Closed riban-bw closed 1 month ago
There is the ability to position a chain at any position in the mixer view. This cannot be done with touch alone.
Able to click and drag the chain to new position.
Cannot move chain with touch.
An encoder is used to move the chain but should also be draggable.
Raspberry Pi 4 Model B Rev 1.4 Audio: ZynADAC Display: ZynScreen 3.5 (v1) Wiring: MCP23017_ZynScreen I2C: MCP23017@0x20, MCP23017@0x21, ADS1115@0x48
Debian GNU/Linux 12 (bookworm) Build Date: 2024-03-01 Memory: 57% (1060M/1846M) SD Card: 26% (14G/57G) Temperature: 53.0ºC Overclock: Medium
Tuning: 440 Hz Master Channel: Off Preload Presets: On ZS3 (SubSnapShots): On Power Save: 60 minutes Audio Levels on Snapshots: On
zyncoder: oram (62626a8) zynthian-ui: oram (66ceddc) zynthian-sys: oram (5affa51) zynthian-data: oram (e222e11) zynthian-webconf: oram (0327ac4)
Describe the issue
There is the ability to position a chain at any position in the mixer view. This cannot be done with touch alone.
To Reproduce
Steps to reproduce the behavior:
Expected behaviour
Able to click and drag the chain to new position.
Actual behaviour
Cannot move chain with touch.
Additional context
An encoder is used to move the chain but should also be draggable.
Configuration
Hardware
System
MIDI & UI
Software