-
**To Reproduce**
```bash
hw connect
hw factory_reset --force
hw connect
hw slot change -s 1
hw slot init -s 1 -t MIFARE_4096
hw slot init -s 1 -t MIFARE_4096
hw slot init -s 1 -t MIFARE_4096…
-
Recently got a myself a Chameleon Ultra, using the Gui i was able to emulate, write and copy HF cards. Although, all of the LF rfid cards i have tried to emulate do not seem to work. I've tried a hand…
-
I’ve got some t5577 tags em4100 and the chameleon ultra can read them if I write them from my flipper to pac/stanley only the flipper recognises them has anyone encountered this before am I doing som…
-
Pyramid card is Wiegand communication protocol and it is already realized in Proxmark3 repo, so idea is add this code to Chameleon Ultra.
Here is file in proxmark repo - "wiegand.c" (full link is htt…
-
I can't seam to pair CU to my iPhone 13..
1. I open Chameleon Ultra GUI on the iPhone
2. On the home page I see "Connect"
3. I click A or B CU buttons to wake it up
4. I click on "refresh" butto…
-
1. I used the Chameleon Ultra GUI to do a firmware update for the chameleon.
2.The chameleon hardware started flashing two green lights, I waited for about 20 minutes, the green light was still fla…
-
Is there any chance of adding support for Pyramid tags in Chameleon?
For example, I have some Pyramid tags - I can read them successfully with a Proxmark RDV4:
```
[usb] pm3 --> lf pyramid read…
-
Sometimes the reader needs to update the card. Does chameleon ultra support this?
exhau updated
8 months ago
-
Could be possible to implement fido2 or u2f in the chameleon ultra hardware? or it has any hardware limitation?
-
Hi, I used the code from the following video to run my ultra chameleon: https://www.youtube.com/watch?v=VGpAeitNXH0
It worked perfectly, however, after playing around with the MTools Lite with my cha…