-
#### Using `arduino-cli` and compiling with c++ compiler flags -O1, -O2 and -O3 appears to silently break the encoder angle reading.
#### Compiling with:
```bash
arduino-cli \
--config-file $PWD…
-
Okay, I got the blink.js sketch to work on ConfigurableFirmata Arduino library version 2.10.1.
What's the story with the accelstepper routines?
Can't seem to find a ConfigurableFirmata Arduino …
-
Conflict with the latest arduino toolset for SAMD21 'synchronized' keyword:
```
c:\Users\Peter\Nextcloud\Projects\Arduino\libraries\grblHAL_MKRZERO\src\driver.c: In function 'driver_init':
c:\Users…
-
I've been working with the TMC2209 and other Trinamic drivers for over 6 years, and have written a guide to help get everyone started as quickly as possible, because these drivers and library are very…
-
I am using ESP32, the same code with 0 modification was working just fine yesterday, since today morning I have been running into this error and idk what to do.
Error message displayed:
```
c:\…
-
First of all, thank you for creating this library and all the documentation in the `README.md`. This was extremely helpful in getting the driver working.
Right now, I am only able to control my ste…
-
I have been using FastAccelStepper for years now. Never ran into this before.
I set up a new ESP32 ( expressif ESP32-WROOM-32E) and I just can't get a signal from the assigned step pin. No matter …
-
I am using TMC2160 to drive a stepper motor with an esp32. When I try to compile the code I get an error:
Arduino: 1.8.19 (Windows Store 1.8.57.0) (Windows 10), Board: "ESP32 Dev Module, Disabled, …
-
all the documentation and examples only point to being able to set the Microsteps if you have hardware serial. Unfortunately my setup does not allow for using another but an arduino nano that doesn't…
-
Per
https://github.com/arduino-libraries/Stepper/blob/4068b9366847a865c9711dc472b815fe64045b5c/src/Stepper.h#L36-L39
and
https://github.com/arduino-libraries/Stepper/blob/4068b9366847a865c…