-
Hi,
What do I need to do in order to make CANiBus work with SparkFun Arduino CANBus Shield ?
The shield supports storing CAN packets on an SD card. Can I use that dump with CANiBus to analyze?
-
Hi
is possible add support for CANbus to this framework? boards like ReARM with lpc1768, have native support in certain pins, like the exposes in the RAMPs shield in the i2c port.
greetings
-
Hi,
I'm testing canbus using DUE and transceiver sn65hvd230 shield.
I have a canbus network as follows;
CANBUS NETWORK:
- 2 arduinos NANO with MCP2515
- 1 arduino MEGA 2560 with MCP2515
- 1 a…
-
Hello. Use two Arduinos: leonardo and mega 2560 with [similar shield](https://wiki.seeedstudio.com/CAN-BUS_Shield_V2.0/)
For Leonardo in sketch change pins assignment to:
```
const int SPI_CS_PIN…
-
Hello
I'm trying to use canhacker with canbus-monitor. I have two boards, an Seeed studio can shield and a MKR GSM with MKR Can shield, and the seeed studio can shield can conect to can hacker withou…
-
Hi.
First of all, thanks a lot for creating such a great project like diyBMS.
I am assembling my own energy storage and I have reached the stage where I want to connect diyBMS with Cerbo GX from…
-
Hello,
I'm hoping you might be able to point me in the right direction. I'm using an Arduino Uno with SeeedStudio's CANBUS Shield. I am able to build and upload the sketch, and was able to install …
-
Hi there, is there anyway to drop a particular message (not pass through the bridge) . i.e. drop 1AC#1122334455667788 but let all other messages pass through including messages on the same id 1AC but …
-
Hello @collin80 ,
We are looking for using due_can library for our project, We have Arduino due and we are new to CAN protocol.
We need some clarity on how to use your library .
1. Is there any hardw…
-
hey there, following your project for a while, great progress!
how are those docs coming along ;) ?
im trying to use the interface library with nodered (nodejs based IOT graphical play thingy) t…