This repository contains the development and distribution code for the Global Brain Consortium website.
This section will detail how to add content to the website. For more detailed information, please read the Content Management section of this README.
The quickest way to add content is to be added as a contributor to the repo. You can email derek.lo@mcin.ca to request this.
The next step is to clone or fork the repository so that you can make changes locally. To do this, please read the documentation on cloning or forking.
If you would like to preview your changes locally, please follow these steps on "running locally".
After cloning or forking the repository, go to your local drive and change the directory to the repository. Follow these steps to add a News or Event item:
1) From the root directory, go to the src/resources folder
2) Duplicate an existing .njk file and rename it using the following naming convention: (yyyy)(mm)(dd)-name.njk
3) Place an image for the item in the following folder: src/assets/images/content/news
4) Edit the content of the new .njk by changing the following fields:
'item title'yyyy-mm-ddresource or external or youtube or pdf or register
"/assets/images/content/news/(filename)""(link to the resource. this is optional)"A brief description of the item in plain text with no special characters like colons or asteriks
5) Save your file
6) Create a pull request to main branchYou can see an example of how the cards look by going to the News & Events page.
Similar to above, adding a card for the Newsletters requires a few different steps:
1) Duplicate an existing .njk file in the 'resources' folder.
2) Change the name of the .njk file using the following naming convention: (yyyy)(mm)(dd)-name.njk
3) Put the PDF in the folder "src/assets/images/content/newsletters/"
4) Edit the content of the .njk file as above with the following differences:
resource"/assets/images/content/newsletters/(filename).pdf"
5) Save your file
6) Create a pull request to main branchThe network page contains all the members of the Global Brain Consortium. To add a member, please follow these steps:
1) Place an image of the member in the following folder: src/assets/images/people. The aspect ratio of the image should be square
2) From the root directory, go to the src/raw-data folder
3) Open people.tsv with your favorite editor (.tsv stands for Tab-Separated Values)
4) In the field labelled slug type in the value (first name)-(last name)
5) In the field labelled name type in the members name
6) In the field labelled image type in the url as follows /assets/images/people/(filename)
7) In the field labelled affiliation type in the members affiliation, preferrably a short version
8) In the field labelled steeringGroupMember type in FALSE unless the member is part of the Steering Committee, in which case enter TRUE
9) In the field labelled expertiseTags copy the fields from another entry and paste it here. The tag filter is not currently active on this page.
10) In the field labelled website enter the url for the members website (optional)
11) Save the people.tsv file
12) Create a pull request to main branch
Most maintenance of this site will involve adding small pieces of content with standard format (such as new resource listings or new network members). This is achieved using a standard process of making commits to the remote git repository. If you are not familiar with git and GitHub, this introduction may be useful.
If there is only one developer maintaining the site at any given time, adding small amounts of new content to the site typically consists of three steps: adding the content to your local copy of the site (see "Running Locally" below); committing the changes locally to the main branch; and pushing those changes to the remote repository.
If multiple developers are simultaneously adding content, or if substantial amounts of new content or changes to the site structure are required, any changes should be committed to a local development branch separate from main. A pull request should then be opened and reviewed by site developers before these changes are merged into the main branch.
Data for a new member can be added to the network section of the website by editing the src/raw_data/people.tsv file. This file is a standard tab-separated value file which can be opened and edited in any spreadsheet software. To add a new person to the file:
0) Always start by ensuring that you have the most recent version of the website code by running git pull. This will overwrite any changes to local files, so make sure you run this command before adding any new content (and don't run it again until you have committed any changes!)
1) Open the file in your preferred spreadsheet software
2) Insert the data for the new person on a new row under each corresponding header, and save the file.
src/_data/people.json, which will show up as a change in your local git repository.
4) Check that the newly added person is visible on the network page of the locally-running site.
5) If the person has been added successfully, commit your changes to the people.tsv and people.json files to your local master branch.
6) Push your local main branch to the remote.These instructions assume a single developer is maintaining the site. If multiple developers are maintaining the site, use the pull request process outlined previously.
Data for a new partner can be added by editing the src/raw_data/partners.tsv file. See "Adding new people" above.
News & Events are links to information distributed by the collaboration. These are stored as .njk files in the src/resources/ directory. To add a new resource, copy one of the existing files and give it a new name appropriate for the resource content being added. You can then open the file to change its content, committing the changes as described above:
titleA short title for the resource, which will be displayed on the resources page.
dateA date for the resource (e.g. publication date) in yyyy-mm-dd format
typeThere are four types of posts:
Read MoreGo To LinkView on YouTubeOpen PDFRegister to AttendimageAn optional filepath pointing to an image file to be displayed with the resource. This can be replaced with "" (empty opening and closing quotes) if no image is needed. Otherwise it should be a filepath starting with /assets/images/content/(folder name). Ensure that you copy the image into this directory so that it will be added to the website.
resource_link:An optional URL enclosed in quotation marks, linking to the resource at another location on the web.
e.g.:
resource_link:"https://osf.io/6khrv/"
excerptA short description of the resource which will be displayed as text on the resources page. This must be written on a single line.
A list of expertise tags that members can choose from is stored in src/_data/expertiseTags.json. They are stored in the "tags" property as string entries in a list. To add a new expertise tag, just add a new string to the list. As mentioned above, this feature is not currently in use. Please just copy the expertise from a previous entry.
In the current version of the website, most other content is hard-coded into the HTML or .njk template files. You can edit this content by editing these files in the src directory. Note that all content in the dist directory is automatically generated and changes will be overwritten when the site is built.
To run a local version of the website for development purposes:
1) Install the prerequisite dependencies:
cd into the root directory of the cloned repo
4) Run npm install to install the dependencies required to build the website
5) Run npm start to serve the website locally (by default, it will be served on localhost:8080)The public version of the website will be built and deployed automatically when a commit is made to the main branch of this repository. To run the build script locally, follow the instructions in "Running Locally", replacing the final step with the command npm build.