-
Bltouch does not work properly constantly gives different offset values Evan when done back to back , destroyed my print bed , ill stick to mainline klipper and use one firmware to proz z offset , th…
-
Steps to reproduce:
- baby step z offset via fluid
- click save and apply
- error is displayed
Reason:
[bltouch] section needs to be in printer.cfg and not in a seperate file
please see:…
-
I bought a bltouch, but it does not calibrate correctly, since there is a large gap from the nozzle to the table ! Where and how can this be changed?! Or do I need to flash it?
-
I have a BLTouch, I just need to install and set it up.
Here's the best video I've seen on the process: https://www.youtube.com/watch?v=NDe6QXreBNs
And maybe consider adding on a few plugins to …
-
Hi!
After a few month does my 3D-Touch no trigger.
It was a few times, that Klipper say´s BLTouch malfunktion.
Only power off and on does fix the error.
But now does not work.
BLTOUCH_DEBUG COM…
-
Having issue with Bltouch on newly installed EBB SB2209 RP2040 on manta m8p canbus. I'm able to manually pin up and pin down. but wont sense pin up doing touch mode. everything else works on the eb…
-
I upgraded my fully functional ender 3 creality board 4.2.7 to a SKR mini 3.0 (NOT 3.0.1) that was using a BLTouch.
I verified my config with issuing the klipper debug commands BLTOUCH_DEBUG COMMA…
-
So I just recently installed a BIQU MicroProbe V2
Double checked that pins match with that on board
Followed directions from instructions provided
Previously, I did have a BL touch that worked fine…
-
### Is your feature request related to a problem? Please describe.
I need a working firmware for my configuration, both the board and the display 3D-принтер Creality Ender 3 V2+BIGTREETECH-TFT35-V3.…
-
Goodnight,
I would like a photo showing how I connect the BLTouch cables to the board, and which Pin I put in the Marlin.