: 18>, status: <Status.NO_NETWORK: 6>
2024-03-17 20:46:55.954 a0d7b954-ssh zigpy_deconz.api DEBUG Sending CommandId.aps_data_request{'request_id': 4, 'flags': <DeconzSendDataFlags.NONE: 0>, 'dst': DeconzAddressEndpoint(address_mode=<AddressMode.NWK: 2>, address=0xFFFD, endpoint=0), 'profile_id': 0, 'cluster_id': <ZDOCmd.IEEE_addr_req: 0x0001>, 'src_ep': 0, 'asdu': b'\x03\x98\xdb\x00\x00', 'tx_options': <DeconzTransmitOptions.USE_NWK_KEY_SECURITY: 2>, 'radius': 0,
'relays': None} (seq=32)
2024-03-17 20:46:55.954 a0d7b954-ssh zigpy_deconz.uart DEBUG Send: 1220001b001400040002fdff00000001000005000398db00000200
2024-03-17 20:46:55.954 a0d7b954-ssh asyncio ERROR Task exception was never retrieved
future: <Task finished name='discover_unknown_device_from_packet-nwk=0x2BB3' coro=<ControllerApplication._discover_unknown_device() done, defined at /usr/lib/python3.11/site-packages/zigpy/application.py:950> exception=DeliveryError("Failed to enqueue packet: CommandError('<CommandId.aps_data_request: 18>, status: <Status.NO_NETWORK: 6>')")>
Traceback (most recent call last):
File "/usr/lib/python3.11/site-packages/zigpy_deconz/zigbee/application.py", line 508, in send_packet
await self._api.aps_data_request(
File "/usr/lib/python3.11/site-packages/zigpy_deconz/api.py", line 882, in aps_data_request
rsp = await self.send_command(
^^^^^^^^^^^^^^^^^^^^^^^^
File "/usr/lib/python3.11/site-packages/zigpy_deconz/api.py", line 508, in send_command
return await self._command(cmd, **kwargs)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/usr/lib/python3.11/site-packages/zigpy_deconz/api.py", line 589, in _command
return await fut
^^^^^^^^^
zigpy_deconz.exception.CommandError: <CommandId.aps_data_request: 18>, status: <Status.NO_NETWORK: 6>
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib/python3.11/site-packages/zigpy/application.py", line 953, in _discover_unknown_device
return await zigpy.zdo.broadcast(
^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/usr/lib/python3.11/site-packages/zigpy/device.py", line 688, in broadcast
return await app.broadcast(
^^^^^^^^^^^^^^^^^^^^
File "/usr/lib/python3.11/site-packages/zigpy/application.py", line 929, in broadcast
await self.send_packet(
File "/usr/lib/python3.11/site-packages/zigpy_deconz/zigbee/application.py", line 522, in send_packet
raise zigpy.exceptions.DeliveryError(
zigpy.exceptions.DeliveryError: Failed to enqueue packet: CommandError('<CommandId.aps_data_request: 18>, status: <Status.NO_NETWORK: 6>')
2024-03-17 20:46:55.968 a0d7b954-ssh zigpy_deconz.uart DEBUG Frame received: 0x122006090002000300
2024-03-17 20:46:55.969 a0d7b954-ssh zigpy_deconz.api DEBUG Received command CommandId.aps_data_request{'status': <Status.NO_NETWORK: 6>, 'frame_length': 9, 'payload_length': 2, 'device_state': DeviceState(network_state=<NetworkState2.LEAVING: 3>, device_state=<DeviceStateFlags: 0>), 'request_id': 0} (seq 32)
2024-03-17 20:46:55.969 a0d7b954-ssh zigpy_deconz.api DEBUG 'aps_data_request' failure: <CommandId.aps_data_request: 18>, status: <Status.NO_NETWORK: 6>
2024-03-17 20:46:55.969 a0d7b954-ssh zigpy_deconz.api DEBUG Sending CommandId.aps_data_request{'request_id': 6, 'flags': <DeconzSendDataFlags.NONE: 0>, 'dst': DeconzAddressEndpoint(address_mode=<AddressMode.NWK: 2>, address=0xFFFD, endpoint=0), 'profile_id': 0, 'cluster_id': <ZDOCmd.IEEE_addr_req: 0x0001>, 'src_ep': 0, 'asdu': b'\x056_\x00\x00', 'tx_options': <DeconzTransmitOptions.USE_NWK_KEY_SECURITY: 2>, 'radius': 0, 'relay
s': None} (seq=33)
2024-03-17 20:46:55.969 a0d7b954-ssh zigpy_deconz.uart DEBUG Send: 1221001b001400060002fdff000000010000050005365f00000200
2024-03-17 20:46:55.970 a0d7b954-ssh asyncio ERROR Task exception was never retrieved
future: <Task finished name='discover_unknown_device_from_packet-nwk=0xDB98' coro=<ControllerApplication._discover_unknown_device() done, defined at /usr/lib/python3.11/site-packages/zigpy/application.py:950> exception=DeliveryError("Failed to enqueue packet: CommandError('<CommandId.aps_data_request: 18>, status: <Status.NO_NETWORK: 6>')")>
Traceback (most recent call last):
File "/usr/lib/python3.11/site-packages/zigpy_deconz/zigbee/application.py", line 508, in send_packet
await self._api.aps_data_request(
File "/usr/lib/python3.11/site-packages/zigpy_deconz/api.py", line 882, in aps_data_request
rsp = await self.send_command(
^^^^^^^^^^^^^^^^^^^^^^^^
File "/usr/lib/python3.11/site-packages/zigpy_deconz/api.py", line 508, in send_command
return await self._command(cmd, **kwargs)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/usr/lib/python3.11/site-packages/zigpy_deconz/api.py", line 589, in _command
return await fut
^^^^^^^^^
zigpy_deconz.exception.CommandError: <CommandId.aps_data_request: 18>, status: <Status.NO_NETWORK: 6>
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib/python3.11/site-packages/zigpy/application.py", line 953, in _discover_unknown_device
return await zigpy.zdo.broadcast(
^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/usr/lib/python3.11/site-packages/zigpy/device.py", line 688, in broadcast
return await app.broadcast(
^^^^^^^^^^^^^^^^^^^^
File "/usr/lib/python3.11/site-packages/zigpy/application.py", line 929, in broadcast
await self.send_packet(
File "/usr/lib/python3.11/site-packages/zigpy_deconz/zigbee/application.py", line 522, in send_packet
raise zigpy.exceptions.DeliveryError(
zigpy.exceptions.DeliveryError: Failed to enqueue packet: CommandError('<CommandId.aps_data_request: 18>, status: <Status.NO_NETWORK: 6>')
2024-03-17 20:46:55.985 a0d7b954-ssh zigpy_deconz.uart DEBUG Frame received: 0x122106090002000300
2024-03-17 20:46:55.985 a0d7b954-ssh zigpy_deconz.api DEBUG Received command CommandId.aps_data_request{'status': <Status.NO_NETWORK: 6>, 'frame_length': 9, 'payload_length': 2, 'device_state': DeviceState(network_state=<NetworkState2.LEAVING: 3>, device_state=<DeviceStateFlags: 0>), 'request_id': 0} (seq 33)
2024-03-17 20:46:55.986 a0d7b954-ssh zigpy_deconz.api DEBUG 'aps_data_request' failure: <CommandId.aps_data_request: 18>, status: <Status.NO_NETWORK: 6>
2024-03-17 20:46:55.986 a0d7b954-ssh zigpy_deconz.api DEBUG Sending CommandId.aps_data_request{'request_id': 8, 'flags': <DeconzSendDataFlags.NONE: 0>, 'dst': DeconzAddressEndpoint(address_mode=<AddressMode.NWK: 2>, address=0xFFFD, endpoint=0), 'profile_id': 0, 'cluster_id': <ZDOCmd.IEEE_addr_req: 0x0001>, 'src_ep': 0, 'asdu': b'\x07\xfd~\x00\x00', 'tx_options': <DeconzTransmitOptions.USE_NWK_KEY_SECURITY: 2>, 'radius': 0, 're
lays': None} (seq=34)
2024-03-17 20:46:55.987 a0d7b954-ssh zigpy_deconz.uart DEBUG Send: 1222001b001400080002fdff000000010000050007fd7e00000200
2024-03-17 20:46:55.987 a0d7b954-ssh asyncio ERROR Task exception was never retrieved
future: <Task finished name='discover_unknown_device_from_packet-nwk=0x5F36' coro=<ControllerApplication._discover_unknown_device() done, defined at /usr/lib/python3.11/site-packages/zigpy/application.py:950> exception=DeliveryError("Failed to enqueue packet: CommandError('<CommandId.aps_data_request: 18>, status: <Status.NO_NETWORK: 6>')")>
Traceback (most recent call last):
File "/usr/lib/python3.11/site-packages/zigpy_deconz/zigbee/application.py", line 508, in send_packet
await self._api.aps_data_request(
File "/usr/lib/python3.11/site-packages/zigpy_deconz/api.py", line 882, in aps_data_request
rsp = await self.send_command(
^^^^^^^^^^^^^^^^^^^^^^^^
