search

SpaceTeddy / CC1101

driver library for Ti CC1100 / CC1101. For Arduino and Raspberry Pi
MIT License
271 stars 92 forks source link

Noob problems #39

Closed maxence-de-saint-seine closed 4 years ago

maxence-de-saint-seine commented 5 years ago

Hello, I did clone the project to my rpi and read your readme file. But now, I'm just blocked. I understood your code could help me for my project in node red. But i just don't know how to start the code know that I have the file on my pi.

Thanks for those who could help me or link me a tutorial, I searched for hours and didn't find anything.

SpaceTeddy commented 5 years ago

Did you read it from here? https://github.com/SpaceTeddy/CC1101/blob/master/README.md#raspberry-pi

maxence-de-saint-seine commented 5 years ago

Thank you for this quick answer. I did follow many tutorial and always got blocked by different issue. When i compile and start with those step, I just get

CC1100 SW: Verbose option is set `' Raspberry CC1101 SPI Library test Init CC1100... no CC11xx found!

is that an hardware problem? wiring?

testbughub commented 4 years ago

Fellow noob here, having the exact same issue. Hoping for any kind of help!

SpaceTeddy commented 4 years ago

OK, which Hardware do you use? rPi or arduino? please be so kind and take a picture of your full test setup. Probably we can find the issue.

testbughub commented 4 years ago

Never mind, I thought I had double checked the wiring, but after a tripple check I noticed one cable was on the wrong pin. But I'm gonna buy a new module, cause I believe this one may be busted. I'm not getting anything on the RX. Thanks anyway, and for the quick reply!

SpaceTeddy commented 4 years ago

👍