-
Hey,
I just received my Badgy Rev 2C a few days ago. I tried to modify the "Hello" sketch but had issues uploading it onto the device. The connection was somewhat unreliable so I had to restart the…
-
When I try to install Badgy using Homebrew and following the steps on ReadMe, I got this error:
```
brew install badgy
Updating Homebrew...
Error: No available formula with the name "badgy"
==>…
-
I'd like to use this with [Badgy rev 2C](https://github.com/sqfmi/badgy) which I think requires a new version of the epaper2in9 driver. Does that sound right? If so, any tips on modifying it before I …
-
Are the schematics or the PCB layout pubilshed anywhere or will there be badgies available on tindie again? Thanks
-
Rev 2c was able connect, to wifi network, I can see ESP_AC9D8A as a connected device in the router connected list.
however badgy seems to be going in loop with it blinking from "Hello badgy" and a b…
-
I wanted to put my badgy in a nice 3d printed casing. Does anyone have a fitting 3d model?
-
Is badgy supported by esphome? Does anyone have config files if so?
@chunkysteveo you tagged a post with `esphome` [here](https://www.instagram.com/p/CgJeIZorzWx/)
The waveshare eink displays se…
-
This isn't an issue, but not sure where else to talk about this.
I just finished proof of concept of a Check-in security badge we use at our Church.
https://github.com/pastorhudson/PCOBadge
Wh…
-
I've got ideas for Badgy that require me to connect to a GPIO pin (e.g. a 1-wire digital temperature sensor). I see that GPIO9 seems to be free. Can I solder to it or is it used internally by the pack…
-
Set up badgy on USB power, things behave as expected. Board LED glows flickers blue. Board boots up.
Popped a LIR2450 in with no USB connection and... nothing. Won't wake up, won't reset for new sk…