File "/usr/lib/python3.11/site-packages/zigpy_deconz/api.py", line 508, in send_command
return await self._command(cmd, **kwargs)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/usr/lib/python3.11/site-packages/zigpy_deconz/api.py", line 589, in _command
return await fut
^^^^^^^^^
zigpy_deconz.exception.CommandError: <CommandId.aps_data_request: 18>, status: <Status.NO_NETWORK: 6>
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib/python3.11/site-packages/zigpy/application.py", line 953, in _discover_unknown_device
return await zigpy.zdo.broadcast(
^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/usr/lib/python3.11/site-packages/zigpy/device.py", line 688, in broadcast
return await app.broadcast(
^^^^^^^^^^^^^^^^^^^^
File "/usr/lib/python3.11/site-packages/zigpy/application.py", line 929, in broadcast
await self.send_packet(
File "/usr/lib/python3.11/site-packages/zigpy_deconz/zigbee/application.py", line 522, in send_packet
raise zigpy.exceptions.DeliveryError(
zigpy.exceptions.DeliveryError: Failed to enqueue packet: CommandError('<CommandId.aps_data_request: 18>, status: <Status.NO_NETWORK: 6>')
2024-03-17 20:46:56.000 a0d7b954-ssh zigpy_deconz.uart DEBUG Frame received: 0x122206090002000300
2024-03-17 20:46:56.001 a0d7b954-ssh zigpy_deconz.api DEBUG Received command CommandId.aps_data_request{'status': <Status.NO_NETWORK: 6>, 'frame_length': 9, 'payload_length': 2, 'device_state': DeviceState(network_state=<NetworkState2.LEAVING: 3>, device_state=<DeviceStateFlags: 0>), 'request_id': 0} (seq 34)
2024-03-17 20:46:56.001 a0d7b954-ssh zigpy_deconz.api DEBUG 'aps_data_request' failure: <CommandId.aps_data_request: 18>, status: <Status.NO_NETWORK: 6>
2024-03-17 20:46:56.002 a0d7b954-ssh zigpy_deconz.api DEBUG Sending CommandId.aps_data_request{'request_id': 10, 'flags': <DeconzSendDataFlags.NONE: 0>, 'dst': DeconzAddressEndpoint(address_mode=<AddressMode.NWK: 2>, address=0xFFFD, endpoint=0), 'profile_id': 0, 'cluster_id': <ZDOCmd.IEEE_addr_req: 0x0001>, 'src_ep': 0, 'asdu': b'\t6_\x00\x00', 'tx_options': <DeconzTransmitOptions.USE_NWK_KEY_SECURITY: 2>, 'radius': 0, 'relays
': None} (seq=35)
2024-03-17 20:46:56.003 a0d7b954-ssh zigpy_deconz.uart DEBUG Send: 1223001b0014000a0002fdff000000010000050009365f00000200
2024-03-17 20:46:56.003 a0d7b954-ssh asyncio ERROR Task exception was never retrieved
future: <Task finished name='discover_unknown_device_from_packet-nwk=0x7EFD' coro=<ControllerApplication._discover_unknown_device() done, defined at /usr/lib/python3.11/site-packages/zigpy/application.py:950> exception=DeliveryError("Failed to enqueue packet: CommandError('<CommandId.aps_data_request: 18>, status: <Status.NO_NETWORK: 6>')")>
Traceback (most recent call last):
File "/usr/lib/python3.11/site-packages/zigpy_deconz/zigbee/application.py", line 508, in send_packet
await self._api.aps_data_request(
File "/usr/lib/python3.11/site-packages/zigpy_deconz/api.py", line 882, in aps_data_request
rsp = await self.send_command(
^^^^^^^^^^^^^^^^^^^^^^^^
File "/usr/lib/python3.11/site-packages/zigpy_deconz/api.py", line 508, in send_command
return await self._command(cmd, **kwargs)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/usr/lib/python3.11/site-packages/zigpy_deconz/api.py", line 589, in _command
return await fut
^^^^^^^^^
zigpy_deconz.exception.CommandError: <CommandId.aps_data_request: 18>, status: <Status.NO_NETWORK: 6>
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib/python3.11/site-packages/zigpy/application.py", line 953, in _discover_unknown_device
return await zigpy.zdo.broadcast(
^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/usr/lib/python3.11/site-packages/zigpy/device.py", line 688, in broadcast
return await app.broadcast(
^^^^^^^^^^^^^^^^^^^^
File "/usr/lib/python3.11/site-packages/zigpy/application.py", line 929, in broadcast
await self.send_packet(
File "/usr/lib/python3.11/site-packages/zigpy_deconz/zigbee/application.py", line 522, in send_packet
raise zigpy.exceptions.DeliveryError(
zigpy.exceptions.DeliveryError: Failed to enqueue packet: CommandError('<CommandId.aps_data_request: 18>, status: <Status.NO_NETWORK: 6>')
2024-03-17 20:46:56.016 a0d7b954-ssh zigpy_deconz.uart DEBUG Frame received: 0x122306090002000300
2024-03-17 20:46:56.018 a0d7b954-ssh zigpy_deconz.api DEBUG Received command CommandId.aps_data_request{'status': <Status.NO_NETWORK: 6>, 'frame_length': 9, 'payload_length': 2, 'device_state': DeviceState(network_state=<NetworkState2.LEAVING: 3>, device_state=<DeviceStateFlags: 0>), 'request_id': 0} (seq 35)
2024-03-17 20:46:56.018 a0d7b954-ssh zigpy_deconz.api DEBUG 'aps_data_request' failure: <CommandId.aps_data_request: 18>, status: <Status.NO_NETWORK: 6>
2024-03-17 20:46:56.019 a0d7b954-ssh zigpy_deconz.api DEBUG Sending CommandId.aps_data_request{'request_id': 12, 'flags': <DeconzSendDataFlags.NONE: 0>, 'dst': DeconzAddressEndpoint(address_mode=<AddressMode.NWK: 2>, address=0xFFFD, endpoint=0), 'profile_id': 0, 'cluster_id': <ZDOCmd.IEEE_addr_req: 0x0001>, 'src_ep': 0, 'asdu': b'\x0b\xec\x1d\x00\x00', 'tx_options': <DeconzTransmitOptions.USE_NWK_KEY_SECURITY: 2>, 'radius': 0,
'relays': None} (seq=36)
2024-03-17 20:46:56.020 a0d7b954-ssh zigpy_deconz.uart DEBUG Send: 1224001b0014000c0002fdff00000001000005000bec1d00000200
2024-03-17 20:46:56.020 a0d7b954-ssh asyncio ERROR Task exception was never retrieved
future: <Task finished name='discover_unknown_device_from_packet-nwk=0x5F36' coro=<ControllerApplication._discover_unknown_device() done, defined at /usr/lib/python3.11/site-packages/zigpy/application.py:950> exception=DeliveryError("Failed to enqueue packet: CommandError('<CommandId.aps_data_request: 18>, status: <Status.NO_NETWORK: 6>')")>
Traceback (most recent call last):
File "/usr/lib/python3.11/site-packages/zigpy_deconz/zigbee/application.py", line 508, in send_packet
await self._api.aps_data_request(
File "/usr/lib/python3.11/site-packages/zigpy_deconz/api.py", line 882, in aps_data_request
rsp = await self.send_command(
^^^^^^^^^^^^^^^^^^^^^^^^
File "/usr/lib/python3.11/site-packages/zigpy_deconz/api.py", line 508, in send_command
return await self._command(cmd, **kwargs)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/usr/lib/python3.11/site-packages/zigpy_deconz/api.py", line 589, in _command
return await fut
^^^^^^^^^
zigpy_deconz.exception.CommandError: <CommandId.aps_data_request: 18>, status: <Status.NO_NETWORK: 6>
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib/python3.11/site-packages/zigpy/application.py", line 953, in _discover_unknown_device
return await zigpy.zdo.broadcast(
^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/usr/lib/python3.11/site-packages/zigpy/device.py", line 688, in broadcast
return await app.broadcast(
^^^^^^^^^^^^^^^^^^^^
File "/usr/lib/python3.11/site-packages/zigpy/application.py", line 929, in broadcast
await self.send_packet(
File "/usr/lib/python3.11/site-packages/zigpy_deconz/zigbee/application.py", line 522, in send_packet
raise zigpy.exceptions.DeliveryError(
zigpy.exceptions.DeliveryError: Failed to enqueue packet: CommandError('<CommandId.aps_data_request: 18>, status: <Status.NO_NETWORK: 6>')
2024-03-17 20:46:56.049 a0d7b954-ssh zigpy_deconz.uart DEBUG Frame received: 0x122506090002000300
