open-sdr openwifi issues

open-sdr / openwifi

open-source IEEE 802.11 WiFi baseband FPGA (chip) design: driver, software

GNU Affero General Public License v3.0

3.67k stars 626 forks source link

issues

Newest

Newest Most commented Recently updated Oldest Least commented Least recently updated

MCS problem

#416 jyskr opened 1 day ago
2
How to output a fixed RF frequency with openwifi

#415 mxoxwh closed 2 days ago
0
[Feature request] Support of SoapySDR as a neutral and platform independent SDR support library

#414 ohault closed 6 days ago
8
is:issue is:open May I ask how to change the RF power of OpenWiFi? The current board used is Antsdr, and I want to increase the RF power to improve communication quality and distance

#413 61515 closed 1 week ago
0
Error reporting about CSI radar

#412 csy990406 closed 1 week ago
5
How to extracting CSI results from two RX antennas for the phase difference

#411 Remaker-JDY opened 2 weeks ago
2
Cannot find the E310v2 kernel in BOOT/openwifi/ after burning the SD card

#410 AnVuNam closed 2 weeks ago
5
How to use packet-iq-self-loopback-test

#409 pan660 opened 4 weeks ago
1
In the IQ capture experiment, running ./monitor_ch.sh will change the master of sdr0, causing the phone connection to disconnect.

#408 chenmo234 closed 1 month ago
0
Instability in CSI Data Obtained by OpenWiFi When Monitoring Mobile Phone WiFi Signals in a Stable Environment

#407 LvHaoyuisme opened 1 month ago
6
rssi correction

#405 wangdan25 opened 1 month ago
2
ADRV9361Z7035 reports wrong amount of available memory

#404 robgar2001 opened 1 month ago
1
Some questions about clock tree

#403 frigo125 opened 2 months ago
0
XC7Z015 support?

#402 sczh01 closed 5 days ago
0
capturing CSI for 2 antenas

#401 DusanKvasnicak closed 2 months ago
4
Modifying the bandwidth can impact the stability of work

#399 huangfu001206 opened 2 months ago
1
adrv9361z7035 can't connect 'openwifi'

#398 zhangsd20 closed 5 days ago
0
extracting CSI results from two RX antennas

#397 wuhhaCos opened 2 months ago
2
CSI Phase keeps changing Despite relatively stable environment

#396 ThETyMaNp closed 1 month ago
7
Problems with the data in the side_info.txt file that records CSI information.

#395 petrichorZSY closed 2 months ago
0
enable 802.11p

#394 nits-skydeploy opened 3 months ago
7
Fixed errors during compilation of OpenWRT kernel modules

#393 robgar2001 closed 4 months ago
0
Why can't openwifi work in lower frequency? such as 1.6/1.5/1.4 G…

#392 winfelin opened 4 months ago
1
Issues Identified in OpenWiFi Scripts for Mesh Functionalit

#391 Maxelectronics closed 5 days ago
0
输出功率

#390 zhuzhineng closed 2 months ago
0
Actual outcome >0.6 ms delay ping time not as shown as short in openwifi introduction.

#389 2018boyan opened 5 months ago
2
sdr0: AP-ENABLED but could not find "openwifi" on phones and computers as 'quick start' on zcu102.

#388 2018boyan closed 5 months ago
0
Support for another RF frontend card

#387 prepito closed 5 days ago
0
RF-Kill when change bandwidth and some problems about CSI show

#386 huangfu001206 closed 5 days ago
0
.

#384 a-nepp closed 6 months ago
0
openwifi_tx_interrupt

#382 winfelin closed 6 months ago
2
Update the uImage

#381 Maxelectronics closed 5 months ago
1
open WiFi丢包率相关问题

#380 joker1-m closed 5 months ago
1
How to get register values in the side_ch module？

#379 Fei8686 opened 6 months ago
1
How to switch 802.11p mode?

#378 Denisfk1985 closed 5 days ago
0
Clarification Request on Your Work in openwifi CSI fuzzer for authorized sensing and covert channels

#377 GaryGogh closed 5 days ago
0
Differences between sub1g and openwifi modulation modes

#376 s-zhen66 closed 5 days ago
0
Many error reports during Demo test

#375 Arash6182 closed 7 months ago
1
Test station mode feature

#374 xiasha closed 5 days ago
0
Change the Rate at the tx (Modulation Mode)

#373 Xiana1 opened 7 months ago
1
Change the Rate at the tx (Modulation Mode)

#372 Xiana1 closed 7 months ago
0
Time slicing operation results are unstable

#371 Aniwer closed 5 days ago
0
How to change the bandwidth?

#370 chshux closed 5 days ago
0
openwifi use FDD mode

#369 wangdan25 closed 7 months ago
7
spi.v

#368 winfelin closed 7 months ago
6
channel interference is inevitable

#367 ericphilbaz closed 7 months ago
0
Cannot boot ZCU102+ FMCOMMS2: [ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000004 ]

#366 gnocil opened 7 months ago
4
openwifi use TDD mode

#365 wangdan25 opened 7 months ago
3
Power Trigger

#364 winfelin closed 7 months ago
0
IQ sample capture - Side info count not incrementing

#363 remydemy opened 7 months ago
2