-
### Describe the issue you are experiencing
I have a Raspberry Pi 3B and a 3B+
Using both Raspberry Pi Imager and Balena Etcher:
The 3B can boot HAOS, Octoprint, Pi OS
The 3B+ can boot Pi OS…
-
#### Overview of the Issue
Is the Zero 2 W supported? I have tried the premade image for the pi3 but the zero 2 won't boot with it. I have tried Pi OS Lite 64bit Bookworm and Bullseye. They both han…
-
Thanks so much Robert for this great script, on a local install on a headless setup on a raspberry pi it works perfectly, however only when I launch the script from a VNC environment.
I am having d…
-
#### What were you doing?
I edited the fullpageos.txt file to have http://localhost/fullpagedashboard, as indicated by the setup page. I then went to the fullpagedashboard.txt file and put in the s…
-
### What happened?
Hi there,
Not sure if this is intended, but when flashing a new image of a Pi Zero W Bullseye OS Lite, it seems that the autologin is not configured..
I feel it should have autol…
-
hello,
when i try to add user overlays to enable I2S i get:
`volumio@volumiopi:~/tas5805m-for-raspbian-paspberry-pi-zero$ sudo ./compile-overlay.sh
./compile-overlay.sh: line 3: dtc: command no…
-
[https://www.raspberrypi.com/documentation/computers/raspberry-pi.html#boot-diagnostics-on-the-raspberry-pi-4](https://www.raspberrypi.com/documentation/computers/raspberry-pi.html#boot-diagnostics-on…
-
Hoi !
Sorry to bother you, but I'm trying to boot NixOS without any SD card on my Raspberry Pi 4.
I tried to search on the Internet for some information, but nobody has written anything about bo…
-
Please consider looking into adding platform support for the new RP2350 MCU and the Raspberry Pi Pico 2 development board.
RP2350 is the successor and next-generation of RPi RP2040 so guess would n…
Hedda updated
14 hours ago
-
### Describe the bug
Using the dtoverlay=googlevoicehat-soundcard with the INMP411 microphone module, audio recording works on Raspberry Pi 3 but not on Raspberry Pi 5. Despite identical hardware and…