-
Bed levelling inaccurate due to filament residue on the nozzle. the preparation is not the same as with the original software, i think it is better solved there so that no filament remains on the nozz…
-
### Did you test the latest `bugfix-2.1.x` code?
Yes, and the problem still exists.
### Bug Description
Stock Ender 5 Plus Printer with no changes / upgrades whatsoever. Downloaded the latest bugfi…
-
Hello. Thank you for the firmware branch. I got my BL Touch installed on my Sapphire Pro... and I got the Z-offset set. However, I am running into few issues:
Essentially, it appears the Z-offse…
-
hello! Sorry for my bad English.
I`m use AUTO_BED_LEVELING_BILINEAR function on Sapphire Pro with 3DTouch.
firmware 2.0.1
G29 is work:
SENDING:M420 V
Bilinear Leveling Grid:
0 1 …
-
(DE) Hallo knutwurst, ich habe alle Schritte genau befolgt, jedoch spinnt mein Kossel Linear Plus (keine Ultrabase, Probe Typ 1 mit -19.00 Offset ) beim Auto-Bed-Leveling (Configuration -> Delta Calib…
-
When auto bed leveling, possibly as I have installed a larger carriage, the carriage hits the frame of the printer. This is additionally problematic as my bltouch probe is positioned on the right side…
-
Let me know if I have done it wrongly.
Z endstop both min and max is connected to mechanical switch.
Test with G31 return
Z-probe state:L (result similar for both trigger and non trigger.
Test wit…
-
Printer: Qidi Q1 Pro
Firmware: 4.4.21
Problem: The print head is either too close to or too far from the bed.
Details:
When I start a print, the printer automatically cleans the nozzle and cal…
-
Hello
**Describe the bug**
I have followed your procedure step by step
G28
G29
G1 X110 Y110 Z5
Lowered the head and got the value of the Z & added M851 - Z-2.7 (in my printer)
M500
Tested:…
-
### Description
I Installed an BTT SKR MINI E3 V1.2 and the BL on a Ender 3 but when I try to do a Z Homing the Z axis is far apart from the bed and the BLT activate 3 times, and then appear a M9…