-
In version 0.12.0, APRS settings are neither read from or written to my DMR-6X2 running firmware version 2.10 (the latest).
Reading the radio with a working APRS configuration produces a QDMR code…
-
I have an AnyTone D878UVII Plus with firmware 2.02N. I'm unable to find any way to add a new TalkGroup via keypad. Only Private Call type contacts can be added. From the CPS you can add both.
soosp updated
2 years ago
-
At least for the DJ-MD5, in order for a channel to get imported as high power, it has to be listed as Turbo in the CSV. High in the CSV is then translated to mid. PNW Digital suggests high power all t…
sdt16 updated
2 years ago
-
I noticed my AnyTone D578UVII uses different a different USB VID and PID than those defined near the top of anytone_interface.cc
Not sure of the best approach should you want to get QDMR working for…
-
Firmware 2.27
The volume knob steps don't allow fine enough adjustment. Even the lowest volume on the "indoor" setting can be too loud in some quieter environments, and there is too large a jump fr…
geary updated
4 months ago
-
Hi All,
After perforing a mostly successful upgrade of the 868 to 878, I have noticed the chan set menu missing on the radio and also, activating the key for digi monitor doesn't work.
All steps…
-
This device actually identifies itself as a D578UV2, V100. So I will call it that way internally.
The device is likely very similar to the D578UV and thus the existing codeplug implementation must …
-
It would be great to open/import an existing codeplug, which was created by the manufacturer CPS. This would help to switch to this software.
-
Issue in CPS Editor when "Quick Call4" is active in "Hot Key", the Import csv function of any
file creates "Run Time error 9: Subscript out of range" and the software crashes
![Quck Call Issue1](htt…
-
This device identifies itself as "D6X2UV2" with hardware revision V100 (1.00).
This device is very likely almost identical to the D878UVII, so "only" the codeplug format needs to be verified:
-…