-
I am currently trying to implement Openwifi on an ADRV9361-Z7035-BOB board and I would like to know where exactly we should copy the BOOT.bin and devicetree.tdb files? One more thing, when we want to …
-
Hello , I have been working through the code , building source , on Laptop (x86) , Raspberry Pi 3 and 4 , and a cross compiled using Yocto for ADRV9361 Zynq board, also managed to build for FPGA but I…
-
I am getting seg faults when I compile FFTW for a Zynq 1 processor part (ADRV9361-Z7035 SoM) using GCC 9.2 (https://developer.arm.com/-/media/Files/downloads/gnu-a/9.2-2019.12/binrel/gcc-arm-9.2-2019.…
-
Hi @noelpedro
I noticed you worked on this project for a while (have seen your questions in the GNSS-SDR repo). Unfortunately, the GNSS-SDR authors did not share the RTL implementation of the HW ac…
-
Hi, I'm a researcher in FPGA design, but a beginner in Linux kernel. Currently, I'm looking for a suitable method for wireless mesh communication (MANET) for our project. I have designed PHY layer bas…
-
Openwifi is very strong thanks. Now, I want to realize a mesh network with Openwifi firmware. I tried to implement batman-adv on our platform (ADRV9361-7035), when I tried ton install batman-adv I hav…
-
0. Could you send email to xianjun.jiao@ugent.be to introduce your self?
1. Our image is used directly or you build your own image? directly
2. What is your own modification? Nothing
3. Ver…
-
0. Could you send email to xianjun.jiao@ugent.be to introduce your self?
Done
**Issue description:**
Although, AP mode works great.
I observe a lot of bad-fcs messages in tcpdump when openwifi…
-
in
```
root@analog:~# cat /etc/rpi-issue
Raspberry Pi reference 2019-08-02
Generated using pi-gen, https://github.com/RPi-Distro/pi-gen, 29d362e5443c4f591885a4de3cbd48d4239efb70, stage6
root@a…
rgetz updated
3 years ago
-
I checked iio-oscilloscope/plugins/spectrum_analyzer.c plugin by injecting RF signal on RX1 of the ADRV9361-z7035 . I want to see this peak on AD9361 DAC by enabling RF LOOP BACK by setting ADC path r…