SpaceTeddy CC1101 issues

SpaceTeddy / CC1101

driver library for Ti CC1100 / CC1101. For Arduino and Raspberry Pi

MIT License

271 stars 92 forks source link

issues

Newest

Newest Most commented Recently updated Oldest Least commented Least recently updated

RX_Demo using 315Mhz ASK/OOK door bell as a test

#57 jpitz31 opened 2 months ago
0
No output after 'Init CC1100...' (Arduino)

#56 DrahcPro closed 9 months ago
5
Sending data from RPI to Arduino

#55 Somusundram opened 1 year ago
1
Issue with interfacing

#54 beginnerslvl opened 2 years ago
1
Create LICENSE

#53 SpaceTeddy closed 2 years ago
0
Problems with Raspbian Bullseye

#52 ulde1 opened 2 years ago
4
Receive raw data for replay

#51 Ruegg opened 2 years ago
1
Use function

#50 mso1196 opened 3 years ago
0
Arduino. TX. Hang in receive() -> sidle() after initialization.

#49 Alex-K-O-R opened 3 years ago
0
VUpdate cc1100_arduino.h

#48 vinaybabu4010 closed 2 years ago
0
Usability for USB (UART silabs cp210x) connected CC1101

#47 WollyWonka opened 3 years ago
2
Should the first byte of tx buffer be length byte ?

#46 uludag2806 opened 3 years ago
0
CC1101 detected, but demo transmit fails

#45 JYouren opened 4 years ago
3
Please Add a License

#44 johnmrushing opened 4 years ago
1
Message blocking

#43 tisaud opened 4 years ago
0
send txbuffer

#42 bastlmax opened 4 years ago
0
Some question for porting to ESPxx

#41 tardyp opened 4 years ago
1
TX-only without addressing

#40 ugurturkel closed 4 years ago
1
Noob problems

#39 maxence-de-saint-seine closed 4 years ago
6
Tx is working, however Rx does not register any received signal. Antennas confirmed working.

#38 skloppe2 opened 5 years ago
0
Using CC1101 to Sniff 433Mhz for RF controls and sensors on Raspberry

#37 YindSoft opened 5 years ago
0
Will the TX_Demo and RX_Demo work on one raspberry pi at the same time?

#36 ole1986 closed 5 years ago
2
Can I use this libary to sniff 868Mhz protocol with CC1101

#35 guitar9 opened 5 years ago
2
Stuck in Tx - MARCSTATE 0x13

#34 jaydip-kathiriya opened 5 years ago
3
How were original register settings determined?

#33 esdad697 closed 5 years ago
10
MSP430 MCU support is added by me

#32 abhra0897 opened 5 years ago
2
Unable to compare/process received data

#31 Siem-H opened 5 years ago
8
Deviation, Sync word and Preamble

#30 JeanPoll opened 5 years ago
0
Arduino Due compatibility

#29 ValentinArnould opened 5 years ago
1
345 MHz Support

#28 esdad697 opened 5 years ago
0
Arduino not receiving anything...

#27 okeeeeeeeeeeeeeeeeeeeeeeeeee opened 5 years ago
2
Update README.md

#26 iMarkus closed 5 years ago
0
Cleanup

#25 basman closed 5 years ago
0
Cleanup typos and tiny improvements

#24 basman closed 5 years ago
0
CC1101 raspberry and arduino

#23 ahmedgh1995 opened 5 years ago
12
Move example sketch to appropriately named folder

#22 per1234 closed 5 years ago
0
Receiving OOK packet on 433,950 MHz

#21 dudator closed 5 years ago
2
Multiple CC1101

#20 forceshutdown opened 6 years ago
1
setting channel spacing?

#19 dsvensson opened 6 years ago
0
Infinite loop after enabling RX (Raspberry Pi)

#18 mireckazimir closed 5 years ago
4
Suggested improvements to your example

#17 Phil-666 closed 5 years ago
3
Trying to receive signal from CCdebugger and smartRF studio

#16 Bob1237 closed 5 years ago
4
Arduino not reveicing anything

#15 kyonmiriam closed 6 years ago
8
SPI1 not supported?

#14 salmg closed 6 years ago
5
The example does not work following everything proposed in the readme from arduino to raspberry pi 3

#13 ElPernotador closed 6 years ago
6
uint8_t CC1100::packet_available() failing with unexpected MARCSTATE

#12 mrcodetastic closed 3 years ago
7
Not Receiving Anything

#11 esdad697 closed 5 years ago
24
Nothing received

#10 martenumberto closed 7 years ago
2
Missing file (or maybe renamed) ?

#9 kenji21 closed 7 years ago
6
Raspberry TX Hangs

#8 esdad697 closed 7 years ago
3