search

zingmars / gst-pylonsrc

A gstreamer plugin for image capture from Basler's USB3 cameras. Please read the README before using.
Other
14 stars 7 forks source link

Cannot find proper location on Jeston baord #14

Closed jahwanoh closed 4 years ago

jahwanoh commented 4 years ago

I'm using Jetson board and cannot find gstreamer-1.0/ folder... do you have any experience related with this?

To install manually you need copy, move or symlink the following files

./plugins/libgstpylonsrc.la ./plugins/.libs/libgstpylonsrc.so to either of these locations:

~/.local/share/gstreamer-1.0/plugins/ if you only want your user to be able to use this plugin /usr/local/lib/gstreamer-1.0/ if you want this plugin to be available to every user. Note that these are the default locations which might be different if you installed gstreamer with a custom location prefix.

zingmars commented 4 years ago

Which Linux distribution are you running?

The first directory (~/.local/share/gstreamer-1.0/plugins/) must be created manually most of the time. The latter might not exist if you only have the distribution's version of gstreamer. For that the location of plugins depends on where gstreamer is installed, I think (/usr/lib/gstreamer-1.0?).

jahwanoh commented 4 years ago

I managed to find one below. I will try to follow the last instructions.

  1. ubuntu 14.08 for host pc /usr/lib/x86_64-linux-gnu/gstreamer-1.0

  2. and Jetson Xavier. /usr/lib/aarch64-linux-gnu/gstreamer-1.0

jahwanoh commented 4 years ago

hm, actually I tried it again. I use sudo make install in the gst-pylonsrc/plugins directory. I think it was installed correctly.

:/usr/local/lib/gstreamer-1.0$ ls -al
total 1128
drwxr-xr-x 2 root root   4096 Oct 10 20:33 .
drwxr-xr-x 6 root root  12288 Oct 10 14:23 ..
-rw-r--r-- 1 root root  74972 Oct 10 20:33 libgstfpsfilter.a
-rwxr-xr-x 1 root root   1105 Oct 10 20:33 libgstfpsfilter.la
-rwxr-xr-x 1 root root  53504 Oct 10 20:33 libgstfpsfilter.so
-rw-r--r-- 1 root root 654966 Oct 10 20:33 libgstpylonsrc.a
-rwxr-xr-x 1 root root   1098 Oct 10 20:33 libgstpylonsrc.la
-rwxr-xr-x 1 root root 338800 Oct 10 20:33 libgstpylonsrc.so
zingmars commented 4 years ago

You can test it with gst-inspect-1.0 pylonsrc.

jahwanoh commented 4 years ago

gst-launch-1.0 -v pylonsrc camera=1 fps=25 ! bayer2rgb ! nvvidconv ! 'video/x-raw(memory:NVMM), format=NV12' ! omxh265enc ! matroskamux ! filesink location=test_1_265.mp4 -e

it worked fine with above. Thank you.

zingmars commented 4 years ago

Depending on your camera you might be able to use the imageformat parameter for pylonsrc to output rgb directly. See supported formats.