2024-03-17 20:46:56.049 a0d7b954-ssh zigpy_deconz.api DEBUG Received command CommandId.aps_data_request{'status': <Status.NO_NETWORK: 6>, 'frame_length': 9, 'payload_length': 2, 'device_state': DeviceState(network_state=<NetworkState2.LEAVING: 3>, device_state=<DeviceStateFlags: 0>), 'request_id': 0} (seq 37)
2024-03-17 20:46:56.050 a0d7b954-ssh zigpy_deconz.api DEBUG 'aps_data_request' failure: <CommandId.aps_data_request: 18>, status: <Status.NO_NETWORK: 6>
2024-03-17 20:46:56.050 a0d7b954-ssh asyncio ERROR Task exception was never retrieved
future: <Task finished name='discover_unknown_device_from_packet-nwk=0x8295' coro=<ControllerApplication._discover_unknown_device() done, defined at /usr/lib/python3.11/site-packages/zigpy/application.py:950> exception=DeliveryError("Failed to enqueue packet: CommandError('<CommandId.aps_data_request: 18>, status: <Status.NO_NETWORK: 6>')")>
Traceback (most recent call last):
File "/usr/lib/python3.11/site-packages/zigpy_deconz/zigbee/application.py", line 508, in send_packet
await self._api.aps_data_request(
File "/usr/lib/python3.11/site-packages/zigpy_deconz/api.py", line 882, in aps_data_request
rsp = await self.send_command(
^^^^^^^^^^^^^^^^^^^^^^^^
File "/usr/lib/python3.11/site-packages/zigpy_deconz/api.py", line 508, in send_command
return await self._command(cmd, **kwargs)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/usr/lib/python3.11/site-packages/zigpy_deconz/api.py", line 589, in _command
return await fut
^^^^^^^^^
zigpy_deconz.exception.CommandError: <CommandId.aps_data_request: 18>, status: <Status.NO_NETWORK: 6>
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib/python3.11/site-packages/zigpy/application.py", line 953, in _discover_unknown_device
return await zigpy.zdo.broadcast(
^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/usr/lib/python3.11/site-packages/zigpy/device.py", line 688, in broadcast
return await app.broadcast(
^^^^^^^^^^^^^^^^^^^^
File "/usr/lib/python3.11/site-packages/zigpy/application.py", line 929, in broadcast
await self.send_packet(
File "/usr/lib/python3.11/site-packages/zigpy_deconz/zigbee/application.py", line 522, in send_packet
raise zigpy.exceptions.DeliveryError(
zigpy.exceptions.DeliveryError: Failed to enqueue packet: CommandError('<CommandId.aps_data_request: 18>, status: <Status.NO_NETWORK: 6>')
2024-03-17 20:46:56.939 a0d7b954-ssh zigpy_deconz.api DEBUG Sending CommandId.device_state{} (seq=38)
2024-03-17 20:46:56.940 a0d7b954-ssh zigpy_deconz.uart DEBUG Send: 0726000800000000
2024-03-17 20:46:56.945 a0d7b954-ssh zigpy_deconz.uart DEBUG Frame received: 0x0e260007000000
2024-03-17 20:46:56.945 a0d7b954-ssh zigpy_deconz.api DEBUG Received command CommandId.device_state_changed{'status': <Status.SUCCESS: 0>, 'frame_length': 7, 'device_state': DeviceState(network_state=<NetworkState2.OFFLINE: 0>, device_state=<DeviceStateFlags: 0>), 'reserved': 0} (seq 38)
2024-03-17 20:46:56.946 a0d7b954-ssh zigpy_deconz.api DEBUG Mismatched response, triggering error in 0.50s
2024-03-17 20:46:56.947 a0d7b954-ssh zigpy_deconz.uart DEBUG Frame received: 0x0726000800000000
2024-03-17 20:46:56.948 a0d7b954-ssh zigpy_deconz.api DEBUG Received command CommandId.device_state{'status': <Status.SUCCESS: 0>, 'frame_length': 8, 'device_state': DeviceState(network_state=<NetworkState2.OFFLINE: 0>, device_state=<DeviceStateFlags: 0>), 'reserved1': 0, 'reserved2': 0} (seq 38)
2024-03-17 20:46:56.948 a0d7b954-ssh zigpy_deconz.api DEBUG Clearing existing mismatched response timer
2024-03-17 20:46:56.949 a0d7b954-ssh zigpy_deconz.api DEBUG Network device_state transition: LEAVING -> OFFLINE
2024-03-17 20:46:58.952 a0d7b954-ssh zigpy_deconz.api DEBUG Sending CommandId.change_network_state{'network_state': <NetworkState.CONNECTED: 2>} (seq=39)
2024-03-17 20:46:58.953 a0d7b954-ssh zigpy_deconz.uart DEBUG Send: 082700060002
2024-03-17 20:46:58.961 a0d7b954-ssh zigpy_deconz.uart DEBUG Frame received: 0x082700060002
2024-03-17 20:46:58.962 a0d7b954-ssh zigpy_deconz.api DEBUG Received command CommandId.change_network_state{'status': <Status.SUCCESS: 0>, 'frame_length': 6, 'network_state': <NetworkState.CONNECTED: 2>} (seq 39)
2024-03-17 20:46:58.963 a0d7b954-ssh zigpy_deconz.api DEBUG Sending CommandId.device_state{} (seq=40)
2024-03-17 20:46:58.963 a0d7b954-ssh zigpy_deconz.uart DEBUG Send: 0728000800000000
2024-03-17 20:46:58.977 a0d7b954-ssh zigpy_deconz.uart DEBUG Frame received: 0x0e280007003a00
2024-03-17 20:46:58.978 a0d7b954-ssh zigpy_deconz.api DEBUG Received command CommandId.device_state_changed{'status': <Status.SUCCESS: 0>, 'frame_length': 7, 'device_state': DeviceState(network_state=<NetworkState2.CONNECTED: 2>, device_state=<DeviceStateFlags.APSDE_DATA_INDICATION|CONF_CHANGED|APSDE_DATA_REQUEST_FREE_SLOTS_AVAILABLE: 14>), 'reserved': 0} (seq 40)
2024-03-17 20:46:58.978 a0d7b954-ssh zigpy_deconz.api DEBUG Mismatched response, triggering error in 0.50s
2024-03-17 20:46:58.979 a0d7b954-ssh zigpy_deconz.api DEBUG Network device_state transition: OFFLINE -> CONNECTED
2024-03-17 20:46:59.479 a0d7b954-ssh zigpy_deconz.api DEBUG Firmware responded incorrectly (Response is mismatched! Sent <CommandId.device_state: 7>, received <CommandId.device_state_changed: 14>), retrying
2024-03-17 20:46:59.480 a0d7b954-ssh zigpy_deconz.api DEBUG Sending CommandId.aps_data_indication{'flags': <DataIndicationFlags.Always_Use_NWK_Source_Addr: 1>} (seq=41)
2024-03-17 20:46:59.480 a0d7b954-ssh zigpy_deconz.uart DEBUG Send: 1729000800010001
2024-03-17 20:46:59.489 a0d7b954-ssh zigpy_deconz.uart DEBUG Frame received: 0x1729002a0023003a0200000102365f0b040119000c0001c301000b1014010a1f00010000c700000000c7
2024-03-17 20:46:59.490 a0d7b954-ssh zigpy_deconz.api DEBUG Received command CommandId.aps_data_indication{'status': <Status.SUCCESS: 0>, 'frame_length': 42, 'payload_length': 35, 'device_state': DeviceState(network_state=<NetworkState2.CONNECTED: 2>, device_state=<DeviceStateFlags.APSDE_DATA_INDICATION|CONF_CHANGED|APSDE_DATA_REQUEST_FREE_SLOTS_AVAILABLE: 14>), 'dst_addr': DeconzAddress(address_mode=<AddressMode.NWK: 2>, addr
ess=0x0000), 'dst_ep': 1, 'src_addr': DeconzAddress(address_mode=<AddressMode.NWK: 2>, address=0x5F36), 'src_ep': 11, 'profile_id': 260, 'cluster_id': 25, 'asdu': b'\x01\xc3\x01\x00\x0b\x10\x14\x01\n\x1f\x00\x01', 'reserved1': 0, 'reserved2': 0, 'lqi': 199, 'reserved3': 0, 'reserved4': 0, 'reserved5': 0, 'reserved6': 0, 'rssi': -57} (seq 41)
2024-03-17 20:46:59.490 a0d7b954-ssh zigpy.application DEBUG Received a packet: ZigbeePacket(timestamp=datetime.datetime(2024, 3, 17, 19, 46, 59, 490502, tzinfo=datetime.timezone.utc), src=AddrModeAddress(addr_mode=<AddrMode.NWK: 2>, address=0x5F36), src_ep=11, dst=AddrModeAddress(addr_mode=<AddrMode.NWK: 2>, address=0x0000), dst_ep=1, source_route=None, extended_timeout=False, tsn=None, profile_id=260, cluster_id=25, data=Ser
ialized[b'\x01\xc3\x01\x00\x0b\x10\x14\x01\n\x1f\x00\x01'], tx_options=<TransmitOptions.NONE: 0>, radius=0, non_member_radius=0, lqi=199, rssi=-57)
2024-03-17 20:46:59.490 a0d7b954-ssh zigpy.application WARNING Unknown device AddrModeAddress(addr_mode=<AddrMode.NWK: 2>, address=0x5F36)
2024-03-17 20:46:59.490 a0d7b954-ssh zigpy_deconz.api DEBUG Sending CommandId.device_state{} (seq=42)
2024-03-17 20:46:59.491 a0d7b954-ssh zigpy_deconz.uart DEBUG Send: 072a000800000000
