Open ZYWNB666 opened 1 week ago
when progress is 70%, it is in the stage of building index.
当进度达到70%时,进入建设指标阶段。
What will be done at this stage? I don't understand, because my data has already been transferred, what else will be done.
This stage has been going on for five hours, and I have to suspect a bug
because your command is ./milvus-backup restore --restore_index -n backup_test -s _recover
so only when index building is finished , this task will be considered as success.
Can you provide some logs of Milvus? We need to check why the building index costs so much time.
This is backup's log backup (2).log
This is backup's log backup (2).log
Milvus log is also needed
This is backup's log backup (2).log
Milvus log is also needed
Probably because there is too much data and the index is too complicated
However, I ran into another problem, the recovered data was twice the data before the backup
This is backup's log backup (2).log
Milvus log is also needed
Probably because there is too much data and the index is too complicated
However, I ran into another problem, the recovered data was twice the data before the backup
Is it because the Celebrity was already loaded into memory when I backed it up that there were two copies?
Current Behavior
./milvus-backup create -n backup_test The ip addresses entered in the backup configuration file are the milvus and minio addresses of the official environment I then copied the backup files to the test environment
Finally, change all the connection addresses in the configuration file to the ip address of the test environment ./milvus-backup restore --restore_index -n backup_test -s _recover
Perform the restore operation, and the data seems to be restored, but the tool remains in this state Although the data has been restored, I am not sure whether I did the right thing because of this state My configuration file is as follows
Expected Behavior
It should have been successful, but it didn't return any value
Steps To Reproduce
Environment
Anything else?
No response