After a while of using the APC with it's driver on Zynthian, I got to see Pads Highlit in Device mode that normally should only be visible in Mixpad mode. Also saving a snapshot seems to be faulty: the grid of the sequencer isn't 4x4 anymore but 8x8.
In Device mode there should not be any Pads visible on the left half of the APC's Pads.
Actual behaviour
Pads from dthe Mixpad mode are visible in device mode after entering a Pattern.
Also I saw that the Softkeys on the right of the Pads corresponding to the knobs (emulating encoder press) are turning dark/off but still remain functioning after entering a Pattern.
Screenshots
Additional context
SNAPSHOT(*.zss)-Files aren't supported here, but I uploaded one in the post...
Configuration
Hardware
Raspberry Pi 4 Model B Rev 1.5
Audio: HifiBerry DAC+ ADC PRO
Display: ZynScreen 3.5 (v1)
Wiring: MCP23017_ZynScreen
I2C: MCP23017@0x20
Profile: v4_stage
Describe the issue
After a while of using the APC with it's driver on Zynthian, I got to see Pads Highlit in Device mode that normally should only be visible in Mixpad mode. Also saving a snapshot seems to be faulty: the grid of the sequencer isn't 4x4 anymore but 8x8.
To Reproduce
Steps to reproduce the behavior:
https://discourse.zynthian.org/t/akai-apc-key25-mk2-driver/9082/85?u=jojo_action
Expected behaviour
In Device mode there should not be any Pads visible on the left half of the APC's Pads.
Actual behaviour
Screenshots
Additional context
SNAPSHOT(*.zss)-Files aren't supported here, but I uploaded one in the post...
Configuration
Hardware
System
MIDI & UI
Software