2024-03-17 20:46:59.491 a0d7b954-ssh zigpy_deconz.zigbee.application DEBUG Sending packet: ZigbeePacket(timestamp=datetime.datetime(2024, 3, 17, 19, 46, 59, 491412, tzinfo=datetime.timezone.utc), src=AddrModeAddress(addr_mode=<AddrMode.NWK: 2>, address=0xFFFE), src_ep=0, dst=AddrModeAddress(addr_mode=<AddrMode.Broadcast: 15>, address=<BroadcastAddress.RX_ON_WHEN_IDLE: 65533>), dst_ep=0, source_route=None, extended_timeout=False, tsn=17, profile_id=0, cluster_id=<ZDOCmd.IEEE_addr_req: 0x0001>, data=Serialized[b'\x116_\x00\x00'], tx_options=<TransmitOptions.NONE: 0>, radius=0, non_member_radius=0, lqi=None, rssi=None)
2024-03-17 20:46:59.505 a0d7b954-ssh zigpy_deconz.uart DEBUG Frame received: 0x072a0008003a0000
2024-03-17 20:46:59.505 a0d7b954-ssh zigpy_deconz.api DEBUG Received command CommandId.device_state{'status': <Status.SUCCESS: 0>, 'frame_length': 8, 'device_state': DeviceState(network_state=<NetworkState2.CONNECTED: 2>, device_state=<DeviceStateFlags.APSDE_DATA_INDICATION|CONF_CHANGED|APSDE_DATA_REQUEST_FREE_SLOTS_AVAILABLE: 14>), 'reserved1': 0, 'reserved2': 0} (seq 42)
2024-03-17 20:46:59.506 a0d7b954-ssh zigpy_deconz.api DEBUG Sending CommandId.aps_data_indication{'flags': <DataIndicationFlags.Always_Use_NWK_Source_Addr: 1>} (seq=43)
2024-03-17 20:46:59.506 a0d7b954-ssh zigpy_deconz.uart DEBUG Send: 172b000800010001
2024-03-17 20:46:59.521 a0d7b954-ssh zigpy_deconz.uart DEBUG Frame received: 0x172b0025001e003a02000001026edd0204010604070008440a000018010000bd00000000bd
2024-03-17 20:46:59.522 a0d7b954-ssh zigpy_deconz.api DEBUG Received command CommandId.aps_data_indication{'status': <Status.SUCCESS: 0>, 'frame_length': 37, 'payload_length': 30, 'device_state': DeviceState(network_state=<NetworkState2.CONNECTED: 2>, device_state=<DeviceStateFlags.APSDE_DATA_INDICATION|CONF_CHANGED|APSDE_DATA_REQUEST_FREE_SLOTS_AVAILABLE: 14>), 'dst_addr': DeconzAddress(address_mode=<AddressMode.NWK: 2>, address=0x0000), 'dst_ep': 1, 'src_addr': DeconzAddress(address_mode=<AddressMode.NWK: 2>, address=0xDD6E), 'src_ep': 2, 'profile_id': 260, 'cluster_id': 1030, 'asdu': b'\x08D\n\x00\x00\x18\x01', 'reserved1': 0, 'reserved2': 0, 'lqi': 189, 'reserved3': 0, 'reserved4': 0, 'reserved5': 0, 'reserved6': 0, 'rssi': -67} (seq 43)
2024-03-17 20:46:59.522 a0d7b954-ssh zigpy.application DEBUG Received a packet: ZigbeePacket(timestamp=datetime.datetime(2024, 3, 17, 19, 46, 59, 522611, tzinfo=datetime.timezone.utc), src=AddrModeAddress(addr_mode=<AddrMode.NWK: 2>, address=0xDD6E), src_ep=2, dst=AddrModeAddress(addr_mode=<AddrMode.NWK: 2>, address=0x0000), dst_ep=1, source_route=None, extended_timeout=False, tsn=None, profile_id=260, cluster_id=1030, data=Serialized[b'\x08D\n\x00\x00\x18\x01'], tx_options=<TransmitOptions.NONE: 0>, radius=0, non_member_radius=0, lqi=189, rssi=-67)
2024-03-17 20:46:59.522 a0d7b954-ssh zigpy.application WARNING Unknown device AddrModeAddress(addr_mode=<AddrMode.NWK: 2>, address=0xDD6E)
2024-03-17 20:46:59.523 a0d7b954-ssh zigpy_deconz.api DEBUG Sending CommandId.read_parameter{'parameter_id': <NetworkParameter.mac_address: 1>, 'parameter': b''} (seq=44)
2024-03-17 20:46:59.523 a0d7b954-ssh zigpy_deconz.uart DEBUG Send: 0a2c000800010001
2024-03-17 20:46:59.523 a0d7b954-ssh zigpy_deconz.zigbee.application DEBUG Sending packet: ZigbeePacket(timestamp=datetime.datetime(2024, 3, 17, 19, 46, 59, 523502, tzinfo=datetime.timezone.utc), src=AddrModeAddress(addr_mode=<AddrMode.NWK: 2>, address=0xFFFE), src_ep=0, dst=AddrModeAddress(addr_mode=<AddrMode.Broadcast: 15>, address=<BroadcastAddress.RX_ON_WHEN_IDLE: 65533>), dst_ep=0, source_route=None, extended_timeout=False, tsn=19, profile_id=0, cluster_id=<ZDOCmd.IEEE_addr_req: 0x0001>, data=Serialized[b'\x13n\xdd\x00\x00'], tx_options=<TransmitOptions.NONE: 0>, radius=0, non_member_radius=0, lqi=None, rssi=None)
2024-03-17 20:46:59.537 a0d7b954-ssh zigpy_deconz.uart DEBUG Frame received: 0x0a2c001000090001783c09ffff2e2100
2024-03-17 20:46:59.537 a0d7b954-ssh zigpy_deconz.api DEBUG Received command CommandId.read_parameter{'status': <Status.SUCCESS: 0>, 'frame_length': 16, 'payload_length': 9, 'parameter_id': <NetworkParameter.mac_address: 1>, 'parameter': b'x<\t\xff\xff.!\x00'} (seq 44)
2024-03-17 20:46:59.537 a0d7b954-ssh zigpy_deconz.uart DEBUG Frame received: 0x0e2d0007002a00
2024-03-17 20:46:59.538 a0d7b954-ssh zigpy_deconz.api DEBUG Received command CommandId.device_state_changed{'status': <Status.SUCCESS: 0>, 'frame_length': 7, 'device_state': DeviceState(network_state=<NetworkState2.CONNECTED: 2>, device_state=<DeviceStateFlags.APSDE_DATA_INDICATION|APSDE_DATA_REQUEST_FREE_SLOTS_AVAILABLE: 10>), 'reserved': 0} (seq 45)
2024-03-17 20:46:59.538 a0d7b954-ssh zigpy_deconz.api DEBUG Read parameter mac_address(None)=00:21:2e:ff:ff:09:3c:78
2024-03-17 20:46:59.539 a0d7b954-ssh zigpy_deconz.api DEBUG Sending CommandId.aps_data_indication{'flags': <DataIndicationFlags.Always_Use_NWK_Source_Addr: 1>} (seq=45)
2024-03-17 20:46:59.539 a0d7b954-ssh zigpy_deconz.uart DEBUG Send: 172d000800010001
2024-03-17 20:46:59.553 a0d7b954-ssh zigpy_deconz.uart DEBUG Frame received: 0x172d0026001f002a02000001026edd0204010004080008450a00002139350000bd00000000bd
2024-03-17 20:46:59.554 a0d7b954-ssh zigpy_deconz.api DEBUG Received command CommandId.aps_data_indication{'status': <Status.SUCCESS: 0>, 'frame_length': 38, 'payload_length': 31, 'device_state': DeviceState(network_state=<NetworkState2.CONNECTED: 2>, device_state=<DeviceStateFlags.APSDE_DATA_INDICATION|APSDE_DATA_REQUEST_FREE_SLOTS_AVAILABLE: 10>), 'dst_addr': DeconzAddress(address_mode=<AddressMode.NWK: 2>, address=0x0000), 'dst_ep': 1, 'src_addr': DeconzAddress(address_mode=<AddressMode.NWK: 2>, address=0xDD6E), 'src_ep': 2, 'profile_id': 260, 'cluster_id': 1024, 'asdu': b'\x08E\n\x00\x00!95', 'reserved1': 0, 'reserved2': 0, 'lqi': 189, 'reserved3': 0, 'reserved4': 0, 'reserved5': 0, 'reserved6': 0, 'rssi': -67} (seq 45)
2024-03-17 20:46:59.554 a0d7b954-ssh zigpy.application DEBUG Received a packet: ZigbeePacket(timestamp=datetime.datetime(2024, 3, 17, 19, 46, 59, 554836, tzinfo=datetime.timezone.utc), src=AddrModeAddress(addr_mode=<AddrMode.NWK: 2>, address=0xDD6E), src_ep=2, dst=AddrModeAddress(addr_mode=<AddrMode.NWK: 2>, address=0x0000), dst_ep=1, source_route=None, extended_timeout=False, tsn=None, profile_id=260, cluster_id=1024, data=Serialized[b'\x08E\n\x00\x00!95'], tx_options=<TransmitOptions.NONE: 0>, radius=0, non_member_radius=0, lqi=189, rssi=-67)
2024-03-17 20:46:59.554 a0d7b954-ssh zigpy.application WARNING Unknown device AddrModeAddress(addr_mode=<AddrMode.NWK: 2>, address=0xDD6E)
2024-03-17 20:46:59.555 a0d7b954-ssh zigpy_deconz.api DEBUG Sending CommandId.read_parameter{'parameter_id': <NetworkParameter.aps_designed_coordinator: 9>, 'parameter': b''} (seq=46)
2024-03-17 20:46:59.555 a0d7b954-ssh zigpy_deconz.uart DEBUG Send: 0a2e000800010009
2024-03-17 20:46:59.555 a0d7b954-ssh zigpy_deconz.zigbee.application DEBUG Sending packet: ZigbeePacket(timestamp=datetime.datetime(2024, 3, 17, 19, 46, 59, 555821, tzinfo=datetime.timezone.utc), src=AddrModeAddress(addr_mode=<AddrMode.NWK: 2>, address=0xFFFE), src_ep=0, dst=AddrModeAddress(addr_mode=<AddrMode.Broadcast: 15>, address=<BroadcastAddress.RX_ON_WHEN_IDLE: 65533>), dst_ep=0, source_route=None, extended_timeout=False, tsn=21, profile_id=0, cluster_id=<ZDOCmd.IEEE_addr_req: 0x0001>, data=Serialized[b'\x15n\xdd\x00\x00'], tx_options=<TransmitOptions.NONE: 0>, radius=0, non_member_radius=0, lqi=None, rssi=None)
2024-03-17 20:46:59.569 a0d7b954-ssh zigpy_deconz.uart DEBUG Frame received: 0x0a2e00090002000901
