-
Hi @mstegen
I was able to compile the code available in your repo but not sure if it is working or not because I was not able to identify any output signal after flashing the code (tried on both R…
-
hey @AlexanderBabel @kiwi-cam i have a brand new rm4 pro and am trying to learn an ortal fireplace with an rf 315mhz remote. both through the native broadlink app and homebridge->homekit, when i do fr…
-
Sir i ordered a cc1101 to try to transmit 315mhz car key fob signal,i used the rtl_43 library to capture the 315mhz signal now i want to transmit with this library i will be more than happy if someone…
-
Can you add the function of manually setting frequency? Some places need 315Mhz, or other frequencies.
thank you
-
When I do a full calibration at 315MHz center with a 30MHz span using 401 points the S21 measurements is corrupted and looks to be showing noise.
Steps to reproduce:
1. Configure Trace 0 as S11 …
-
I've got rtl_433 more or less working inside kismet, but I notice some strangeness in the web ui. I have the following in my kismet_site.conf
source=rtl433-315:channel=315MHz,gain=60,name=TPM315
…
-
Whenever I try to use anything (except for AM) on a frequency such as 433MHz, it'll run for about 5 seconds then stop with no rhyme or reason. It just doesn't work at all on 27MHz, and flat-out crashe…
-
I tried this setup with an Arduino mega 2560 & ASK STX882. Code is exactly the same.
Then I checked the signals on data pin of STX882 on the oscilloscope but the signals were not as expected I suppos…
-
I’ve tried to jam 3 devices in my house with no success, one being on 315mhz and another on 302.18mhz. Is there a specific configuration I should be using or is the Jammer just broken? Thank you!
-
Hi,
At first, thank You for great project!
I am trying to use infrared and rf (315MHz) remote controllers with my homemade relay controller. Thanks to your library I can flip relays from HA as w…