-
Please provide controls to disable the LEDs (both for RoomSense and the ClimateSense attachment), so the device can be used in a bedroom or other dark space (such as media room) where the flashing lig…
-
Is it possible to use this library to control 1 color LEDs (1 per channel) instead of RGB Leds like in the example?
-
I’m working on a project where I need to control the onboard RGB LED (e.g., the one in the GPS module) during certain phases of flight, such as during a drone show. Is there any existing feature in MA…
-
Do you have any pointers on disabling or controlling the LEDs of the SJ201? I want to bring new life to the MyCroft 2 DevKit, but so far the LEDs are just cycling all the time, which makes the device …
-
* **I'm submitting a ...**
- [ ] bug report
- [x] feature request
* **What is the current status?**
This is not yet implemented afaik. There is a way to generate square waves, but that's a…
-
Summary: I would like to request the addition of a feature in WLED that allows it to accept an input signal from the data line of external lights, such as Govee lights, on one of the ESP32's data pins…
-
Explain how to control the status LEDs from Erle-Brain 2 with the Robot Operating System (ROS)
-
I see the Teensy-LC has pin 24 and 25 which seem unused. Can these be routed to control two more leds?
![PXL_20220601_045426361 MP](https://user-images.githubusercontent.com/505582/171332625-f246bc…
-
### What actions were attempted?
Fire the Single Shot wrist blaster.
### What actually happened?
The BARREL LED flashed once at the end of the firing sequence.
### What was expected?
The BARREL L…
-
- [x] When available buy the Blinkin' LED driver
- [ ] Instal LEDs onto robot
- [ ] Test controlling the LEDs using code
- [ ] Integrate the LEDs into the teleop code linked to #11