2024-03-17 20:46:59.569 a0d7b954-ssh zigpy_deconz.api DEBUG Received command CommandId.read_parameter{'status': <Status.SUCCESS: 0>, 'frame_length': 9, 'payload_length': 2, 'parameter_id': <NetworkParameter.aps_designed_coordinator: 9>, 'parameter': b'\x01'} (seq 46)
2024-03-17 20:46:59.569 a0d7b954-ssh zigpy_deconz.api DEBUG Read parameter aps_designed_coordinator(None)=1
2024-03-17 20:46:59.570 a0d7b954-ssh zigpy_deconz.api DEBUG Sending CommandId.aps_data_indication{'flags': <DataIndicationFlags.Always_Use_NWK_Source_Addr: 1>} (seq=47)
2024-03-17 20:46:59.570 a0d7b954-ssh zigpy_deconz.uart DEBUG Send: 172f000800010001
2024-03-17 20:46:59.585 a0d7b954-ssh zigpy_deconz.uart DEBUG Frame received: 0x172f0025001e002a02ffffff026edd0204010604070018460a000018010000be00000000be
2024-03-17 20:46:59.586 a0d7b954-ssh zigpy_deconz.api DEBUG Received command CommandId.aps_data_indication{'status': <Status.SUCCESS: 0>, 'frame_length': 37, 'payload_length': 30, 'device_state': DeviceState(network_state=<NetworkState2.CONNECTED: 2>, device_state=<DeviceStateFlags.APSDE_DATA_INDICATION|APSDE_DATA_REQUEST_FREE_SLOTS_AVAILABLE: 10>), 'dst_addr': DeconzAddress(address_mode=<AddressMode.NWK: 2>, address=0xFFFF), 'dst_ep': 255, 'src_addr': DeconzAddress(address_mode=<AddressMode.NWK: 2>, address=0xDD6E), 'src_ep': 2, 'profile_id': 260, 'cluster_id': 1030, 'asdu': b'\x18F\n\x00\x00\x18\x01', 'reserved1': 0, 'reserved2': 0, 'lqi': 190, 'reserved3': 0, 'reserved4': 0, 'reserved5': 0, 'reserved6': 0, 'rssi': -66} (seq 47)
2024-03-17 20:46:59.586 a0d7b954-ssh zigpy.application DEBUG Received a packet: ZigbeePacket(timestamp=datetime.datetime(2024, 3, 17, 19, 46, 59, 586555, tzinfo=datetime.timezone.utc), src=AddrModeAddress(addr_mode=<AddrMode.NWK: 2>, address=0xDD6E), src_ep=2, dst=AddrModeAddress(addr_mode=<AddrMode.Broadcast: 15>, address=<BroadcastAddress.ALL_DEVICES: 65535>), dst_ep=255, source_route=None, extended_timeout=False, tsn=None, profile_id=260, cluster_id=1030, data=Serialized[b'\x18F\n\x00\x00\x18\x01'], tx_options=<TransmitOptions.NONE: 0>, radius=0, non_member_radius=0, lqi=190, rssi=-66)
2024-03-17 20:46:59.586 a0d7b954-ssh zigpy.application WARNING Unknown device AddrModeAddress(addr_mode=<AddrMode.NWK: 2>, address=0xDD6E)
2024-03-17 20:46:59.587 a0d7b954-ssh zigpy_deconz.api DEBUG Sending CommandId.read_parameter{'parameter_id': <NetworkParameter.nwk_address: 7>, 'parameter': b''} (seq=48)
2024-03-17 20:46:59.587 a0d7b954-ssh zigpy_deconz.uart DEBUG Send: 0a30000800010007
2024-03-17 20:46:59.587 a0d7b954-ssh zigpy_deconz.zigbee.application DEBUG Sending packet: ZigbeePacket(timestamp=datetime.datetime(2024, 3, 17, 19, 46, 59, 587466, tzinfo=datetime.timezone.utc), src=AddrModeAddress(addr_mode=<AddrMode.NWK: 2>, address=0xFFFE), src_ep=0, dst=AddrModeAddress(addr_mode=<AddrMode.Broadcast: 15>, address=<BroadcastAddress.RX_ON_WHEN_IDLE: 65533>), dst_ep=0, source_route=None, extended_timeout=False, tsn=23, profile_id=0, cluster_id=<ZDOCmd.IEEE_addr_req: 0x0001>, data=Serialized[b'\x17n\xdd\x00\x00'], tx_options=<TransmitOptions.NONE: 0>, radius=0, non_member_radius=0, lqi=None, rssi=None)
2024-03-17 20:46:59.601 a0d7b954-ssh zigpy_deconz.uart DEBUG Frame received: 0x0a30000a000300070000
2024-03-17 20:46:59.601 a0d7b954-ssh zigpy_deconz.api DEBUG Received command CommandId.read_parameter{'status': <Status.SUCCESS: 0>, 'frame_length': 10, 'payload_length': 3, 'parameter_id': <NetworkParameter.nwk_address: 7>, 'parameter': b'\x00\x00'} (seq 48)
2024-03-17 20:46:59.601 a0d7b954-ssh zigpy_deconz.api DEBUG Read parameter nwk_address(None)=0x0000
2024-03-17 20:46:59.605 a0d7b954-ssh zigpy_deconz.api DEBUG Sending CommandId.aps_data_indication{'flags': <DataIndicationFlags.Always_Use_NWK_Source_Addr: 1>} (seq=49)
2024-03-17 20:46:59.605 a0d7b954-ssh zigpy_deconz.uart DEBUG Send: 1731000800010001
2024-03-17 20:46:59.617 a0d7b954-ssh zigpy_deconz.uart DEBUG Frame received: 0x17310026001f002a02ffffff026edd0204010004080018470a00002139350000bf00000000bf
2024-03-17 20:46:59.618 a0d7b954-ssh zigpy_deconz.api DEBUG Received command CommandId.aps_data_indication{'status': <Status.SUCCESS: 0>, 'frame_length': 38, 'payload_length': 31, 'device_state': DeviceState(network_state=<NetworkState2.CONNECTED: 2>, device_state=<DeviceStateFlags.APSDE_DATA_INDICATION|APSDE_DATA_REQUEST_FREE_SLOTS_AVAILABLE: 10>), 'dst_addr': DeconzAddress(address_mode=<AddressMode.NWK: 2>, address=0xFFFF), 'dst_ep': 255, 'src_addr': DeconzAddress(address_mode=<AddressMode.NWK: 2>, address=0xDD6E), 'src_ep': 2, 'profile_id': 260, 'cluster_id': 1024, 'asdu': b'\x18G\n\x00\x00!95', 'reserved1': 0, 'reserved2': 0, 'lqi': 191, 'reserved3': 0, 'reserved4': 0, 'reserved5': 0, 'reserved6': 0, 'rssi': -65} (seq 49)
2024-03-17 20:46:59.618 a0d7b954-ssh zigpy.application DEBUG Received a packet: ZigbeePacket(timestamp=datetime.datetime(2024, 3, 17, 19, 46, 59, 618622, tzinfo=datetime.timezone.utc), src=AddrModeAddress(addr_mode=<AddrMode.NWK: 2>, address=0xDD6E), src_ep=2, dst=AddrModeAddress(addr_mode=<AddrMode.Broadcast: 15>, address=<BroadcastAddress.ALL_DEVICES: 65535>), dst_ep=255, source_route=None, extended_timeout=False, tsn=None, profile_id=260, cluster_id=1024, data=Serialized[b'\x18G\n\x00\x00!95'], tx_options=<TransmitOptions.NONE: 0>, radius=0, non_member_radius=0, lqi=191, rssi=-65)
2024-03-17 20:46:59.618 a0d7b954-ssh zigpy.application WARNING Unknown device AddrModeAddress(addr_mode=<AddrMode.NWK: 2>, address=0xDD6E)
2024-03-17 20:46:59.619 a0d7b954-ssh zigpy_deconz.api DEBUG Sending CommandId.read_parameter{'parameter_id': <NetworkParameter.nwk_panid: 5>, 'parameter': b''} (seq=50)
2024-03-17 20:46:59.619 a0d7b954-ssh zigpy_deconz.uart DEBUG Send: 0a32000800010005
2024-03-17 20:46:59.619 a0d7b954-ssh zigpy_deconz.zigbee.application DEBUG Sending packet: ZigbeePacket(timestamp=datetime.datetime(2024, 3, 17, 19, 46, 59, 619496, tzinfo=datetime.timezone.utc), src=AddrModeAddress(addr_mode=<AddrMode.NWK: 2>, address=0x0000), src_ep=0, dst=AddrModeAddress(addr_mode=<AddrMode.Broadcast: 15>, address=<BroadcastAddress.RX_ON_WHEN_IDLE: 65533>), dst_ep=0, source_route=None, extended_timeout=False, tsn=25, profile_id=0, cluster_id=<ZDOCmd.IEEE_addr_req: 0x0001>, data=Serialized[b'\x19n\xdd\x00\x00'], tx_options=<TransmitOptions.NONE: 0>, radius=0, non_member_radius=0, lqi=None, rssi=None)
2024-03-17 20:46:59.633 a0d7b954-ssh zigpy_deconz.uart DEBUG Frame received: 0x0a32000a00030005621a
2024-03-17 20:46:59.633 a0d7b954-ssh zigpy_deconz.api DEBUG Received command CommandId.read_parameter{'status': <Status.SUCCESS: 0>, 'frame_length': 10, 'payload_length': 3, 'parameter_id': <NetworkParameter.nwk_panid: 5>, 'parameter': b'b\x1a'} (seq 50)
2024-03-17 20:46:59.634 a0d7b954-ssh zigpy_deconz.api DEBUG Read parameter nwk_panid(None)=0x1A62
2024-03-17 20:46:59.634 a0d7b954-ssh zigpy_deconz.api DEBUG Sending CommandId.aps_data_indication{'flags': <DataIndicationFlags.Always_Use_NWK_Source_Addr: 1>} (seq=51)
2024-03-17 20:46:59.634 a0d7b954-ssh zigpy_deconz.uart DEBUG Send: 1733000800010001
2024-03-17 20:46:59.649 a0d7b954-ssh zigpy_deconz.uart DEBUG Frame received: 0x1733002a0023002a0200000102b32b0b040119000c00017001004f121514013001190000b700000000b7
