-
Hello,
I followed the instructions on adding _/etc/udev/rules.d/99-dmr.rules_ and added the recommended values:
> \# TYT MD-UV380
> SUBSYSTEM=="usb", ATTRS{idVendor}=="0483", ATTRS{idProduct}==…
-
The Radio Anytone AT-D878UV Plus gives an error after writing the codeplug onto the radio if the Firmware is higher than 1.18.
Showing on the display of the radio "Codeplug Error. Please Initialize F…
-
Likely a different hardware revision to the AT-D878UV running the same firmware (?). If so not much needs to be done:
- [ ] **Get wireshark capture of codeplug read, write and call-sign DB write to…
-
Can dmrconfig be expanded to write larger Contact databases as obtained at sites such as https://radioid.net/database/dumps#! Or other such sites?
-
Hi. When pushing a codeplug with analog channels and DCS code, the DCS code is'nt pushed on the radio.
If i configure the DCS directly on the radio, qdmr is able to read them. Pushing the same codepl…
-
TOCALL borde vara APAT81, inte APDR10.
http://www.aprs.org/aprs11/tocalls.txt
73
-
1. After a long time of tinkering with hbnet i was able to at least get it running. The problem was that your code requires specific functions that the newer versions of pip modules that are installed…
-
Yes, another New Device issue!
This radio looks similar to the AnyTone 878UV and friends. http://members.optuszoo.com.au/jason.reilly1/868mods.htm#MD5similarities
Right now qdmr detects it as an …
-
-
This device actually identifies itself as a D578UV2, V100. So I will call it that way internally.
The device is likely very similar to the D578UV and thus the existing codeplug implementation must …