-
Hello
I'm working with 8KB avr devices (4K words flash , currently m8515). I see this error on rjmp/rcall instructions:
Error : Relative address out of range (-2048
-
When creating new Xcode project, I can select "atmega88a" from MCU list, but avrdude complains: `avrdude: AVR Part "atmega88a" not found.` and gives a list with valid parts, where I see the following …
-
`.define m8535def.inc`
There's the file for the ATmega8535 but there's no support fot it at listing devices:
```
$ avra --devices | grep ATmega85
ATmega8515 | 8192 | 0x0060 | 512 |…
-
Build 3 of this and always get the same result.
Maybe i need to modify my gb cart flasher?
…
-
A lot of registers give their bits names such as
```
#define PORTB0 0
```
That is mildly useful in such as the *absence* of that definition tells me that this bit isn't used or might be reserve…
-
```
What steps will reproduce the problem?
1. Install recent Arduino IDE (mentioned in summary)
2. Install arduino-tiny as described in readme.txt of arduino-tiny
3. Create boards.txt from proposed bo…
-
```
What steps will reproduce the problem?
1. Install recent Arduino IDE (mentioned in summary)
2. Install arduino-tiny as described in readme.txt of arduino-tiny
3. Create boards.txt from proposed bo…
-
```
What steps will reproduce the problem?
1. Install recent Arduino IDE (mentioned in summary)
2. Install arduino-tiny as described in readme.txt of arduino-tiny
3. Create boards.txt from proposed bo…
-
```
What steps will reproduce the problem?
1. Install recent Arduino IDE (mentioned in summary)
2. Install arduino-tiny as described in readme.txt of arduino-tiny
3. Create boards.txt from proposed bo…
-
```
What steps will reproduce the problem?
1. Install recent Arduino IDE (mentioned in summary)
2. Install arduino-tiny as described in readme.txt of arduino-tiny
3. Create boards.txt from proposed bo…