-
### Describe the enhancement you're suggesting.
The FindMy Flipper app should be able to send its battery level when it clones a Samsung SmartTag. For the moment, battery power is only available via …
-
# Problem
Currently, handling connections in libquotient-based clients is complicated.
To log in a client, the flow is roughly:
- Create a `Connection` object
- run `Connection::resolveServer(…
-
### Description
The bibliography does not show on the HTML version
### (Optional:) Please add any files, screenshots, or other information here.
_No response_
### (Required) What is this issue mos…
-
Basically Laptops battery drains relatively faster and there is no apparent notification except that blinking on battery sign so battery management is a bit difficult
it would be very nice if there…
-
I find my Surface only gets about 1.5 hours of battery life from a full charge in macOS. I've done the best I can to disable spotlight, turn on low power mode, etc, but it's still sipping quite a bit …
-
### Checklist
- [X] I have filled out the template to the best of my ability.
- [X] I have understood that this integration is only about battery management systems with Bluetooth Low Energy support.…
-
Does it make sense to have the device field rechargable?
I don't know our power budget yet, but if it's really just using a teeny tiny LiPo, then there could be an "If you care, bring a power bank …
-
- We need to implement a new battery management system in YouBot to use hot-swap of battery.
-
The PMID pin of the BQ25895M chip provides the boosted output providing the OTG pin is high and Vbus is disconnected.
So with an input at the usb port the device will provide power management to us…
-
Replace the sector cable with an external battery, and test at each Arduino starting that the battery tension is still enough