2024-03-17 20:46:59.650 a0d7b954-ssh zigpy_deconz.api DEBUG Received command CommandId.aps_data_indication{'status': <Status.SUCCESS: 0>, 'frame_length': 42, 'payload_length': 35, 'device_state': DeviceState(network_state=<NetworkState2.CONNECTED: 2>, device_state=<DeviceStateFlags.APSDE_DATA_INDICATION|APSDE_DATA_REQUEST_FREE_SLOTS_AVAILABLE: 10>), 'dst_addr': DeconzAddress(address_mode=<AddressMode.NWK: 2>, address=0x0000), 'dst_ep': 1, 'src_addr': DeconzAddress(address_mode=<AddressMode.NWK: 2>, address=0x2BB3), 'src_ep': 11, 'profile_id': 260, 'cluster_id': 25, 'asdu': b'\x01p\x01\x00O\x12\x15\x14\x010\x01\x19', 'reserved1': 0, 'reserved2': 0, 'lqi': 183, 'reserved3': 0, 'reserved4': 0, 'reserved5': 0, 'reserved6': 0, 'rssi': -73} (seq 51)
2024-03-17 20:46:59.650 a0d7b954-ssh zigpy.application DEBUG Received a packet: ZigbeePacket(timestamp=datetime.datetime(2024, 3, 17, 19, 46, 59, 650601, tzinfo=datetime.timezone.utc), src=AddrModeAddress(addr_mode=<AddrMode.NWK: 2>, address=0x2BB3), src_ep=11, dst=AddrModeAddress(addr_mode=<AddrMode.NWK: 2>, address=0x0000), dst_ep=1, source_route=None, extended_timeout=False, tsn=None, profile_id=260, cluster_id=25, data=Serialized[b'\x01p\x01\x00O\x12\x15\x14\x010\x01\x19'], tx_options=<TransmitOptions.NONE: 0>, radius=0, non_member_radius=0, lqi=183, rssi=-73)
2024-03-17 20:46:59.650 a0d7b954-ssh zigpy.application WARNING Unknown device AddrModeAddress(addr_mode=<AddrMode.NWK: 2>, address=0x2BB3)
2024-03-17 20:46:59.651 a0d7b954-ssh zigpy_deconz.api DEBUG Sending CommandId.read_parameter{'parameter_id': <NetworkParameter.aps_extended_panid: 11>, 'parameter': b''} (seq=52)
2024-03-17 20:46:59.651 a0d7b954-ssh zigpy_deconz.uart DEBUG Send: 0a3400080001000b
2024-03-17 20:46:59.651 a0d7b954-ssh zigpy_deconz.zigbee.application DEBUG Sending packet: ZigbeePacket(timestamp=datetime.datetime(2024, 3, 17, 19, 46, 59, 651544, tzinfo=datetime.timezone.utc), src=AddrModeAddress(addr_mode=<AddrMode.NWK: 2>, address=0x0000), src_ep=0, dst=AddrModeAddress(addr_mode=<AddrMode.Broadcast: 15>, address=<BroadcastAddress.RX_ON_WHEN_IDLE: 65533>), dst_ep=0, source_route=None, extended_timeout=False, tsn=27, profile_id=0, cluster_id=<ZDOCmd.IEEE_addr_req: 0x0001>, data=Serialized[b'\x1b\xb3+\x00\x00'], tx_options=<TransmitOptions.NONE: 0>, radius=0, non_member_radius=0, lqi=None, rssi=None)
2024-03-17 20:46:59.665 a0d7b954-ssh zigpy_deconz.uart DEBUG Frame received: 0x0a3400100009000bdddddddddddddddd
2024-03-17 20:46:59.665 a0d7b954-ssh zigpy_deconz.api DEBUG Received command CommandId.read_parameter{'status': <Status.SUCCESS: 0>, 'frame_length': 16, 'payload_length': 9, 'parameter_id': <NetworkParameter.aps_extended_panid: 11>, 'parameter': b'\xdd\xdd\xdd\xdd\xdd\xdd\xdd\xdd'} (seq 52)
2024-03-17 20:46:59.666 a0d7b954-ssh zigpy_deconz.api DEBUG Read parameter aps_extended_panid(None)=dd:dd:dd:dd:dd:dd:dd:dd
2024-03-17 20:46:59.666 a0d7b954-ssh zigpy_deconz.api DEBUG Sending CommandId.aps_data_indication{'flags': <DataIndicationFlags.Always_Use_NWK_Source_Addr: 1>} (seq=53)
2024-03-17 20:46:59.666 a0d7b954-ssh zigpy_deconz.uart DEBUG Send: 1735000800010001
2024-03-17 20:46:59.681 a0d7b954-ssh zigpy_deconz.uart DEBUG Frame received: 0x1735002a0023002a020000010298db0b040119000c00016a01004f121514013001190000c000000000c0
2024-03-17 20:46:59.682 a0d7b954-ssh zigpy_deconz.api DEBUG Received command CommandId.aps_data_indication{'status': <Status.SUCCESS: 0>, 'frame_length': 42, 'payload_length': 35, 'device_state': DeviceState(network_state=<NetworkState2.CONNECTED: 2>, device_state=<DeviceStateFlags.APSDE_DATA_INDICATION|APSDE_DATA_REQUEST_FREE_SLOTS_AVAILABLE: 10>), 'dst_addr': DeconzAddress(address_mode=<AddressMode.NWK: 2>, address=0x0000), 'dst_ep': 1, 'src_addr': DeconzAddress(address_mode=<AddressMode.NWK: 2>, address=0xDB98), 'src_ep': 11, 'profile_id': 260, 'cluster_id': 25, 'asdu': b'\x01j\x01\x00O\x12\x15\x14\x010\x01\x19', 'reserved1': 0, 'reserved2': 0, 'lqi': 192, 'reserved3': 0, 'reserved4': 0, 'reserved5': 0, 'reserved6': 0, 'rssi': -64} (seq 53)
2024-03-17 20:46:59.682 a0d7b954-ssh zigpy.application DEBUG Received a packet: ZigbeePacket(timestamp=datetime.datetime(2024, 3, 17, 19, 46, 59, 682594, tzinfo=datetime.timezone.utc), src=AddrModeAddress(addr_mode=<AddrMode.NWK: 2>, address=0xDB98), src_ep=11, dst=AddrModeAddress(addr_mode=<AddrMode.NWK: 2>, address=0x0000), dst_ep=1, source_route=None, extended_timeout=False, tsn=None, profile_id=260, cluster_id=25, data=Serialized[b'\x01j\x01\x00O\x12\x15\x14\x010\x01\x19'], tx_options=<TransmitOptions.NONE: 0>, radius=0, non_member_radius=0, lqi=192, rssi=-64)
2024-03-17 20:46:59.682 a0d7b954-ssh zigpy.application WARNING Unknown device AddrModeAddress(addr_mode=<AddrMode.NWK: 2>, address=0xDB98)
2024-03-17 20:46:59.683 a0d7b954-ssh zigpy_deconz.api DEBUG Sending CommandId.read_parameter{'parameter_id': <NetworkParameter.current_channel: 28>, 'parameter': b''} (seq=54)
2024-03-17 20:46:59.683 a0d7b954-ssh zigpy_deconz.uart DEBUG Send: 0a3600080001001c
2024-03-17 20:46:59.683 a0d7b954-ssh zigpy_deconz.zigbee.application DEBUG Sending packet: ZigbeePacket(timestamp=datetime.datetime(2024, 3, 17, 19, 46, 59, 683476, tzinfo=datetime.timezone.utc), src=AddrModeAddress(addr_mode=<AddrMode.NWK: 2>, address=0x0000), src_ep=0, dst=AddrModeAddress(addr_mode=<AddrMode.Broadcast: 15>, address=<BroadcastAddress.RX_ON_WHEN_IDLE: 65533>), dst_ep=0, source_route=None, extended_timeout=False, tsn=29, profile_id=0, cluster_id=<ZDOCmd.IEEE_addr_req: 0x0001>, data=Serialized[b'\x1d\x98\xdb\x00\x00'], tx_options=<TransmitOptions.NONE: 0>, radius=0, non_member_radius=0, lqi=None, rssi=None)
2024-03-17 20:46:59.697 a0d7b954-ssh zigpy_deconz.uart DEBUG Frame received: 0x0a3600090002001c0b
2024-03-17 20:46:59.697 a0d7b954-ssh zigpy_deconz.api DEBUG Received command CommandId.read_parameter{'status': <Status.SUCCESS: 0>, 'frame_length': 9, 'payload_length': 2, 'parameter_id': <NetworkParameter.current_channel: 28>, 'parameter': b'\x0b'} (seq 54)
2024-03-17 20:46:59.698 a0d7b954-ssh zigpy_deconz.api DEBUG Read parameter current_channel(None)=11
2024-03-17 20:46:59.698 a0d7b954-ssh zigpy_deconz.api DEBUG Sending CommandId.aps_data_indication{'flags': <DataIndicationFlags.Always_Use_NWK_Source_Addr: 1>} (seq=55)
2024-03-17 20:46:59.698 a0d7b954-ssh zigpy_deconz.uart DEBUG Send: 1737000800010001
2024-03-17 20:46:59.713 a0d7b954-ssh zigpy_deconz.uart DEBUG Frame received: 0x1737002a002300220200000102ac7502040119000c0001ec01000b100d01b76b00420000c000000000c0
2024-03-17 20:46:59.714 a0d7b954-ssh zigpy_deconz.api DEBUG Received command CommandId.aps_data_indication{'status': <Status.SUCCESS: 0>, 'frame_length': 42, 'payload_length': 35, 'device_state': DeviceState(network_state=<NetworkState2.CONNECTED: 2>, device_state=<DeviceStateFlags.APSDE_DATA_REQUEST_FREE_SLOTS_AVAILABLE: 8>), 'dst_addr': DeconzAddress(address_mode=<AddressMode.NWK: 2>, address=0x0000), 'dst_ep': 1, 'src_addr': DeconzAddress(address_mode=<AddressMode.NWK: 2>, address=0x75AC), 'src_ep': 2, 'profile_id': 260, 'cluster_id': 25, 'asdu': b'\x01\xec\x01\x00\x0b\x10\r\x01\xb7k\x00B', 'reserved1': 0, 'reserved2': 0, 'lqi': 192, 'reserved3': 0, 'reserved4': 0, 'reserved5': 0, 'reserved6': 0, 'rssi': -64} (seq 55)
2024-03-17 20:46:59.714 a0d7b954-ssh zigpy.application DEBUG Received a packet: ZigbeePacket(timestamp=datetime.datetime(2024, 3, 17, 19, 46, 59, 714736, tzinfo=datetime.timezone.utc), src=AddrModeAddress(addr_mode=<AddrMode.NWK: 2>, address=0x75AC), src_ep=2, dst=AddrModeAddress(addr_mode=<AddrMode.NWK: 2>, address=0x0000), dst_ep=1, source_route=None, extended_timeout=False, tsn=None, profile_id=260, cluster_id=25, data=Serialized[b'\x01\xec\x01\x00\x0b\x10\r\x01\xb7k\x00B'], tx_options=<TransmitOptions.NONE: 0>, radius=0, non_member_radius=0, lqi=192, rssi=-64)
