Open Darkyenus opened 2 years ago
The 2021 year model G14 is not validated to be used with G14Manager (I don't have one to test it out).
Is there anything I can do to help with extending support for it? If you don't have time to do it, could you please give me some pointers to where should I start my investigation?
I have the same issue.
2021 Model with exact same problem. I am here to help too if I can provide something.
Let me get back to you all next week sometime. Been very busy lately.
However, this is the function returning the error: https://github.com/zllovesuki/G14Manager/blob/main/controller/cmd.go#L40
You could recompile a build that prints the error message. It was an oversight on my part (forgetting to do that)
The 2021 year model G14 is not validated to be used with G14Manager (I don't have one to test it out).
I can ask you some questions about how to change the background to white on Armory Crate?Can you help me?
The 2021 year model G14 is not validated to be used with G14Manager (I don't have one to test it out).
I can ask you some questions about how to change the background to white on Armory Crate?Can you help me?
There's a proof of concept under poc/matrix. You can give it a try
I also ran into this issue. I took a look, and it seems that the code is looking for a HID device with vendor ID = 0x0b05
and product ID = 0x1866
, which is not found on my system (GA401Q). However, \Device\ATKACPI
is present in WinObj.
asusctl
(the equivalent of this project for Linux) supposedly supports this laptop, and has a slightly different product ID matching:
ENV{ID_MODEL_ID}=="1[89][a-zA-Z0-9][a-zA-Z0-9]|193b"
On my machine (GA401Q), I seem to have 2 products:
If I change the product ID to 0x193b
, the hid_enumerate
function seems to hit the code path that recognizes the device and does things with it, but I haven't had time to investigate further. It doesn't seem to work yet, but it's a step in the right direction.
Edit: the correct product ID might be 19b6
; searching for that product ID yields several device paths, but none that match exactly kbControlDevice = "mi_02&col01"
.
I also ran into this issue. I took a look, and it seems that the code is looking for a HID device with
vendor ID = 0x0b05
andproduct ID = 0x1866
, which is not found on my system (GA401Q). However,\Device\ATKACPI
is present in WinObj.
asusctl
(the equivalent of this project for Linux) supposedly supports this laptop, and has a slightly different product ID matching:ENV{ID_MODEL_ID}=="1[89][a-zA-Z0-9][a-zA-Z0-9]|193b"
On my machine (GA401Q), I seem to have 2 products:
* 193b * 19b6
If I change the product ID to
0x193b
, thehid_enumerate
function seems to hit the code path that recognizes the device and does things with it, but I haven't had time to investigate further. It doesn't seem to work yet, but it's a step in the right direction.Edit: the correct product ID might be
19b6
; searching for that product ID yields several device paths, but none that match exactlykbControlDevice = "mi_02&col01"
.
You might be able to improve the matching logic with regex. Implemented hard-coded comparison because at the time I only had the 2020y model
@zllovesuki I fixed the matching logic, but it still fails. The initBufs
bytes have been updated and are now incorrect (e.g. 5A 89
is changed to 5D B9
etc), but even after fixing these and after receiving the following message:
device: \\?\hid#vid_0b05&pid_19b6&mi_00&col03#8&3a080f36&0&0002#{4d1e55b2-f16f-11cf-88cb-001111000030} (721297) write input buffer [0:8]: [93 185 0 0 0 0 0 0]
device: write output buffer [0:8]: [0 0 0 0 0 0 0 0]
device: \\?\hid#vid_0b05&pid_19b6&mi_00&col03#8&3a080f36&0&0002#{4d1e55b2-f16f-11cf-88cb-001111000030} (721297) write input buffer [0:8]: [93 65 83 85 83 32 84 101]
device: write output buffer [0:8]: [0 0 0 0 0 0 0 0]
device: \\?\hid#vid_0b05&pid_19b6&mi_00&col03#8&3a080f36&0&0002#{4d1e55b2-f16f-11cf-88cb-001111000030} (721297) write input buffer [0:8]: [93 5 32 49 0 8 0 0]
device: write output buffer [0:8]: [0 0 0 0 0 0 0 0]
keyboard control plugin initialized successfully.
...it still fails when applying the configuration with:
[controller] Recoverable error in controller loop: [controller] error applying configurations: Incorrect function.
[supervisor] event: controllerSupervisor: Failed service 'Controller' (4.905327 failures of 5.000000), restarting: true
I'm still looking into it - if I manage to fix it, I'll send you a PR.
@ffgrep appreciate it 🙏 I don't have an G14 to test anymore and work is busy 🥲
Running latest release v0.4.3 on ROG Zephyrus G14 GA401QM_GA401QM (2021 model with Anime Matrix) immediately fails with following output and exit code 1:
All relevant Asus system services are disabled and stopped.
Device manager shows "Armoury Crate Control Interface" and "ASUS System Control Interface v3" both installed (Readme mentions v2, not v3, maybe that is the problem?).
atkwmiacpi64.sys
is shown with version 2.1.29.0.