-
I'm working on migrating from Urboot v7.7 to v8.0, and I just realized that for MegaCore, there are very few pre-compiled binaries for the ATmega640/1280/2560 for UART2 and UART3.
See here as an ex…
-
* r2 version:
```asm
heads/master-0-gffd8ecd
```
* Build environment:
```asm
Final report:
- PREFIX = /usr
- HAVE_LIB_GMP = 0
- HAVE_OPENSSL = 0
- USE_CAPSTONE = 0
- HAVE_FORK = 1
- …
-
command:
```
make MCU_TARGET=atmega1280 BOOT_ADR=0x1F000 F_CPU=8000000 SD_CS_PORT=PORTH SD_CS_DDR=DDRH SD_CS_BIT=5 USE_LED=0 USE_UART=0 ADDED_CFLAGS="-Wextra -Wno-strict-aliasing" TARGET=$(MCU_TARGET…
-
I have noticed that you don't save RAMPZ and EIND registers during a context switch. RAMPZ can be important when reading data from flash that is located at high addresses (REF: Section 7.6.1 in the AT…
-
### Work environment
| Questions | Answers
|------------------------------------------------------|--------------------
| OS/arch/bits (mandatory) …
-
Hello,
Can you please add support for both atmega168p and atmega168?
Thanks
-
Hi,
By the way, great plugin. The basic arduino boards work great with this plugin.
Platform selected: MegaCore https://github.com/ekapujiw2002/MegaCore
Simple test with arduino ide, blink.ino, …
-
Watchdog not work!
Atmega328p, Nokia 5110. If Watchdog is triggered then the microcontroller restarts and freeze (or enters the reboot cycle?!). It does not depend whether there is a bootloader or no…
-
A lot of registers give their bits names such as
```
#define PORTB0 0
```
That is mildly useful in such as the *absence* of that definition tells me that this bit isn't used or might be reserve…
-
_Original author: M.Cerv...@computer.org (October 01, 2012 21:00:04)_
What steps will reproduce the problem?
Test for new OCR\* in Atm128_AlarmAsyncP.nc/setOcr_A().
It should be always lower than T…