2024-03-17 20:46:59.714 a0d7b954-ssh zigpy.application WARNING Unknown device AddrModeAddress(addr_mode=<AddrMode.NWK: 2>, address=0x75AC)
2024-03-17 20:46:59.715 a0d7b954-ssh zigpy_deconz.api DEBUG Sending CommandId.read_parameter{'parameter_id': <NetworkParameter.channel_mask: 10>, 'parameter': b''} (seq=56)
2024-03-17 20:46:59.715 a0d7b954-ssh zigpy_deconz.uart DEBUG Send: 0a3800080001000a
2024-03-17 20:46:59.715 a0d7b954-ssh zigpy_deconz.zigbee.application DEBUG Sending packet: ZigbeePacket(timestamp=datetime.datetime(2024, 3, 17, 19, 46, 59, 715548, tzinfo=datetime.timezone.utc), src=AddrModeAddress(addr_mode=<AddrMode.NWK: 2>, address=0x0000), src_ep=0, dst=AddrModeAddress(addr_mode=<AddrMode.Broadcast: 15>, address=<BroadcastAddress.RX_ON_WHEN_IDLE: 65533>), dst_ep=0, source_route=None, extended_timeout=False, tsn=31, profile_id=0, cluster_id=<ZDOCmd.IEEE_addr_req: 0x0001>, data=Serialized[b'\x1f\xacu\x00\x00'], tx_options=<TransmitOptions.NONE: 0>, radius=0, non_member_radius=0, lqi=None, rssi=None)
2024-03-17 20:46:59.715 a0d7b954-ssh zigpy.application DEBUG Max concurrency (8) reached, delaying request (0 enqueued)
2024-03-17 20:46:59.729 a0d7b954-ssh zigpy_deconz.uart DEBUG Frame received: 0x0a38000c0005000a00080000
2024-03-17 20:46:59.729 a0d7b954-ssh zigpy_deconz.api DEBUG Received command CommandId.read_parameter{'status': <Status.SUCCESS: 0>, 'frame_length': 12, 'payload_length': 5, 'parameter_id': <NetworkParameter.channel_mask: 10>, 'parameter': b'\x00\x08\x00\x00'} (seq 56)
2024-03-17 20:46:59.730 a0d7b954-ssh zigpy_deconz.api DEBUG Read parameter channel_mask(None)=<Channels.CHANNEL_11: 2048>
2024-03-17 20:46:59.730 a0d7b954-ssh zigpy_deconz.api DEBUG Sending CommandId.aps_data_request{'request_id': 16, 'flags': <DeconzSendDataFlags.NONE: 0>, 'dst': DeconzAddressEndpoint(address_mode=<AddressMode.NWK: 2>, address=0xFFFD, endpoint=0), 'profile_id': 0, 'cluster_id': <ZDOCmd.IEEE_addr_req: 0x0001>, 'src_ep': 0, 'asdu': b'\x0f\xec\x1d\x00\x00', 'tx_options': <DeconzTransmitOptions.USE_NWK_KEY_SECURITY: 2>, 'radius': 0, 'relays': None} (seq=57)
2024-03-17 20:46:59.730 a0d7b954-ssh zigpy_deconz.uart DEBUG Send: 1239001b001400100002fdff00000001000005000fec1d00000200
2024-03-17 20:46:59.745 a0d7b954-ssh zigpy_deconz.uart DEBUG Frame received: 0x123900090002002210
2024-03-17 20:46:59.745 a0d7b954-ssh zigpy_deconz.api DEBUG Received command CommandId.aps_data_request{'status': <Status.SUCCESS: 0>, 'frame_length': 9, 'payload_length': 2, 'device_state': DeviceState(network_state=<NetworkState2.CONNECTED: 2>, device_state=<DeviceStateFlags.APSDE_DATA_REQUEST_FREE_SLOTS_AVAILABLE: 8>), 'request_id': 16} (seq 57)
2024-03-17 20:46:59.746 a0d7b954-ssh zigpy_deconz.api DEBUG Sending CommandId.read_parameter{'parameter_id': <NetworkParameter.nwk_update_id: 36>, 'parameter': b''} (seq=58)
2024-03-17 20:46:59.746 a0d7b954-ssh zigpy_deconz.uart DEBUG Send: 0a3a000800010024
2024-03-17 20:46:59.761 a0d7b954-ssh zigpy_deconz.uart DEBUG Frame received: 0x0a3a00090002002400
2024-03-17 20:46:59.761 a0d7b954-ssh zigpy_deconz.api DEBUG Received command CommandId.read_parameter{'status': <Status.SUCCESS: 0>, 'frame_length': 9, 'payload_length': 2, 'parameter_id': <NetworkParameter.nwk_update_id: 36>, 'parameter': b'\x00'} (seq 58)
2024-03-17 20:46:59.762 a0d7b954-ssh zigpy_deconz.api DEBUG Read parameter nwk_update_id(None)=0
2024-03-17 20:46:59.762 a0d7b954-ssh zigpy_deconz.api DEBUG Sending CommandId.aps_data_request{'request_id': 18, 'flags': <DeconzSendDataFlags.NONE: 0>, 'dst': DeconzAddressEndpoint(address_mode=<AddressMode.NWK: 2>, address=0xFFFD, endpoint=0), 'profile_id': 0, 'cluster_id': <ZDOCmd.IEEE_addr_req: 0x0001>, 'src_ep': 0, 'asdu': b'\x116_\x00\x00', 'tx_options': <DeconzTransmitOptions.USE_NWK_KEY_SECURITY: 2>, 'radius': 0, 'relays': None} (seq=59)
2024-03-17 20:46:59.762 a0d7b954-ssh zigpy_deconz.uart DEBUG Send: 123b001b001400120002fdff000000010000050011365f00000200
2024-03-17 20:46:59.777 a0d7b954-ssh zigpy_deconz.uart DEBUG Frame received: 0x123b00090002002212
2024-03-17 20:46:59.777 a0d7b954-ssh zigpy_deconz.api DEBUG Received command CommandId.aps_data_request{'status': <Status.SUCCESS: 0>, 'frame_length': 9, 'payload_length': 2, 'device_state': DeviceState(network_state=<NetworkState2.CONNECTED: 2>, device_state=<DeviceStateFlags.APSDE_DATA_REQUEST_FREE_SLOTS_AVAILABLE: 8>), 'request_id': 18} (seq 59)
2024-03-17 20:46:59.778 a0d7b954-ssh zigpy_deconz.api DEBUG Sending CommandId.read_parameter{'parameter_id': <NetworkParameter.network_key: 24>, 'parameter': b'\x00'} (seq=60)
2024-03-17 20:46:59.778 a0d7b954-ssh zigpy_deconz.uart DEBUG Send: 0a3c00090002001800
2024-03-17 20:46:59.793 a0d7b954-ssh zigpy_deconz.uart DEBUG Frame received: 0x0a3c0019001200180001030507090b0d0f00020406080a0c0d
2024-03-17 20:46:59.793 a0d7b954-ssh zigpy_deconz.api DEBUG Received command CommandId.read_parameter{'status': <Status.SUCCESS: 0>, 'frame_length': 25, 'payload_length': 18, 'parameter_id': <NetworkParameter.network_key: 24>, 'parameter': b'\x00\x01\x03\x05\x07\t\x0b\r\x0f\x00\x02\x04\x06\x08\n\x0c\r'} (seq 60)
2024-03-17 20:46:59.794 a0d7b954-ssh zigpy_deconz.api DEBUG Read parameter network_key(0)=IndexedKey(index=0, key=01:03:05:07:09:0b:0d:0f:00:02:04:06:08:0a:0c:0d)
2024-03-17 20:46:59.794 a0d7b954-ssh zigpy_deconz.api DEBUG Sending CommandId.aps_data_request{'request_id': 20, 'flags': <DeconzSendDataFlags.NONE: 0>, 'dst': DeconzAddressEndpoint(address_mode=<AddressMode.NWK: 2>, address=0xFFFD, endpoint=0), 'profile_id': 0, 'cluster_id': <ZDOCmd.IEEE_addr_req: 0x0001>, 'src_ep': 0, 'asdu': b'\x13n\xdd\x00\x00', 'tx_options': <DeconzTransmitOptions.USE_NWK_KEY_SECURITY: 2>, 'radius': 0, 'relays': None} (seq=61)
2024-03-17 20:46:59.794 a0d7b954-ssh zigpy_deconz.uart DEBUG Send: 123d001b001400140002fdff0000000100000500136edd00000200
2024-03-17 20:46:59.809 a0d7b954-ssh zigpy_deconz.uart DEBUG Frame received: 0x123d00090002002214
2024-03-17 20:46:59.809 a0d7b954-ssh zigpy_deconz.api DEBUG Received command CommandId.aps_data_request{'status': <Status.SUCCESS: 0>, 'frame_length': 9, 'payload_length': 2, 'device_state': DeviceState(network_state=<NetworkState2.CONNECTED: 2>, device_state=<DeviceStateFlags.APSDE_DATA_REQUEST_FREE_SLOTS_AVAILABLE: 8>), 'request_id': 20} (seq 61)
2024-03-17 20:46:59.810 a0d7b954-ssh zigpy_deconz.api DEBUG Sending CommandId.read_parameter{'parameter_id': <NetworkParameter.nwk_frame_counter: 39>, 'parameter': b''} (seq=62)
2024-03-17 20:46:59.810 a0d7b954-ssh zigpy_deconz.uart DEBUG Send: 0a3e000800010027
2024-03-17 20:46:59.825 a0d7b954-ssh zigpy_deconz.uart DEBUG Frame received: 0x0a3e000c00050027ebc2b900
2024-03-17 20:46:59.825 a0d7b954-ssh zigpy_deconz.api DEBUG Received command CommandId.read_parameter{'status': <Status.SUCCESS: 0>, 'frame_length': 12, 'payload_length': 5, 'parameter_id': <NetworkParameter.nwk_frame_counter: 39>, 'parameter': b'\xeb\xc2\xb9\x00'} (seq 62)
2024-03-17 20:46:59.826 a0d7b954-ssh zigpy_deconz.api DEBUG Read parameter nwk_frame_counter(None)=12174059
2024-03-17 20:46:59.826 a0d7b954-ssh zigpy_deconz.api DEBUG Sending CommandId.aps_data_request{'request_id': 22, 'flags': <DeconzSendDataFlags.NONE: 0>, 'dst': DeconzAddressEndpoint(address_mode=<AddressMode.NWK: 2>, address=0xFFFD, endpoint=0), 'profile_id': 0, 'cluster_id': <ZDOCmd.IEEE_addr_req: 0x0001>, 'src_ep': 0, 'asdu': b'\x15n\xdd\x00\x00', 'tx_options': <DeconzTransmitOptions.USE_NWK_KEY_SECURITY: 2>, 'radius': 0, 'relays': None} (seq=63)
2024-03-17 20:46:59.826 a0d7b954-ssh zigpy_deconz.uart DEBUG Send: 123f001b001400160002fdff0000000100000500156edd00000200
2024-03-17 20:46:59.841 a0d7b954-ssh zigpy_deconz.uart DEBUG Frame received: 0x123f00090002002216
2024-03-17 20:46:59.841 a0d7b954-ssh zigpy_deconz.api DEBUG Received command CommandId.aps_data_request{'status': <Status.SUCCESS: 0>, 'frame_length': 9, 'payload_length': 2, 'device_state': DeviceState(network_state=<NetworkState2.CONNECTED: 2>, device_state=<DeviceStateFlags.APSDE_DATA_REQUEST_FREE_SLOTS_AVAILABLE: 8>), 'request_id': 22} (seq 63)
2024-03-17 20:46:59.842 a0d7b954-ssh zigpy_deconz.api DEBUG Sending CommandId.read_parameter{'parameter_id': <NetworkParameter.trust_center_address: 14>, 'parameter': b''} (seq=64)
2024-03-17 20:46:59.842 a0d7b954-ssh zigpy_deconz.uart DEBUG Send: 0a4000080001000e
2024-03-17 20:46:59.857 a0d7b954-ssh zigpy_deconz.uart DEBUG Frame received: 0x0a4000100009000e783c09ffff2e2100
2024-03-17 20:46:59.857 a0d7b954-ssh zigpy_deconz.api DEBUG Received command CommandId.read_parameter{'status': <Status.SUCCESS: 0>, 'frame_length': 16, 'payload_length': 9, 'parameter_id': <NetworkParameter.trust_center_address: 14>, 'parameter': b'x<\t\xff\xff.!\x00'} (seq 64)
2024-03-17 20:46:59.858 a0d7b954-ssh zigpy_deconz.api DEBUG Read parameter trust_center_address(None)=00:21:2e:ff:ff:09:3c:78
2024-03-17 20:46:59.858 a0d7b954-ssh zigpy_deconz.api DEBUG Sending CommandId.aps_data_request{'request_id': 24, 'flags': <DeconzSendDataFlags.NONE: 0>, 'dst': DeconzAddressEndpoint(address_mode=<AddressMode.NWK: 2>, address=0xFFFD, endpoint=0), 'profile_id': 0, 'cluster_id': <ZDOCmd.IEEE_addr_req: 0x0001>, 'src_ep': 0, 'asdu': b'\x17n\xdd\x00\x00', 'tx_options': <DeconzTransmitOptions.USE_NWK_KEY_SECURITY: 2>, 'radius': 0, 'relays': None} (seq=65)
2024-03-17 20:46:59.858 a0d7b954-ssh zigpy_deconz.uart DEBUG Send: 1241001b001400180002fdff0000000100000500176edd00000200
2024-03-17 20:46:59.873 a0d7b954-ssh zigpy_deconz.uart DEBUG Frame received: 0x124100090002002218
2024-03-17 20:46:59.873 a0d7b954-ssh zigpy_deconz.api DEBUG Received command CommandId.aps_data_request{'status': <Status.SUCCESS: 0>, 'frame_length': 9, 'payload_length': 2, 'device_state': DeviceState(network_state=<NetworkState2.CONNECTED: 2>, device_state=<DeviceStateFlags.APSDE_DATA_REQUEST_FREE_SLOTS_AVAILABLE: 8>), 'request_id': 24} (seq 65)
2024-03-17 20:46:59.874 a0d7b954-ssh zigpy_deconz.api DEBUG Sending CommandId.read_parameter{'parameter_id': <NetworkParameter.link_key: 25>, 'parameter': b'x<\t\xff\xff.!\x00'} (seq=66)
2024-03-17 20:46:59.874 a0d7b954-ssh zigpy_deconz.uart DEBUG Send: 0a42001000090019783c09ffff2e2100
2024-03-17 20:46:59.889 a0d7b954-ssh zigpy_deconz.uart DEBUG Frame received: 0x0a42002000190019783c09ffff2e21005a6967426565416c6c69616e63653039
2024-03-17 20:46:59.889 a0d7b954-ssh zigpy_deconz.api DEBUG Received command CommandId.read_parameter{'status': <Status.SUCCESS: 0>, 'frame_length': 32, 'payload_length': 25, 'parameter_id': <NetworkParameter.link_key: 25>, 'parameter': b'x<\t\xff\xff.!\x00ZigBeeAlliance09'} (seq 66)
2024-03-17 20:46:59.890 a0d7b954-ssh zigpy_deconz.uart DEBUG Frame received: 0x0e430007002a00
2024-03-17 20:46:59.890 a0d7b954-ssh zigpy_deconz.api DEBUG Received command CommandId.device_state_changed{'status': <Status.SUCCESS: 0>, 'frame_length': 7, 'device_state': DeviceState(network_state=<NetworkState2.CONNECTED: 2>, device_state=<DeviceStateFlags.APSDE_DATA_INDICATION|APSDE_DATA_REQUEST_FREE_SLOTS_AVAILABLE: 10>), 'reserved': 0} (seq 67)
2024-03-17 20:46:59.890 a0d7b954-ssh zigpy_deconz.api DEBUG Read parameter link_key(00:21:2e:ff:ff:09:3c:78)=LinkKey(ieee=00:21:2e:ff:ff:09:3c:78, key=5a:69:67:42:65:65:41:6c:6c:69:61:6e:63:65:30:39)
2024-03-17 20:46:59.891 a0d7b954-ssh zigpy_deconz.api DEBUG Sending CommandId.aps_data_request{'request_id': 26, 'flags': <DeconzSendDataFlags.NONE: 0>, 'dst': DeconzAddressEndpoint(address_mode=<AddressMode.NWK: 2>, address=0xFFFD, endpoint=0), 'profile_id': 0, 'cluster_id': <ZDOCmd.IEEE_addr_req: 0x0001>, 'src_ep': 0, 'asdu': b'\x19n\xdd\x00\x00', 'tx_options': <DeconzTransmitOptions.USE_NWK_KEY_SECURITY: 2>, 'radius': 0, 'relays': None} (seq=67)
2024-03-17 20:46:59.891 a0d7b954-ssh zigpy_deconz.uart DEBUG Send: 1243001b0014001a0002fdff0000000100000500196edd00000200
2024-03-17 20:46:59.905 a0d7b954-ssh zigpy_deconz.uart DEBUG Frame received: 0x124300090002002a1a
2024-03-17 20:46:59.905 a0d7b954-ssh zigpy_deconz.api DEBUG Received command CommandId.aps_data_request{'status': <Status.SUCCESS: 0>, 'frame_length': 9, 'payload_length': 2, 'device_state': DeviceState(network_state=<NetworkState2.CONNECTED: 2>, device_state=<DeviceStateFlags.APSDE_DATA_INDICATION|APSDE_DATA_REQUEST_FREE_SLOTS_AVAILABLE: 10>), 'request_id': 26} (seq 67)
2024-03-17 20:46:59.906 a0d7b954-ssh zigpy_deconz.api DEBUG Sending CommandId.read_parameter{'parameter_id': <NetworkParameter.security_mode: 16>, 'parameter': b''} (seq=68)
2024-03-17 20:46:59.906 a0d7b954-ssh zigpy_deconz.uart DEBUG Send: 0a44000800010010
2024-03-17 20:46:59.921 a0d7b954-ssh zigpy_deconz.uart DEBUG Frame received: 0x0a4400090002001003
2024-03-17 20:46:59.921 a0d7b954-ssh zigpy_deconz.api DEBUG Received command CommandId.read_parameter{'status': <Status.SUCCESS: 0>, 'frame_length': 9, 'payload_length': 2, 'parameter_id': <NetworkParameter.security_mode: 16>, 'parameter': b'\x03'} (seq 68)
2024-03-17 20:46:59.922 a0d7b954-ssh zigpy_deconz.api DEBUG Read parameter security_mode(None)=3
2024-03-17 20:46:59.922 a0d7b954-ssh zigpy.backups DEBUG Adding a new backup NetworkBackup(version=1, backup_time=datetime.datetime(2024, 3, 17, 19, 46, 59, 922187, tzinfo=datetime.timezone.utc), network_info=NetworkInfo(extended_pan_id=dd:dd:dd:dd:dd:dd:dd:dd, pan_id=0x1A62, nwk_update_id=0, nwk_manager_id=0x0000, channel=11, channel_mask=<Channels.CHANNEL_11: 2048>, security_level=5, network_key=Key(key=01:03:05:07:09:0b:0d:0f:00:02:04:06:08:0a:0c:0d, tx_counter=12174059, rx_counter=0, seq=0, partner_ieee=ff:ff:ff:ff:ff:ff:ff:ff), tc_link_key=Key(key=5a:69:67:42:65:65:41:6c:6c:69:61:6e:63:65:30:39, tx_counter=0, rx_counter=0, seq=0, partner_ieee=00:21:2e:ff:ff:09:3c:78), key_table=[], children=[], nwk_addresses={}, stack_specific={}, metadata={'deconz': {'version': '0x26500900'}}, source='zigpy-deconz@0.23.1'), node_info=NodeInfo(nwk=0x0000, ieee=00:21:2e:ff:ff:09:3c:78, logical_type=<LogicalType.Coordinator: 0>, model='Conbee III', manufacturer='dresden elektronik', version='0x26500900'))
2024-03-17 20:46:59.922 a0d7b954-ssh zigpy_deconz.api DEBUG Sending CommandId.aps_data_indication{'flags': <DataIndicationFlags.Always_Use_NWK_Source_Addr: 1>} (seq=69)
2024-03-17 20:46:59.922 a0d7b954-ssh zigpy_deconz.uart DEBUG Send: 1745000800010001
2024-03-17 20:46:59.924 a0d7b954-ssh zigpy_deconz.api DEBUG Serial '/dev/ttyUSB1' connection lost unexpectedly: None
These tracebacks aren't really a problem, you can safely ignore them
Hello,
is anyone still looking into this? I posted as a reply in another issue, but wanted to try this here one more time.